Direct answer: UV flatbed printer electronics consist of five connected systems: the main board, which talks to the RIP PC and controls motion, sensors, lamps and vacuum; the carriage and head driver boards, which turn data into firing pulses for Epson i3200-U1, XP600, Ricoh Gen5/Gen6 or Konica heads; the heads themselves; the UV LED curing system with its drivers, fans or chiller; and the power system of supplies, stabiliser, UPS, surge protection and earth. Most failures start with power, heat, ink, static or careless cable handling, and most expensive damage happens when a failed head or board is replaced without finding the root cause. This guide maps every part and links to 34 detailed articles.
This guide to UV flatbed printer electronics maps every board, head, lamp and power part, and shows how they work together.

Table of Contents
This is the hub of our UV flatbed electronics series, written for owners, operators and technicians running A3 desktop machines, A2 and 6090 flatbeds, and 2513 or 3020 industrial machines in India. It explains how the electronics fit together, what typically fails and why, what parts cost in 2026, and where to find detailed guidance on each topic. If you run other machine types, see our companion guides on UV roll to roll printer electronics, eco-solvent printer electronics and flex printer electronics.
How UV flatbed printer electronics fit together
| System | Main parts | What it does |
|---|---|---|
| Control | RIP PC, print control software, main board | Turns designs into print data, controls the machine |
| Motion and sensing | Motor drivers, motors, encoder, limit, height, collision and vacuum sensors | Moves gantry, table and carriage safely and accurately |
| Head electronics | Carriage board, head driver boards, adapter boards, head cables | Delivers data and firing pulses to each head |
| Heads | i3200-U1, XP600, TX800, Ricoh Gen5/Gen5i/Gen6, Konica 1024i, Kyocera | Jet ink drops |
| Curing | UV LED lamps, lamp drivers, fans, chiller | Cures ink instantly |
| Ink electronics | Pumps, level sensors, white circulation, heaters | Keeps ink supplied and conditioned |
| Power | SMPS units, stabiliser, UPS, SPD, earth | Supplies clean, stable power |
Data flows from the RIP PC to the main board, then down the data cable to the carriage, where head boards generate firing pulses timed by the encoder. Meanwhile, the main board moves the axes, reads sensors and switches lamps and vacuum. Power systems feed everything.
Section A: carriage and head boards
The carriage board and head boards ride on the carriage above the table, close to the heads and lamps. They face heat, UV reflection, ink mist and cable flexing every day. Our carriage board series covers:
- UV flatbed carriage board explained: what it does for i3200 and Ricoh heads.
- Head board failure symptoms: signs and tests.
- Hoson vs Senyang vs BYHX boards: choosing a system.
- Adding white and varnish heads: board upgrades.
- Head crashes and UV reflection: how boards get damaged.
- Head cable vs carriage board fault: isolating the cause.
- Carriage board replacement checklist.
- Burnt head board after an i3200 head change.
- Carriage board price in India.
- Board connectors and static.
Section B: head driver boards and power
Driver circuits generate the high-current firing pulses that make heads jet. A damaged channel can destroy a new head in seconds, so understanding drivers and power protection is essential:
- Head driver board explained.
- Driver board vs main board vs head board.
- Driver board failure signs.
- Why new heads fail fast.
- i3200-U1 head voltage.
- Board compatibility.
- Board repair vs replacement.
- Stabilizer, UPS and earthing.
- Lamp cooling and board overheating.
Section C: the main board
The main board is the traffic controller of the machine. Our main board series covers:
- Main board functions and ports.
- Main board failure symptoms.
- BYHX vs Hoson main boards.
- Firmware update guide.
- Head upgrade: XP600, i3200, Ricoh.
- USB and network connection problems.
- Main board replacement, dongle and licence.
- Surge and lightning protection.
- Main board price in India.
- Used UV flatbed electronics check.
Heads used on UV flatbeds
| Head | Typical machines | Indicative price (India) | Notes |
|---|---|---|---|
| Epson XP600 | A3, A2, 6090 entry machines | About ₹12,000–15,000 | Low cost, shorter life with UV ink |
| Epson TX800 | A3, A2 | About ₹38,000 at some stockists | Older alternative to XP600 |
| Epson i3200-U1 | A3 to 2513 | About ₹78,000–95,000 | Industrial Epson head, popular upgrade |
| Ricoh Gen5 / Gen5i | 2513, 3020 | About ₹1.25–1.55 lakh | Industrial durability, larger throw distance |
| Ricoh Gen6 | 2513, 3020 | About ₹1.7 lakh | Higher speed and resolution |
| Konica 1024i, Kyocera | Industrial flatbeds | Varies by model | High-speed production |
Compare heads in our XP600 vs i3200 vs Ricoh guide and Konica vs Ricoh vs Epson comparison.
Board systems and prices at a glance
| Board | Indicative listed price (Nov 2026) |
|---|---|
| Senyang i3200 single-head main board | About $179–209 |
| Hoson i3200 main board | About $304–600 |
| Hoson i3200 head board | About $388–450; original 4-head about $570–620 |
| Hoson i3200 2-head network set | About $610–680 |
| Hoson i3200 4-head flatbed kit | About $1,055–1,150 |
| BYHX main boards | About $410–866 |
| Ricoh Gen5 carriage boards | About $287–652 |
Add shipping, customs duty and GST to import prices. Indian dealers usually quote inclusive prices with faster delivery and support.
Curing electronics
UV LED lamps, typically 395 nm on flatbeds, cure ink as the carriage passes. Lamp drivers control current and intensity, and fans or water cooling with a chiller remove heat. Weak cooling shortens lamp life and heats nearby head boards. 395 nm lamps cost about ₹12,000–15,000 and CW-5200 chillers about ₹22,000–32,000 in India. See our LED lamp replacement guide and curing problems guide.
Power and protection
Indian supply conditions make power protection essential. A typical setup includes a servo stabiliser (5 kVA about ₹12,000–25,000), an online UPS for electronics and PC (3 kVA about ₹32,000–43,000), a Type 2 surge protection device (about ₹500–6,000), and a dedicated low-resistance earth. Internal SMPS units supply 24 V and other rails; a Meanwell 24 V unit costs about ₹1,000–3,500. Most board failures in Indian workshops trace back to power, so this is where prevention starts.
Why UV flatbed printer electronics fail
| Root cause | Typical damage | Prevention |
|---|---|---|
| Surges and poor earth | Main boards, supplies, PC ports | SPD, stabiliser, UPS, dedicated earth |
| Heat | Head boards, drivers, lamps | Fans, chiller, clean filters, room ventilation |
| Ink leaks and mist | Connectors, boards, corrosion | Fix leaks, clean carriage, protect boards |
| Static from plastics | Inputs, communication faults | Earthing, ionisers, slow film peeling |
| Hot-plugging and angled cables | Head boards, heads | Power off, straight insertion |
| Head crashes | Heads, cables, boards | Height sensor, collision sensors, media checks |
| Wrong voltage or settings | Heads | Record and verify voltages |
| Mismatched parts | Boards, heads | Version checks before buying |
The golden rules
- Power off before connecting or disconnecting anything.
- Never fit a new head until you know why the old one failed.
- Test driver channels before connecting expensive heads.
- Use stable, protected power with a good earth.
- Keep the carriage cool, clean and free of ink mist.
- Record board versions, firmware, voltages and licence details.
- Match versions before buying replacement boards.
- Follow a preventive maintenance routine.
Section D: practical guides
The remaining guides in this series turn knowledge into action:
- Fault finding: a step-by-step method.
- Compatibility table: heads, boards and lamps.
- Electronics spares stock list.
- Warranty claim guide.
- Preventive maintenance checklist.
UV flatbed printer electronics by machine class
| Machine | Typical electronics | Common weak points |
|---|---|---|
| A3 desktop | Combined main and head board, 1–2 XP600 or i3200 heads, air-cooled lamp, internal SMPS | Heat near boards, USB link, small supplies |
| A2 and 6090 | Hoson or Senyang main and head boards, 2–3 heads, air or water-cooled lamps | Cable chain wear, USB noise, lamp cooling |
| 1610 and 2513 Epson | Hoson network boards, 2–8 i3200-U1 heads, water-cooled lamps, chiller | Long data links, vacuum zones, power capacity |
| 2513 and 3020 Ricoh | BYHX board sets, Ricoh Gen5/Gen6 heads, high-power lamps, chillers, sometimes three-phase | Surge exposure, neutral faults, heat load |
Knowing your machine class helps you focus maintenance and spares on the parts most likely to fail.
The data path in detail
When you press print, the RIP software separates the design into colour, white and varnish channels, applies colour profiles and screening, and passes the data to the print control software. The control software sends it to the main board over USB or Ethernet. The main board buffers the data and, as the carriage moves, reads the encoder to know exactly where each nozzle is. It passes the right data at the right moment to the carriage board, which distributes it to the head boards. The head driver circuits shape and amplify firing pulses according to head voltage and waveform settings, and each piezo element flexes to fire a drop. The lamps cure the ink almost immediately. Any break in this chain, from a damaged cable to a dirty encoder strip, shows up in the print.
The power path in detail
Mains power enters through the distribution board, ideally protected by a surge protection device, then passes through a servo stabiliser. Sensitive electronics and the PC run from an online UPS, while heavy loads such as vacuum pumps and chillers often run directly from the stabiliser. Inside the machine, SMPS units convert AC to 24 V and other DC rails for boards, motors and sensors, and separate supplies feed the lamps. A good earth connects the machine frame, cabinet, SPD and PC. Weakness anywhere in this path shows up as resets, communication errors or failed parts.
Where to start as a new owner
- Record your machine’s board system, versions, firmware, heads, lamps and licence.
- Install proper power protection before production.
- Train operators in safe cable handling and daily checks.
- Set up the preventive maintenance checklist and log.
- Build a small spares stock of cables, fuses, a supply and dampers.
- Find a reliable local technician and supplier.
These six steps prevent most early-life problems and make later faults easier to solve.
Getting help
When a problem goes beyond your team’s skills, contact your machine dealer, board supplier or an experienced independent technician. Provide machine details, board versions, symptoms, photos and your maintenance log. Clear information gets faster, cheaper help. Unified Engineering Dynamics supplies printer parts and guidance for Indian print shops and can help identify compatible boards, heads and lamps for your machine.
How to use this series
Read this guide first for the overview, then go to the section that matches your question: carriage and head boards, driver boards and power, the main board, or the practical guides. Bookmark the fault finding and preventive maintenance guides for daily use, and share them with operators.
A note on prices
All prices in this series are indicative listings gathered in November 2026 from Indian dealers, IndiaMART and Chinese suppliers. They change with exchange rates, versions and supply. Always get current written quotes with versions and warranty terms before buying.
Bottom line
UV flatbed printer electronics are a connected system of control, motion, head, curing, ink and power electronics. Understanding how they fit together lets you diagnose faults quickly, buy the right parts and, above all, prevent the expensive chain failures that destroy boards and heads. Start with power protection and safe handling, keep records, and use the detailed guides in this series whenever a specific question arises.
Further reading: All of these systems exist to jet and then instantly harden ink through ultraviolet curing.
Key takeaways
- Electronics include main board, carriage and driver boards, heads, curing, ink electronics and power.
- Data flows from RIP to main board to carriage boards to heads, timed by the encoder.
- Heads range from XP600 at about ₹12,000 to Ricoh Gen6 at about ₹1.7 lakh.
- Power, heat, ink, static and handling cause most failures.
- Find the root cause before replacing any head or board.
- Protect power, keep records and follow preventive maintenance.
More in the UV flatbed electronics guides
- UV Flatbed Fault Finding
- UV Flatbed Compatibility Table
- UV Flatbed Electronics Spares Stock
- UV Flatbed Warranty Claim Guide
- UV Flatbed Preventive Maintenance
Related reading on our site: UV flatbed printer spare parts buyer’s guide, UV flatbed boards, cables, motors and interlock spares, UV flatbed printer problems and fixes, Epson i3200 vs XP600 printheads and UV flatbed printer price in India.
Running a UV roll to roll machine as well? The matching guide in our roll to roll series is UV Roll to Roll Printer Electronics: Complete Guide.
Frequently Asked Questions
What are UV flatbed printer electronics?
The main board, carriage and head driver boards, heads, UV LED curing system, ink electronics and power system that run the machine.
Which board controls the machine?
The main board, which communicates with the PC and controls motion, sensors, lamps and vacuum.
Which board fires the heads?
The carriage or head driver boards, using data and timing from the main board.
What heads do UV flatbeds use?
Commonly Epson XP600, TX800 and i3200-U1, and Ricoh Gen5, Gen5i and Gen6 on industrial machines, plus Konica and Kyocera.
Why do UV flatbed boards fail?
Mostly surges, poor earth, heat, ink leaks, static, hot-plugging, head crashes and mismatched parts.
What is the most important protection?
Stable power with a stabiliser, online UPS, surge protection device and good earth.
How much does a Hoson i3200 main board cost?
About $304–600 listed, plus shipping, duty and GST if imported.
How much does an i3200-U1 head cost in India?
About ₹78,000–95,000.
Can I replace a head without checking the board?
No. A damaged driver channel can destroy a new head quickly.
What lamp do UV flatbeds use?
Usually 395 nm UV LED lamps, air or water cooled.
Do I need a chiller?
Water-cooled lamps on larger machines need one; small machines often use air-cooled lamps.
Which board system is most common?
Hoson on Epson-head machines and BYHX on industrial Ricoh and Konica machines.
How do I find a fault?
Use a structured method: observe, check power, cables and settings, isolate by swapping, then confirm.
What spares should I keep?
Typically a head board, head cables, a power supply, fuses and dampers; see our spares guide.
How often should electronics be maintained?
Daily, weekly, monthly and seasonal checks as in our preventive maintenance checklist.
Is this guide relevant to roll to roll UV printers?
Many principles overlap, but see our UV roll to roll electronics guide for machine-specific details.
How does data travel through a UV flatbed?
From the RIP to the print control software, then the main board, carriage board and head boards, timed by the encoder, to fire each nozzle.
What should a new UV flatbed owner do first?
Record the electronics, install power protection, train operators, start maintenance, build basic spares and find reliable support.