Direct answer: The head driver board on a solvent flex machine, often called the fire board by technicians, is the part of the carriage electronics that supplies and controls the electrical energy that makes each Konica, Ricoh or Seiko printhead fire. It takes regulated power from the carriage power supply, produces the stable drive voltage set for each head, switches it according to the timing and data received from the head carriage board, and protects the heads from abnormal voltage. On some board systems it is a separate plug-in board for each head or head pair; on others it is a section built into the main carriage board. When it fails, you see weak or uneven jetting, nozzle dropouts on a group of heads, heads overheating or, in the worst case, damaged printheads.
Knowing how the flex machine head driver board works helps you protect expensive Konica heads and diagnose weak firing before it turns into a costly failure.

Table of Contents
This guide explains in plain language what the head driver board does on 10 ft and 16 ft solvent flex machines in India, why it matters so much for head life, and how it fits with the other boards. It is the first part of our head driver board series and builds on our flex machine head carriage board guide. Board layouts differ between BYHX, Hoson and other systems, so always confirm details for your exact machine with your supplier or manufacturer.
Why the word “fire board” is used
Inkjet heads “fire” droplets. Each nozzle contains a tiny piezoelectric element that flexes when a voltage pulse is applied, pushing a droplet out of the nozzle. The circuit that delivers these pulses is therefore called the firing circuit, and the board that carries it is often called the fire board. On Epson-head eco-solvent machines, the fire board typically generates the complete drive waveform for the heads. On Konica-head flex machines, many heads contain part of their driver circuitry inside the head itself, while the board side supplies the regulated drive voltage, timing and control. Different manufacturers and technicians therefore use different names:
- Head driver board or driver board
- Fire board or firing board
- Head voltage board or HV board
- Transfer board or adapter board (when the driver parts sit on the small board above each head)
- Driver section of the head board (when integrated)
Whatever the name, the function is the same: get the right amount of electrical energy to each head at exactly the right time, and nothing more.
How a piezo head fires, in simple terms
Konica KM512i and KM1024i heads, like most industrial heads used on solvent flex machines, are piezoelectric. Inside each head, rows of channels are lined with piezo material. When a voltage pulse is applied, the material deforms, changing the volume of the ink channel and pushing a droplet out. When the pulse ends, the channel refills. The size and speed of the droplet depend on:
- The drive voltage (higher voltage generally means faster, larger drops)
- The shape and timing of the pulse (the waveform)
- Ink viscosity, which depends on ink type and temperature
- The head’s own characteristics, which vary slightly from head to head
Because every head is slightly different, manufacturers test each head and specify its correct drive voltage on the head label or test sheet. The head driver board’s most important job is to deliver that voltage accurately and consistently to each head.
What a flex machine head driver board actually does
- Receives power: It takes DC power from the carriage power supply, usually through dedicated power cables.
- Regulates drive voltage: It converts and regulates that power into the drive voltage required by each head, according to the value set in the software.
- Switches with timing: It works with the head carriage board so that drive energy is available exactly when each nozzle row needs to fire, in step with carriage position.
- Handles heavy current pulses: When many nozzles fire together, such as when printing solid areas, current demand rises sharply. The driver section must supply these pulses without the voltage dropping.
- Protects heads: Fuses, protection components and monitoring help prevent abnormal voltage from reaching heads, although protection is never perfect.
- Supports temperature control: On some systems the same board or section also drives head heaters and reads temperature sensors.
Where it sits on a flex machine
| Layout | Description | Typical on |
|---|---|---|
| Integrated | Driver circuits built into the main head carriage board | Many 4-head machines and some 8-head systems |
| Separate driver board | A plug-in board on the carriage, connected to the head board | Some 8-head systems |
| Per-head transfer boards | Small boards above each head carry part of the driver and protection circuitry | Many Konica systems |
| Combination | Voltage regulation on one board, switching on transfer boards | Varies by board brand and version |
Look at your carriage with a technician and identify which layout your machine uses. This determines what you need to replace if the driver section fails and how you plan spares.
Why the head driver board matters for head life
A Konica head is one of the most expensive parts of a flex machine. Indian listings in late 2026 show new KM512i heads at roughly ₹57,000 to ₹86,000 each, and an 8-head machine carries eight of them. The head driver board directly controls the electrical stress on these heads. If it delivers the correct voltage cleanly, heads can last a long time. If it delivers too much voltage, unstable voltage or noisy pulses, heads wear faster, nozzles fail and heads can be destroyed.
Common ways a driver section shortens head life include:
- Voltage drifting higher than set due to a failing regulator
- Voltage spikes or ringing on the drive pulses
- One driver channel failing short and applying continuous voltage
- Poor regulation causing voltage drop during solid printing, prompting operators to raise settings
- Overheating that changes component behaviour
Head driver board vs head carriage board
The head carriage board handles data: it receives print information from the mainboard, splits it per head and tells each head which nozzles to fire. The head driver board handles energy: it provides the voltage that makes the firing happen. A simple analogy: the carriage board is the conductor reading the music, and the driver board is the power that lets the orchestra play. If the carriage board fails, heads may not know what to print. If the driver section fails, heads may know what to print but cannot fire properly.
Our article on head driver board vs head board vs mainboard explains the full electronics chain.
Typical symptoms of a head driver board problem
| Symptom | Why it points to the driver |
|---|---|
| Weak or faded printing on a group of heads with correct settings | Drive voltage to that group may be low or unstable |
| Nozzle dropout increases during solid areas | Voltage sags under heavy current demand |
| Heads run hotter than usual | Excess voltage or continuous drive on a channel |
| A new head fails soon after installation | Driver channel may be applying abnormal voltage |
| Burnt smell, discoloured components, blown fuse | Driver component failure |
| Printing changes as the carriage warms up | Heat-sensitive driver or regulator components |
These symptoms can also come from heads, cables, ink and settings. Our article on head driver board failure signs explains how to tell the difference.
The role of head voltage settings
The software lets you set a drive voltage for each head. The head driver board then tries to deliver that value. This makes voltage settings one of the most important controls on the machine:
- Each head should be set to the value on its label or test sheet
- Small adjustments to balance density between heads should be made only within supplier guidance
- When a head is replaced, its new voltage must be entered before printing
- Raising voltage to compensate for weak printing hides real problems and shortens head life
Our guide to Konica 512i head voltage settings covers this in detail.
Power quality: the driver board’s biggest external enemy
The head driver board depends on clean, stable power. In many Indian flex units, supply voltage fluctuates widely, earthing is weak and heavy loads such as heaters, compressors and welding machines share the same supply. Surges can pass through the power supply and stress driver components. Poor earthing can add noise to the drive pulses, causing random firing. Protecting the driver board starts with:
- A properly rated servo stabiliser for the machine
- A good earth pit with low resistance, checked periodically
- Surge protection on the incoming supply
- Separate circuits for heavy equipment
- Avoiding power-up immediately after power returns from a cut
We cover this in depth in our article on power fluctuation, stabilisers and earthing for flex machines.
Heat: the second enemy
Driver components handle significant current and produce heat. They are usually mounted with heat sinks and rely on the carriage fan for cooling. Dust, flex fibres and ink mist can coat heat sinks and block airflow. In summer, shed temperatures in many parts of India exceed 40°C, reducing cooling margins further. Overheated driver components drift, fail early and can damage heads. A working carriage fan and regular dust cleaning are cheap insurance. See our guide on board cooling and dust in flex units.
Can operators check the head driver board?
Operators should not open or measure driver circuits. Voltages on these boards can be high enough to damage heads with a slip of a probe, and some parts can hold charge. However, operators can do useful checks:
- Confirm head voltage settings in the software match the head register
- Check that the carriage fan runs and airflow is not blocked
- Note symptoms carefully: which heads, when, and under what print conditions
- Check input voltage and stabiliser display readings
- Look and smell for overheating or burning with power off
Measurements of drive voltage and component testing should be left to a trained technician with suitable tools.
Spares planning for driver boards
If your machine uses separate driver or transfer boards, consider keeping at least one spare of each type, especially if you run several machines on the same board system. Per-head transfer boards are usually much cheaper than a complete carriage board, and a spare can turn a day-long breakdown into a fifteen-minute swap. If the driver section is integrated into the carriage board, a spare carriage board covers both. Our spare parts inventory guide helps you decide.
Head driver boards on different head types
Driver requirements differ between head types. KM512i and KM1024i heads have different nozzle counts, connectors and electrical requirements. Ricoh Gen5 and Seiko heads, used on some solvent machines, have their own drive schemes. A driver board or section designed for one head type is not interchangeable with another. When buying spares, always specify the head type, head count and board version, as explained in our guide to head driver board compatibility.
A real-world example
A 10 ft flex unit noticed that its cyan and magenta heads were printing lighter over several weeks, especially on large solid backgrounds for political hoardings. The operator increased voltages twice to compensate. Soon after, the magenta head failed. A technician found that the driver section for that head group had a failing component that caused voltage to sag under load. Raising the setting had pushed the voltage too high when the head was printing lighter areas, stressing the head. Replacing the driver section and the damaged head, and returning voltages to label values, solved the problem. The lesson: weak printing with correct settings is a reason to investigate, not to raise voltage.
Greyscale printing and the driver section
Many modern flex machines print in greyscale mode, where each nozzle can produce more than one drop size. Instead of a single on-or-off pulse, the system uses different pulse patterns to create small, medium and large drops. This gives smoother gradients and sharper text, which customers notice on shop boards and indoor displays. Greyscale printing places extra demands on the head driver board: pulse timing must be more precise, and voltage must stay stable across rapid changes in firing patterns. A driver section that is marginal may still work in binary mode but show banding, grainy gradients or missing fine detail in greyscale modes. If greyscale quality has deteriorated while binary modes look acceptable, the driver section is one of the areas a technician should examine, alongside head condition and ink temperature.
This is also why replacement boards should match the original’s greyscale capability. Fitting a binary-only board to a machine built for greyscale can remove print modes your customers rely on.
Questions to ask when buying a flex machine
- Is the head driver section integrated or on separate boards?
- Are spare driver or transfer boards available locally?
- What protection does the board system include for heads?
- What cooling is provided for the carriage electronics?
- Does the software show head voltage and temperature per head?
- Will the supplier train operators on voltage settings?
These questions rarely feature in sales brochures, but they strongly affect long-term running costs.
Driver section care in daily operation
Operators influence driver board life every day without realising it. Running heads at their correct label voltages, letting the machine warm up before heavy jobs, keeping the carriage fan clear, wiping ink spills promptly and switching off during storms all reduce stress on the driver section. Equally, habits such as raising voltage to rush a job, unplugging cables with power on or leaving the carriage cover open in a dusty shed shorten its life. A short briefing for every new operator, covering these do’s and don’ts, is one of the cheapest forms of protection a flex unit can buy.
Further reading: Konica heads fire using piezoelectricity, where a voltage pulse makes a crystal material flex and push out an ink drop.
Key takeaways
- The head driver board, or fire board, supplies and controls the energy that makes each head fire.
- It may be integrated into the carriage board, a separate board, or spread across per-head transfer boards.
- Correct, stable drive voltage is essential for print quality and head life.
- Power quality and heat are the driver board’s biggest external threats.
- Weak printing with correct settings is a warning sign; do not compensate by raising voltage.
Want to understand the driver electronics on your flex machine? Contact Unified Engineering Dynamics with your machine details for guidance on head driver boards, voltage settings and spares.
More in the flex head driver board series
- Head Driver Board vs Head Board vs Mainboard
- Head Driver Board Failure Signs
- Why a Bad Driver Board Can Kill a New Konica Head
- Konica 512i Head Voltage Settings
- Head Driver Board Compatibility: Konica, Ricoh, Seiko
- Head Driver Board Repair vs Replacement
- Power Fluctuation, Stabilizer and Earthing Guide
- Board Cooling and Dust: Preventing Overheating
Related reading on our site: Konica KM512i printhead price and lifespan, KM512i vs KM1024i printheads, flex printer mainboard and head board buyer checks, data and printhead cable handling and the flex printing machine maintenance checklist.
Running an Epson-head eco-solvent machine as well? Our sister series starts with the eco-solvent head carriage board guide and the complete guide to eco-solvent printer electronics.
Frequently Asked Questions
Is the fire board the same as the head driver board on a flex machine?
Usually yes. Fire board, head driver board and driver board are names for the circuitry that supplies firing energy to the heads. On many Konica machines it is integrated into the carriage board or spread across transfer boards.
Does every flex machine have a separate head driver board?
No. Some machines integrate the driver circuits into the main head carriage board, while others use separate driver or transfer boards. Check your machine’s layout with a technician.
Can a faulty head driver board damage Konica heads?
Yes. Excess, unstable or continuous voltage from a faulty driver section can shorten head life or destroy heads. That is why driver faults should be fixed promptly.
Why should I not increase head voltage to fix faded printing?
Faded printing with correct settings often signals a problem such as voltage sag, ink issues or head wear. Raising voltage hides the cause and can overstress heads.
How can I protect the head driver board?
Use a properly rated stabiliser, good earthing, surge protection, a working carriage fan, regular dust cleaning and correct head voltage settings.
Is a KM512i driver board compatible with KM1024i heads?
No. Different head types have different electrical requirements and connectors. Driver boards must match the head type, head count and board version.
Can operators test the head driver board?
Operators should only check settings, fan operation and symptoms. Voltage measurements and component tests should be done by a trained technician.
Should I keep spare transfer or driver boards?
If your machine uses separate driver or transfer boards, a spare is often worthwhile, especially for multi-machine units, because it allows a quick swap during breakdowns.