Direct answer: In the BYHX vs Hoson UV flatbed comparison, Hoson is the usual choice for Epson-head machines (i3200-U1, XP600, TX800) from A3 desktop units to 2513 flatbeds, offering low board prices, wide availability in India and simple Ultraprint or Maintop software. BYHX dominates industrial flatbeds with Ricoh Gen5, Gen5i, Gen6 and Konica 1024i heads, offering robust network architecture, mature print management software and support for higher head counts, at higher board prices. Choose by head type first, then by the support network near you; switching from one system to the other means replacing the full board set, software and often the licence.
The BYHX vs Hoson UV flatbed choice shapes your heads, software, spare costs and support for the whole life of the machine.

Table of Contents
Owners often ask which board system is “better”. The honest answer is that each fits a different class of machine. This guide compares architecture, head support, software, prices, availability, repair and upgrade paths so you can make the right decision when buying, repairing or converting a flatbed. For Senyang, which competes with Hoson on smaller machines, see our Hoson vs Senyang vs BYHX board guide.
BYHX vs Hoson UV flatbed overview
| Factor | Hoson | BYHX |
|---|---|---|
| Typical heads | Epson i3200-U1, XP600, TX800, some Ricoh | Ricoh Gen5, Gen5i, Gen6, Konica 512i and 1024i, Kyocera |
| Typical machines | A3, A2, 6090, 1610, 2513 Epson-head flatbeds | 2513, 3020 and larger industrial flatbeds |
| Head count | 1–8 heads common | 4–16 heads common |
| Connection to PC | USB or gigabit network versions | Mostly gigabit network |
| Software | Hoson print control with Ultraprint, Maintop or PhotoPrint RIP | BYHX print manager with PhotoPrint, Onyx or Ultraprint RIP |
| Board prices (listed, China) | Main boards about $304–600; 2-head sets about $610–680; 4-head kits about $1,055–1,150 | Main boards about $410–866; Ricoh Gen5 4-head kits about $1,360–1,770 |
| Availability in India | Very wide, many dealers stock boards | Good in major print hubs, fewer stockists |
| Repair skills locally | Common | Available, more specialised |
Architecture differences
Hoson
A Hoson system on a UV flatbed typically includes a main board in the cabinet, a carriage or head board on the carriage, and adapter boards for each head. Smaller machines may combine some functions. Network versions use an Ethernet link from the PC to the main board, and a data cable or fibre to the carriage. Flatbed versions add Z-axis, height sensor, vacuum and anti-collision support.
BYHX
BYHX systems tend to split functions further: a main board, a motion board in some configurations, head boards on the carriage and head adapter boards. Their architecture was designed for industrial Ricoh and Konica heads with higher data rates, more channels and longer machines. Network communication and robust shielding are standard.
Head support and image quality
Image quality depends far more on heads, ink, waveform tuning and RIP profiles than on the board brand. Both systems drive their supported heads well when correctly configured. The practical difference is which heads each system supports in your chosen configuration. If your flatbed uses i3200-U1 heads, Hoson is the most common and best-supported choice. If it uses Ricoh Gen5 or Gen6, BYHX is the natural fit, though Hoson also offers Ricoh solutions.
Waveform support matters for white and varnish. BYHX systems on Ricoh machines offer mature waveform options for white ink and varnish; Hoson systems on i3200 machines offer good white and varnish support with correct settings. Either way, get waveforms from the board or machine supplier and do not experiment blindly.
Software and workflow
| Aspect | Hoson | BYHX |
|---|---|---|
| Print control | Hoson printing software, simple layout | BYHX print manager, more advanced options |
| RIP options | Ultraprint and Maintop (about ₹15,000 each in India), PhotoPrint (about ₹40,000) | PhotoPrint, Onyx (about ₹45,000), Ultraprint |
| Licensing | Dongle or board-linked licence | Board-linked licence, often with encryption keys |
| Learning curve | Gentle | Moderate |
| Multi-layer white/colour/varnish | Supported | Supported, very flexible |
Operators trained on one system can learn the other, but expect a week or two of slower work and some profile rebuilding if you switch.
Cost of ownership
Board prices are only part of the story. Consider spare board stock, repair costs, downtime and software. Hoson boards are cheaper and widely stocked, so a spare main board or head board is an affordable insurance policy. BYHX boards cost more, but industrial Ricoh machines earn more per hour, and the boards are robust when protected properly. In both cases, a burnt board after a surge costs far more in downtime than in parts, so power protection matters equally.
| Cost item | Hoson (i3200 flatbed) | BYHX (Ricoh 2513) |
|---|---|---|
| Main board | About $304–600 listed | About $410–866 listed |
| Head or carriage board | About $388–620 listed | About $287–652 listed |
| Heads (India) | i3200-U1 about ₹78,000–95,000 | Ricoh Gen5 about ₹1.25–1.55 lakh; Gen6 about ₹1.7 lakh |
| Typical spare stock | Head board, data cable, supply | Head board, data cable, supply, adapter boards |
Add shipping, customs duty and GST to Chinese listing prices, or buy from an Indian dealer who includes them. See our UV flatbed main board price guide.
Availability and support in India
Hoson boards are stocked by many dealers in Delhi, Mumbai, Ahmedabad, Surat, Chennai and other print centres. Technicians familiar with them are easy to find. BYHX boards are available through machine importers and specialist dealers, especially in Delhi NCR and Mumbai, and BYHX-trained technicians usually support industrial machines. Before buying a machine, ask the seller who will support the board system and how fast spare boards arrive.
Repair considerations
Both systems use dense multi-layer boards with FPGAs and processors. Common repairs, such as burnt connectors, regulators and fuses, are possible on both. Damage to core processors or programmed chips is harder and may require the maker. BYHX boards are sometimes returned to authorised centres for repair; Hoson boards are more often repaired locally or simply replaced because of lower prices. Read our board repair vs replacement guide before deciding.
Switching between BYHX and Hoson
Switching systems is a major job. It usually means replacing the main board, carriage or head boards, adapter boards, data cables and sometimes motor driver connections, then installing new software, a new licence and new profiles. It may also involve changing heads. Common reasons to switch include:
- Converting an XP600 flatbed to i3200-U1 heads with a newer Hoson kit.
- Upgrading an older or unsupported board system on a used machine.
- Moving to Ricoh heads for higher speed and durability on a larger flatbed.
- Standardising board systems across several machines for easier spares and training.
Plan carefully, and read our UV flatbed head upgrade guide and board compatibility guide.
Which to choose: decision guide
| Your situation | Usual choice |
|---|---|
| A3 or A2 flatbed with XP600 or i3200 heads | Hoson (or Senyang) |
| 6090 or 1610 flatbed with i3200 heads | Hoson |
| 2513 flatbed with 2–4 i3200 heads, budget focus | Hoson |
| 2513 or 3020 flatbed with Ricoh Gen5 or Gen6 | BYHX |
| Konica 1024i industrial flatbed | BYHX |
| Multiple machines already on one system | Stay with that system |
Questions to ask before buying a machine
- Which board system, version and firmware does the machine use?
- Is the licence permanent and transferable?
- Who stocks spare boards locally, and at what price?
- Which RIP software is included?
- Can technicians support the system in my city?
- Is there a clear upgrade path for heads and boards?
BYHX vs Hoson UV flatbed: common myths
- “BYHX always prints better.” Quality depends mainly on heads, ink, profiles and maintenance.
- “Hoson is only for cheap machines.” Many productive 2513 i3200 flatbeds run Hoson systems reliably.
- “You can mix boards.” You cannot mix Hoson and BYHX boards in one machine.
- “Expensive boards never fail.” Any board fails with surges, heat, ink or wiring mistakes.
Network architecture in practice
Both systems now offer gigabit network connections between PC and main board. On Hoson flatbeds, network versions replaced USB on most mid-size and larger machines because they tolerate longer cables and electrical noise better. On BYHX systems, network links are standard and often extend to the carriage, sometimes with fibre, which suits long gantries on 3020 machines. For owners, the practical lesson is the same: use a dedicated network card with a fixed IP and good Cat6 cable, whichever system you run. Our connection problems guide explains setup.
White ink and varnish handling
White and varnish are where flatbeds earn premium prices, on acrylic signs, glass, wood and packaging. Both systems support multi-layer printing such as white underbase, colour and spot varnish in one or several passes. BYHX print managers on Ricoh machines offer very flexible layer control and waveform options for high-viscosity white. Hoson software on i3200 machines offers simpler but effective layer settings. In both cases, white circulation hardware, ink quality and maintenance matter more than the board brand. See our white ink circulation guide.
Head count and future growth
If you expect to grow from two heads to four or more, check the maximum head count of your board version. Hoson offers i3200 boards from one to eight heads, with 6–8 head main boards listed around $588–598. BYHX supports larger Ricoh and Konica arrays common on industrial machines. Choosing a board with spare capacity avoids replacing the full set when you add heads.
Firmware and update policy
Both makers release firmware updates for new heads and features. Hoson updates often arrive through dealers with new software packages. BYHX updates are usually managed through machine makers or authorised partners. Whichever you choose, keep firmware matched across boards and software and update only with a clear reason. Our firmware update guide covers safe procedures.
Comparing BYHX vs Hoson UV flatbed spare stock
A sensible spare stock for a Hoson i3200 flatbed is one head board, one set of head data cables and one 24 V supply. For a BYHX Ricoh flatbed, add head adapter boards and a carriage data cable. Spare main boards are worth considering for single-machine shops. See our electronics spares stock list.
Training and operator familiarity
Operator skill has a large effect on output. If your team already knows Hoson software from eco-solvent or DTF machines, a Hoson flatbed lets them become productive quickly. If you are hiring operators experienced on industrial Ricoh machines, they may already know BYHX print managers. Factor existing skills into the BYHX vs Hoson UV flatbed decision, especially for small teams where retraining time means lost production.
Resale value
When selling a flatbed later, buyers look for board systems they can support locally. Hoson machines appeal to a wide pool of buyers because spares and technicians are common. BYHX Ricoh machines appeal to established industrial users who value durability. In both cases, a clear licence, matched firmware and service records raise resale value.
Summary for busy owners
Match the board system to your heads, check local support, and protect whichever system you choose with good power and maintenance. That simple approach avoids most regrets in the BYHX vs Hoson UV flatbed decision.
Bottom line
The BYHX vs Hoson UV flatbed decision is really a head and machine-class decision. Hoson fits Epson-head flatbeds from desktop to 2513 with low costs and easy support. BYHX fits industrial Ricoh and Konica flatbeds with robust architecture and advanced software. Choose the system that matches your heads and local support, protect it with good power and maintenance, and avoid switching unless there is a clear business reason.
Further reading: Both systems rely on FPGA chips to handle high-speed head data and timing.
Key takeaways
- Hoson suits i3200-U1, XP600 and TX800 flatbeds; BYHX suits Ricoh and Konica industrial flatbeds.
- Image quality depends more on heads, ink and profiles than board brand.
- Hoson boards are cheaper and more widely stocked in India.
- BYHX offers advanced print management and higher head counts.
- Switching systems means replacing boards, software, licence and profiles.
- Check local support and spare availability before buying.
More in the UV flatbed main board series
- UV Flatbed Main Board Functions and Ports
- UV Flatbed Main Board Failure Symptoms
- UV Flatbed Firmware Update Guide
- UV Flatbed Head Upgrade: XP600, i3200, Ricoh
- UV Flatbed Connection Problems
- UV Flatbed Main Board Replacement
- UV Flatbed Surge and Lightning Protection
- UV Flatbed Main Board Price in India
- Used UV Flatbed Electronics Check
Related reading on our site: UV flatbed printer spare parts buyer’s guide, UV flatbed boards, cables, motors and interlock spares, UV flatbed printer problems and fixes, Epson i3200 vs XP600 printheads and UV flatbed printer price in India.
Running a UV roll to roll machine as well? The matching guide in our roll to roll series is BYHX vs Hoson vs Senyang Main Boards for UV.
Frequently Asked Questions
Which is better, BYHX or Hoson for a UV flatbed?
Neither is universally better. Hoson suits Epson-head flatbeds; BYHX suits industrial Ricoh and Konica flatbeds.
Does Hoson support Ricoh heads?
Yes, Hoson offers Ricoh solutions, but BYHX is more common on Ricoh industrial flatbeds.
Can I mix Hoson and BYHX boards?
No. All boards in a machine must be from the same system and compatible versions.
Which is cheaper?
Hoson boards are generally cheaper, with main boards listed around $304–600 versus BYHX at about $410–866.
Which RIP software works with each?
Hoson commonly uses Ultraprint, Maintop or PhotoPrint; BYHX commonly uses PhotoPrint, Onyx or Ultraprint.
Is BYHX harder to learn?
It has more options and a moderate learning curve; operators adapt within a week or two.
Which has better support in India?
Hoson has wider dealer and technician coverage; BYHX support is strong in major hubs.
Can I convert from BYHX to Hoson?
Yes, by replacing the full board set, cables, software and licence, and rebuilding profiles.
Do boards affect print quality?
Indirectly through waveforms and timing; heads, ink, profiles and maintenance matter more.
Are BYHX boards more reliable?
They are robust, but reliability depends heavily on power, cooling and handling for both systems.
Which system suits a 2513 i3200 flatbed?
Hoson is most common on 2513 machines with i3200-U1 heads.
Which system suits a Ricoh Gen6 flatbed?
BYHX is most common, with mature Gen6 support and network architecture.
Can boards be repaired?
Both can be repaired for limited damage. Core processor damage usually needs the maker or replacement.
Does switching require new heads?
Not always, but conversions often coincide with head upgrades.
What should I ask before buying a used flatbed?
Board system, version, licence status, local spare availability and support.
Are licences transferable between systems?
No. A new system needs its own licence.
Do both systems support network connection?
Yes. Hoson offers USB and network versions; BYHX systems are mostly network-based.
Which system handles white ink better?
Both handle white well when correctly set up. Circulation hardware, ink and maintenance matter more than board brand.