Quick answer: Some suppliers describe Roland printhead part 6701409010 as “DX6,” while others use “DX7” for the same number and list models including the VS-640 or BN-20. Those labels are inconsistent market descriptions—not a safe way to select a replacement. Ask Roland or an authorised service provider to confirm the correct assembly for your exact printer, serial and current configuration.
Why VS-640 and BN-20 owners see conflicting answers
An owner searching for a Roland head can encounter listings that look authoritative but use different DX names. One VS-640 supplier listing calls 6701409010 DX6. Another supplier listing uses DX7 for that number and names VS-640 and BN-20 among its examples.
A technical discussion among owners and technicians also documents the disagreement. It is useful evidence that naming is inconsistent, but forum comments are not a substitute for Roland’s current parts confirmation.
The practical answer is the exact approved Roland assembly—not which seller’s DX label sounds more convincing. The conflicting descriptions do not prove that different part numbers are interchangeable or establish a universal DX6-to-DX7 upgrade.
What the examples show
| Printer example | What supplier material reports | What the owner must verify |
|---|---|---|
| Roland VS-640 | One seller labels 6701409010 DX6; another calls it DX7. | Exact serial, installed configuration, ink and current Roland-approved assembly. |
| Roland BN-20 | Some seller material associates it with 6701409010, often using the DX7 label. | Exact BN-20 configuration, part scope and current manufacturer confirmation. |
| Other VS, RA, RE or RF models | Individual listings name several models. | Do not extend the claim to an entire family without checking the actual suffix and serial. |
These are seller-listed associations, not an official compatibility chart. A provider’s broad list can contain different assembly scopes or be outdated.
VS-640 and BN-20: Different workflows, same need for exact identification
A VS-640 and a BN-20 serve different shop and production contexts. For both, the owner should record the exact model, serial, approved ink, installed head and service history. Do not infer a replacement from the machine’s appearance or width alone.
If a shop uses a print-and-cut workflow, a finished decal can be affected by artwork, registration marks, media feed, printing and cutting. A contour-cut mismatch does not automatically prove that a head failed. Keep the approved file and final dimensions and ask the service provider to test the actual workflow.
A successful technical test is also distinct from customer approval of colour, dimensions and finishing. Agree the representative material and quality criteria before service when practical.
How to use 6701409010 correctly
Treat 6701409010 as a specific part-number lead that appears in supplier material—not as an automatic instruction to buy. Ask Roland or its authorised provider:
- Is this the currently approved assembly for my exact printer serial and revision?
- Has the part number been superseded for this configuration?
- What does the assembly include?
- Which ink, board, cable and maintenance components are approved?
- Who is authorised to install and test it?
- What warranty and return terms apply?
If a supplier gives a different number, ask the manufacturer whether it is an approved replacement. Do not merge reseller cross-references or assume two differently numbered heads are interchangeable.
Is DX6 a cheaper replacement for DX7?
Do not make that assumption. The words may be used inconsistently, and a lower-price item can be a different part, condition or service scope. A supported substitution must be confirmed for the complete machine: mounting, electronics, firmware, ink, maintenance station and service procedure.
If the manufacturer does not support the proposed combination, a physical fit or seller’s assurance is not enough. Do not attempt a firmware workaround or an improvised conversion to make an uncertain head operate.
Verify the ink and maintenance system
Use the exact ink and maintenance products approved for the installed printer and head. Eco-solvent formulations are not automatically interchangeable. A change can affect the head, dampers, tubing, seals, pump and service support.
Do not mix inks or use a generic flushing procedure. Ask Roland or an authorised provider to assess any proposed conversion and document the approved method, warranty and related parts. A used machine may have a prior conversion that changes the current configuration.
Keep current safety data sheets for the actual ink and cleaning products. Qualified professionals should assess ventilation, storage, fire precautions, spills, protective equipment and waste under applicable local requirements.
Diagnose the symptom before ordering
Missing lines, weak colour, banding or an error may involve ink delivery, maintenance, the head, electronics, media, artwork or settings. A nozzle pattern is useful evidence at the time of testing but is not a complete diagnosis.
Record the model, serial, ink, job, media, print mode, exact message and last accepted output. Note recent service, transport or a long idle period without assuming causation. Retain a physical sample if it can be produced safely.
Follow only operator checks authorised by the exact manual. Repeated aggressive cleaning, unapproved fluids or forced carriage movement can create damage or hazards. If the issue persists, ask an authorised technician for a written diagnostic scope.
Print-and-cut quality checks
Where the job is cut after printing, define the file, scale, registration marks, media and final dimensions. A mismatch can arise in the source artwork, mark reading, media movement, printer output or cutting system. Test the complete approved workflow rather than replacing a head from one symptom.
After service, use representative artwork and the intended media. Compare print quality and final cut with the customer’s approved proof. Record profile, mode and any accepted variation. A technician’s machine test and the customer’s finished-job approval are separate decisions.
Safety and service responsibilities
Printhead service can involve ink, electrical connections and moving equipment. Only trained and authorised personnel should use the manufacturer’s isolation, installation and configuration procedure. Do not bypass guards, open electrical panels or disconnect an ink path outside your authority.
Stop under the site procedure for a leak, damaged cable, smoke, burning smell or unsafe carriage movement. Do not continue a hazardous test to meet a deadline. Qualified professionals determine the site’s chemical, ventilation and electrical controls for the actual products and equipment.
Compare supplier quotations
Ask each provider to state:
- Exact printer, serial, part number and assembly scope.
- Whether the part is genuine, compatible, refurbished or used.
- Approved ink, board, cable and maintenance requirements.
- Diagnosis and any remaining uncertainty.
- Freight, taxes, authorised labour and configuration.
- Acceptance test, warranty exclusions and return terms.
A head-only offer is not directly comparable with a complete service quote. A supplier’s DX6 or DX7 label should not be the only basis for choosing between them.
Hypothetical cost example
Suppose diagnosis costs Rs 1,000, an assembly costs Rs 20,000 and authorised service costs Rs 3,000. The illustrative subtotal is Rs 24,000 before freight, taxes, ink, downtime and other costs. These invented values are not market prices for 6701409010. Use current written quotations for the exact machine.
Ask what happens if the original symptom remains or another component is found faulty. Agree who approves additional work and how customer deadlines will be handled.
Acceptance after authorised replacement
Agree the original symptom, test file, ink, media and quality criteria before work where practical. Qualified personnel should restore guards and protective systems and perform the manufacturer’s approved checks.
Print representative work and inspect the original defect. If the order involves cutting, verify the combined workflow on the intended material. Retain the technician’s report, part number, settings and sample.
A successful short print provides evidence for those conditions, not a guarantee of future head life. For an intermittent issue, agree a safe follow-up and escalation plan.
Common mistakes
- Ordering by DX6 or DX7 alone: Confirm the manufacturer-approved part number and machine serial.
- Assuming two seller labels mean two interchangeable parts: Ask Roland to identify the actual assembly.
- Replacing from one nozzle symptom: Diagnose the complete ink, maintenance and electronics system.
- Confusing a cut mismatch with a head fault: Test artwork, marks, media and cutter settings.
- Using unapproved ink or fluids: Follow the exact manufacturer guidance.
- Comparing only head prices: Include diagnosis, authorised labour, related parts and testing.
- Assuming a fixed lifespan or warranty: Review the written conditions for the actual offer.
Questions for the provider
- What is the current approved head assembly for my exact printer serial?
- Is 6701409010 applicable to this configuration or has it been superseded?
- What ink, board, cable and maintenance components are required?
- What evidence supports replacing the head?
- What is included in installation, testing and warranty?
- How will an affected print-and-cut job be verified?
- What happens if the original symptom remains?
Related printhead guides
For printer-model examples, see DX printhead printer models. For the naming and history context, read DX4, DX5, DX6 and DX7 comparison. Confirm the exact assembly with the printer manufacturer.
Frequently Asked Questions
Does Roland VS-640 use a DX6 or DX7 head?
Different sellers use both labels for part number 6701409010. Ask Roland or an authorised provider for the approved assembly for your exact serial and configuration.
Is 6701409010 listed for BN-20?
Some seller material associates the number with BN-20, but confirm the actual machine configuration and current approved part with Roland or an authorised provider.
Are DX6 and DX7 heads interchangeable?
Do not assume so. Market labels are inconsistent, and any substitution must be documented for the complete printer and ink system.
Does a contour-cut mismatch mean the head failed?
No. Artwork, registration marks, media feed and the cutter can also affect the finished result.
Can I use any eco-solvent ink?
No. Use the exact ink and maintenance products approved for the installed machine and head system.
How long will a replacement head last?
There is no universal lifetime. The exact part, ink, maintenance, environment and use vary. Review the written warranty conditions.
Can I install or flush the head myself?
Only personnel trained and authorised for the exact printer should perform work permitted by the manufacturer procedure. Electrical and ink-system service can be hazardous.
What to do when two sellers disagree
Send both sellers the same machine information: exact model, serial, current ink and installed configuration as confirmed by an authorised technician. Ask each to identify the manufacturer part number and the contents of the offer, including any related board, cable or maintenance components. Do not send account credentials or unnecessary customer files.
If one uses DX6 and another uses DX7 for the same number, record the disagreement instead of treating the names as separate guarantees. Ask Roland or an authorised provider to confirm the assembly for the machine. If they propose different numbers, ask whether either is an approved replacement or documented supersession for the serial.
Keep the written answer with the quote. A part that looks the same or has a similar connector may have different requirements. A supplier’s title cannot establish electrical, mechanical or ink compatibility.
Review the printer’s current configuration
A used VS-640 or BN-20 may have previous service, an authorised conversion or an undocumented modification. Request the invoice and service history and identify the current approved ink and maintenance products. The original marketing description may not capture the machine’s present configuration.
If documentation is incomplete, ask an authorised technician to inspect safely and consult the manufacturer. Do not open electrical panels or disconnect ink lines merely to match a part photograph. Missing history creates uncertainty but does not prove that a head is defective.
After an approved modification, update the machine record, spare inventory and operator instructions. Keep former and current part numbers distinct. A component purchased for an earlier configuration should not be installed on the revised system without confirmation.
Plan a meaningful before-and-after test
Agree a representative file, approved ink and media, print mode and acceptance criteria with the technician. If the reported problem appears only after idle time or during a longer run, record that context and ask the provider to define an appropriate safe observation. Do not reproduce a hazardous leak or movement for a demonstration.
Retain the last accepted output and the defective sample if safely available. Compare the source artwork and RIP preview when the defect may be file-related. Record the exact error or colour symptom without declaring a failed head before diagnosis.
After authorised service, confirm guards and protective systems are restored. Inspect a representative print and, where relevant, the complete print-and-cut result. A successful short sample demonstrates performance under those conditions, not a universal head lifetime or future production guarantee.
Review warranty and return conditions
Ask whether the supplier requires authorised installation, approved ink, a service report or other evidence for a claim. Confirm the warranty start and exclusions. Clarify return freight and what happens if the delivered part is damaged, incorrectly identified or does not resolve the original symptom.
A warranty for the supplied component may not cover the printer, connected boards, customer reprints or downtime. Read the written terms rather than inferring those protections from a sales message. Keep the invoice, packaging identification and technician report.
If a refurbished or compatible item is proposed, ask what was inspected, the known prior ink exposure and the manufacturer’s support position. Do not select it solely because the label appears to match or the price is lower. The exact configuration and authorised service plan come first.
Protect an interrupted customer order
Identify the sheets or decals produced before the fault and those requiring reprint. Keep the approved artwork, registration marks, media, profile and final dimensions. A changed file or material can affect the result independently of the head.
Where a backup printer or cutter is used, compare output with the customer proof under agreed conditions. Obtain approval of any variation in colour, size or finishing and communicate the revised delivery. Customer acceptance and the technician’s equipment sign-off are separate steps.
Do not bypass a guard, force the carriage or use unapproved ink to avoid an outsourcing delay. A pre-qualified backup is useful only if its quality and service terms have been checked in advance.
A question to take to Roland
Ask the authorised provider to identify the approved head assembly for your exact serial and state whether 6701409010 or a documented replacement applies. Request the current ink, board, cable and maintenance requirements. This converts a confusing market-label question into a machine-specific service question.
If the answer differs from a reseller’s list, ask the reseller to reconcile the part number and package scope in writing before payment. Do not assume either listing guarantees compatibility or that a generic conversion is supported.
After service, update the machine record and inform each shift of the approved operating procedure. Retain the technician’s report and accepted sample. If the symptom returns, provide the new evidence rather than repeatedly replacing parts without diagnosis.
If a seller lists both VS-640 and BN-20, ask Roland or its authorised provider to confirm each serial separately. The shared market label is not a substitute for model-specific approval. Record the exact assembly and whether related items are included before comparing prices.
Keep the written part confirmation, authorised installation scope and accepted print with the service record for future reference.
Final takeaway
For VS-640 and BN-20, use DX6 and DX7 as search terms only. Confirm the exact Roland-approved part for the machine serial and current configuration, then use qualified diagnosis, authorised service and a representative print-and-cut acceptance test.