Flex Printing

4-Head vs 8-Head Carriage Boards: Upgrading a Flex Machine Without Changing the Mainboard

8-Head Carriage Board Upgrade: Is It Worth It?

Direct answer: A 4-head carriage board drives four Konica heads (usually one per colour) and an 8-head carriage board drives eight heads (usually two per colour) for roughly double the printing speed at the same quality. Upgrading a flex machine from four to eight heads without changing the mainboard is possible only if the existing mainboard, firmware and software already support eight heads, the carriage and head plate have space for the extra heads, and the power supply, ink system and data link can handle the extra load. On many machines the mainboard is designed for a fixed head count, so a true upgrade needs a matching 8H carriage board plus mechanical, ink and power changes. Always confirm with your board supplier before buying parts.

Before buying an 8-head carriage board for your existing flex machine, check whether the mainboard, carriage, ink system and power supply can actually support eight heads.

8-Head Carriage Board Upgrade: Is It Worth It?
8-Head Carriage Board Upgrade: Is It Worth It?

This guide explains how 4-head and 8-head carriage boards differ, what an upgrade really involves, what it costs in time and risk, and when it makes better business sense to buy a new or second machine instead. It is part of our series on flex machine electronics; for background, read what the head carriage board does and the comparison of BYHX, Hoson and Senyang carriage boards.

Why flex units think about 8 heads

In India, most entry-level 10 ft solvent flex machines run four Konica KM512i heads: cyan, magenta, yellow and black. They are reliable and affordable, but they can become a bottleneck when a unit wins bigger contracts: election campaigns, political hoardings, real-estate branding, festival advertising or wholesale work for other shops. An 8-head machine prints the same job in roughly half the passes, which can double output during rush periods.

Owners therefore ask a natural question: can we add four more heads and an 8H board to our current machine instead of buying a new one? The answer depends on the electronics and the machine design.

How 4H and 8H carriage boards differ

Feature4-head carriage board8-head carriage board
Heads drivenUp to 4Up to 8
Typical layout1 head per colour (CMYK)2 heads per colour, or CMYK + light colours on some systems
Data loadLowerAbout double; needs mainboard and data link support
Power and heatLowerHigher; more driver load, more heat on the carriage
Physical sizeSmallerLarger, or two boards
Typical speedBase speedRoughly 1.6–2× in comparable modes
Cost of boardLowerHigher

Some systems use one large 8H board; others use two 4H boards on the carriage with a single mainboard capable of addressing eight heads. If your machine already uses the second approach with only one board fitted, an upgrade may be simpler. If your mainboard is designed only for four heads, it usually is not.

The critical question: does your mainboard support 8 heads?

The mainboard prepares and sends print data for every head. If it was designed or configured for four heads, it may not have the processing capacity, memory, data channels or firmware support for eight. Some board systems are sold in “4H” and “8H” mainboard versions; others use the same mainboard with different firmware or licence settings.

To find out, check:

  • The mainboard label and version code
  • The head count options in your print control software (some show a maximum head count)
  • Your machine manufacturer’s documentation or supplier advice
  • Whether the manufacturer offered the same model in 4H and 8H versions with the same mainboard

If the mainboard does not support eight heads, the “upgrade” becomes a kit change: mainboard, carriage board, software and possibly firmware. That is a bigger project, covered in our upcoming main board series.

Mechanical requirements for an 8-head upgrade

Electronics are only one part of the job. The carriage must physically hold eight heads in correct alignment.

  • Head plate: Must have eight head positions machined accurately. Many 4-head machines have a plate with only four positions; others have eight positions with four unused.
  • Carriage size and weight: Eight heads, extra dampers and a larger board add weight. The carriage motor, belt and rail must handle it without vibration or loss of accuracy.
  • Capping station: Must have eight caps aligned with the new head positions. A four-cap station must be replaced.
  • Wiper: Must cover all eight heads.
  • Cable chain: Must have space for the extra head cables, ink tubes and data cables without overcrowding.

Ink system requirements

Eight heads need ink delivered to eight positions. This means extra dampers or sub-tanks, more ink tubes, possibly a larger ink pump capacity, updated negative pressure settings if used, and correct filter sizing. Ink consumption also rises with speed, so bulk ink tanks and supply logistics should be planned.

Power supply and heat

An 8H carriage board draws more power for head drive and heating. The carriage power supply must have enough capacity with a safety margin. More heads also produce more heat in the carriage. Check that the carriage fan and ventilation are adequate, and that dust filters are clean. Overheating is a common reason for random faults on upgraded machines, as discussed in our guide on head board failure symptoms.

8-head carriage board upgrade steps when the system supports it

If your supplier confirms that your mainboard and software support eight heads, the typical process looks like this. All steps should be done by a trained technician.

  1. Confirm the exact 8H carriage board model and version compatible with your mainboard and software.
  2. Prepare the head plate, capping station, wiper and dampers for eight heads.
  3. Install the 8H board and extra adapter boards, routing cables neatly through the cable chain.
  4. Install new heads with power off, recording each head’s serial number and voltage.
  5. Update software settings to eight heads and enter each head’s voltage.
  6. Prime the ink system and check for leaks before powering head electronics.
  7. Run nozzle checks on all heads.
  8. Perform mechanical head alignment, then software alignment and bi-directional calibration.
  9. Run test prints at multiple speeds and check for banding between head groups.
  10. Update spares stock: you now need spare cables, dampers and caps for eight positions.

After installation, follow our carriage board replacement checklist for verification steps.

Costs to plan for

An 8-head upgrade is more than the price of a board. Typical cost components include:

ItemNotes
8H carriage boardMust match mainboard; price varies by brand and version
Four additional Konica headsUsually the largest cost; new KM512i heads are a major investment
Adapter boards and head cablesOne set per added head
Head plate, capping station, wiperIf existing parts support only four heads
Dampers, tubes, fittingsFor four extra positions
Power supply upgradeIf current capacity is not enough
Technician labour and calibrationUsually one to several days
DowntimeLost production during the upgrade

When you add up four new heads, an 8H board, mechanical parts and downtime, the total can approach a significant share of the price of a new 8-head machine. Compare carefully before committing. Our 4 head vs 8 head flex printing machine guide compares complete machines.

Upgrade vs buying a new or second machine

OptionAdvantagesDisadvantages
Upgrade existing 4H to 8HUses existing frame and space; may cost less than a new machineCompatibility risk; mechanical changes; old parts remain; downtime
Buy a new 8H machineDesigned for 8 heads; warranty; latest electronicsHigher investment; needs space
Keep 4H and add a second machineRedundancy in breakdowns; flexibility; two jobs at onceMore space, power and operator time

Many flex units find that a second machine gives better business resilience. When one machine is down for a board or head problem, the other keeps orders moving, which matters greatly in election and festival seasons.

Risks unique to upgrades

  • Uneven head groups: Mixing old and new heads can create visible differences in density between head groups. Careful voltage and calibration settings reduce this, but heads at very different wear levels can still show banding.
  • Warranty concerns: Modifying a machine may affect manufacturer support. Check before you begin.
  • Firmware lock-in: Some manufacturers lock head count in firmware or software. Unlocking may require the manufacturer.
  • Increased mechanical stress: Extra weight may increase wear on the carriage belt and bearings.

Going from 8 heads to 4: a temporary fix

When an 8-head machine loses one head group due to a board or head failure, some systems allow printing temporarily with four heads by changing software settings. This keeps production going at lower speed while waiting for parts. Whether this is possible depends on your board system and software; ask your supplier in advance so you have a plan ready.

Worked capacity example

Consider a unit running a 10 ft, four-head Konica 512i machine. In its regular production mode, it prints a certain number of square feet per hour. With an 8-head carriage board and eight heads in a comparable mode, the same machine might print around 1.6 to 2 times as much per hour. If the unit is already busy for 14–16 hours a day during election season and turning away orders, that extra capacity has real value.

However, printing speed is only one part of throughput. Loading rolls, drying, cutting, eyeleting, welding and dispatch all take time. If finishing is already the bottleneck, doubling printing speed will not double output. Before investing in an 8-head carriage board, measure how many hours per day the printer actually prints versus waits for loading or finishing. Our guide to estimating flex printer production capacity provides a practical method.

KM512i or KM1024i for the upgrade?

Some owners consider moving to KM1024i heads during an upgrade. This is not an “add four heads” job. KM1024i heads need a different carriage board, usually a different or reconfigured mainboard, a different head plate and new software settings. In effect, it is a new electronic system on an old frame. It can make sense for a strong frame with good mechanics, but compare it carefully with buying a machine designed for KM1024i heads. Our comparison of KM512i vs KM1024i heads explains the differences in speed, quality and cost.

Pre-upgrade feasibility checklist

QuestionYes / NoNotes
Mainboard supports eight heads (confirmed by supplier)?☐Get written confirmation
Software allows eight heads without manufacturer unlock?☐Check settings and licence
Head plate has eight accurate positions?☐Or replacement plate available
Capping station and wiper for eight heads available?☐Check compatibility
Cable chain has space for extra cables and tubes?☐Avoid overcrowding
Carriage power supply has spare capacity?☐Technician to check
Ink system can supply eight positions?☐Pumps, dampers, filters
Finishing capacity can handle more output?☐Otherwise upgrade gains are limited
Budget covers heads, board, parts, labour and downtime?☐Compare with new machine

If you tick “No” on more than two of the first seven items, a new 8-head machine or a second machine is usually the more sensible path.

Operator and workflow changes after an upgrade

An 8-head machine is not just faster; it also needs slightly different habits. Operators must check twice as many nozzles in nozzle checks, clean twice as many caps and keep closer watch on ink levels because consumption rises. Calibration between head groups becomes important: if heads 1–4 and 5–8 are not perfectly aligned, banding appears at speed. Plan a short training session with your technician after the upgrade and update your maintenance checklist so that weekly and monthly tasks cover all eight positions.

How an 8-head carriage board changes your spares plan

Once a machine runs eight heads, its spares needs change. You now have eight head data cables, eight dampers, eight caps and twice the number of connectors that can fail. A single spare head cable is no longer enough for a busy unit; two or three are sensible. Dampers wear at a similar rate, so replacing them as a full set at planned intervals avoids repeated stoppages. Because a failure on an 8-head carriage board can affect half the heads or the whole carriage, a tested backup board becomes more valuable, particularly if you have more than one machine on the same board system.

It is also worth agreeing in advance with your supplier on what happens if the board fails in peak season: delivery time, loan boards or exchange options. A machine that prints twice as fast also loses twice as much production per hour when it stops.

Signs your current machine is a good upgrade candidate

  • The frame, rails and carriage are in good mechanical condition with little vibration
  • The machine was originally sold in both 4-head and 8-head versions by the same manufacturer
  • The mainboard and software already list eight heads as an option
  • Spare parts for the eight-head version are easy to obtain locally
  • Your finishing team can handle more output without new equipment

If most of these apply, an upgrade may be practical. If few apply, put the same budget towards a new or second machine.

Further reading: For background on how more nozzles translate into speed, see this general overview of inkjet printing technology.

Key takeaways

  • 8-head carriage boards drive twice as many heads and roughly double speed, but need mainboard, software, mechanical, ink and power support.
  • An upgrade without changing the mainboard works only if the mainboard already supports eight heads.
  • Four new heads are usually the largest cost in an upgrade.
  • Compare the full upgrade cost with a new 8H machine or a second machine before deciding.
  • Plan spares, calibration and operator training for the new configuration.

Thinking about increasing your flex machine’s capacity? Talk to Unified Engineering Dynamics about upgrade feasibility, 8-head machines and spare planning for your production needs.

More in the flex carriage board series

Related reading on our site: Konica KM512i printhead price and lifespan, KM512i vs KM1024i printheads, flex printer mainboard and head board buyer checks, data and printhead cable handling and the flex printing machine maintenance checklist.

Running an Epson-head eco-solvent machine as well? Our sister series starts with the eco-solvent head carriage board guide and the complete guide to eco-solvent printer electronics.

Frequently Asked Questions

Can I add four heads to my 4-head flex machine?

Only if your mainboard, firmware and software support eight heads and the carriage can hold eight heads mechanically. Otherwise you need a board kit change or a new machine.

Does an 8-head machine print twice as fast as a 4-head machine?

In comparable modes it is often around 1.6 to 2 times faster, depending on settings, media, drying and the board system. Real output also depends on finishing and loading time.

Can I mix old and new Konica heads after an upgrade?

It is possible, but heads with very different wear levels can show density differences. Careful voltage and calibration help. Many technicians recommend matching heads by condition.

Will an 8H carriage board work with my 4H mainboard?

Usually not. The mainboard must support eight heads. Check the mainboard version and software with your supplier first.

What is the biggest cost in a 4 to 8 head upgrade?

Usually the four additional printheads. Add the 8H board, mechanical parts, ink system parts, labour and downtime to get the true cost.

Can an 8-head machine run on four heads if some heads fail?

On some systems, yes, by changing software settings to use one head group temporarily. Confirm with your supplier whether your system supports this.

How long does an 8-head upgrade take?

When all parts are ready and compatible, a technician may complete it in one to three days including calibration. Missing parts or compatibility issues can extend this considerably.

Does an 8-head carriage board need a bigger power supply?

Often yes, because it drives and heats more heads. A technician should check the carriage power supply capacity and margin before the upgrade.

author-avatar

About Avinash Sharma

Avinash Sharma is the founder of Unified Engineering Dynamics (UED), an industrial digital printing machine supplier and engineering consultancy based in Uttar Pradesh, India. He works hands-on with flex printers, eco-solvent printers, UV flatbed and hybrid printers, DTF and sublimation machines, CO2 lasers and CNC routers - from installation and operator training to cost-per-print economics for new printing plants. His guides help first-time buyers across India choose the right machine for their budget, products and city, with honest setup costs and maintenance realities.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *