Direct answer: Choosing Hoson vs Senyang for a UV flatbed, or BYHX on larger machines, decides which heads you can run, which software you use and where you buy spares. Hoson is the most common board system on A3, A2 and 6090 UV flatbeds with Epson XP600, TX800 and i3200-U1 heads, and also offers Ricoh kits. Senyang is a widely used alternative for Epson heads, popular on budget and mid-range flatbeds. BYHX dominates industrial 2513 and 3020 flatbeds with Ricoh Gen5, Gen6 and Konica heads. The three systems do not mix: main board, carriage board and software must all come from the same system and compatible versions. For most owners the best system is simply the one already in the machine, supported by local spares and technicians.
Choosing between Hoson vs Senyang UV flatbed boards, or BYHX on bigger machines, decides which heads you can run and how easily you get spares and support.

Table of Contents
Owners often ask which board system is “best”. The honest answer depends on the machine size, the heads, the software you know and the support available in your city. This guide compares the three systems as they are used on UV flatbeds in India. It builds on our explanation of the UV flatbed carriage board.
Hoson vs Senyang UV flatbed boards and BYHX: quick comparison
| Feature | Hoson | Senyang | BYHX |
|---|---|---|---|
| Typical flatbeds | A3, A2, 6090, some 2513 | A3, A2, 6090 | 2513, 3020, industrial |
| Common heads | XP600, TX800, i3200-U1, Ricoh Gen5/Gen6 | XP600, TX800, i3200-U1 | Ricoh Gen5/Gen5i/Gen6, Konica 1024i, Kyocera |
| Head counts | 1–4 Epson, 4–8 Ricoh | 1–4 Epson | 4–16 depending on model |
| Flatbed support | XYZ-axis kits, height sensor, vacuum control on many kits | Flatbed kits available | Industrial flatbed control |
| Data link | USB or network versions | USB or network | Network, fibre on large machines |
| Spares in India | Widely available | Widely available | Available for common Ricoh kits |
| Example listed prices | i3200 UV flatbed double-head kit about $600–1,120 | Bundled in conversion kits about $680–720 | Ricoh Gen5 4-head main board about $845–866 |
Hoson on UV flatbeds
Hoson boards are found on a large share of small and mid-size UV flatbeds sold in India. Their flatbed kits commonly support X, Y and Z axes, so the same board set can drive the table or gantry, the carriage and the height motor. Network-port versions are increasingly common. Hoson kits exist for one, two, three and four i3200 heads, for XP600 and TX800, and for Ricoh heads on larger machines.
Strengths: wide availability, many technicians familiar with the software, kits for most Epson heads, flatbed-specific features.
Points to watch: many versions and revisions exist; a board from the same brand but a different version may not work with your main board or software. Always match versions.
Listings in late 2026 included a Letop Hoson i3200 double-head UV flatbed kit with XYZ support at about $898, an i3200-U1 double-head full kit at about $1,120, a Hoson i3200 double carriage board at about $430 and a Hoson A3 flatbed main board for i3200, XP600 and TX800 at about $304.
Senyang on UV flatbeds
Senyang boards are a popular alternative for Epson heads, especially on budget and mid-range flatbeds and in XP600 to i3200 conversion kits. Their software is different from Hoson’s, so operators trained on one system need time to adjust to the other.
Strengths: competitive prices, good availability, wide use in conversion kits.
Points to watch: as with Hoson, versions matter, and flatbed-specific functions vary between kits. Check that the kit supports your Z-axis, height sensor and vacuum control.
BYHX on UV flatbeds
BYHX is the leading system on industrial UV flatbeds with Ricoh, Konica and Kyocera heads. It handles high head counts, white and varnish channels and the higher data rates of large machines, often over network or fibre links.
Strengths: proven on industrial machines, strong support for Ricoh Gen5 and Gen6, mature software for white and varnish layers.
Points to watch: boards are more expensive, and some machine makers customise BYHX firmware, so spares may need to come from the machine supplier. Indicative listings showed BYHX Gen5 four-head main boards around $845–866.
Why the systems do not mix
- Different communication protocols between main and carriage boards.
- Different firmware and print control software.
- Different connectors and cable pinouts.
- Different head driver designs and waveform files.
- Software licences tied to a specific system or board.
Changing from one system to another is effectively a full electronics conversion: main board, carriage board, cables, software and often head adapters. See our guide to UV flatbed board compatibility.
How to identify the system in your machine
- Open the electronics cabinet with power off and photograph the main board.
- Look for brand names, logos and part numbers printed on the board.
- Remove the carriage cover and photograph the carriage board.
- Note version stickers and the number of head connectors.
- Check the print control software’s name and “About” screen.
- Note the RIP and its printer driver name.
Choosing a system for a new or converted machine
| If you… | Consider |
|---|---|
| Run an A3 or A2 flatbed with Epson heads | Hoson or Senyang, whichever your technicians know |
| Want i3200-U1 heads with white and varnish | A Hoson or Senyang 3–4 head i3200 kit with flatbed support |
| Run a 2513 with Ricoh Gen5 or Gen6 | BYHX or Hoson Ricoh kits, matching the existing system |
| Need many heads and high speed | BYHX industrial systems |
| Already have a working system | Stay with it; spares and skills matter most |
Software differences
Each system has its own print control software for head settings, voltages, temperatures, calibration, white and varnish layers and flatbed functions such as height and vacuum. Operators need time to learn a new system. RIPs such as Maintop, PhotoPrint and others must support the chosen board system and printer model. Before converting, confirm your RIP supports the new system.
Support and spares in India
Hoson and Senyang spares are widely stocked by traders in Delhi, Mumbai and other cities because of the large number of Epson-head machines. BYHX Ricoh spares are available for common configurations, but customised machines may need parts from the original supplier. Ask your supplier which boards they stock for your system and version.
Common mistakes
- Buying a board by head type only, without matching system and version.
- Assuming all Hoson boards work together.
- Converting systems without checking software licences and RIP support.
- Ignoring flatbed functions such as Z-axis and height sensor when buying a conversion kit.
Example: XP600 to i3200 conversion
A Kanpur gift shop converted an A3 flatbed from two XP600 heads to two i3200-U1 heads with a Hoson kit. The kit supported XYZ axes and the height sensor, but the RIP needed an update to recognise the new configuration. After the update and new profiles, print speed and quality improved noticeably. See our UV flatbed head upgrade guide.
Example: wrong version
A unit bought a Hoson i3200 carriage board online to replace a burnt one. It was a newer version, and the main board did not recognise it. The supplier provided a firmware update for the main board, and the machine worked again, but only after two days of downtime. Matching versions at the time of purchase would have avoided the delay.
Head support by board system
The table below shows which heads each system commonly supports on UV flatbeds. Availability varies by version, so always confirm with your supplier.
| Head | Hoson | Senyang | BYHX |
|---|---|---|---|
| Epson XP600 | Yes, 1–4 heads | Yes, 1–4 heads | Limited |
| Epson TX800 | Yes | Yes | Limited |
| Epson i3200-U1 | Yes, 1–4 heads | Yes, 1–4 heads | Some kits |
| Ricoh Gen5 / Gen5i | Yes, 2–8 heads | Rare | Yes, 4–16 heads |
| Ricoh Gen6 | Yes, newer kits | Rare | Yes |
| Konica 1024i | Some kits | Rare | Yes |
| Kyocera | Rare | Rare | Yes, industrial |
Ricoh head choices are compared in our guide to XP600 vs i3200 vs Ricoh heads.
Flatbed functions to compare
A roll to roll board set only needs to control the media feed. A flatbed board set must handle more. When comparing Hoson vs Senyang kits for a UV flatbed, or a BYHX system for an industrial machine, check each of the following:
| Function | Why it matters |
|---|---|
| Z-axis motor control | Raises and lowers the carriage for different substrate thicknesses |
| Automatic height measurement | Sets head gap automatically, reduces crashes |
| Anti-collision input | Stops motion when the carriage touches an obstacle |
| Vacuum zone control | Switches table zones to match sheet size |
| Dual Y-motor sync | Keeps gantry square on large flatbeds |
| Lamp control by direction | Switches leading and trailing lamps for curing and to limit reflection |
| White and varnish layer control | Prints white under, colour, then varnish in the right sequence |
| Rotary attachment support | Prints on bottles, tumblers and cylinders |
Not every kit offers every function. A cheaper kit missing Z-axis control or rotary support may cost more in the long run if you need those features later.
Software experience for operators
Operators spend hours every day in the print control software, so ease of use matters. Hoson software is familiar to many Indian technicians because of its wide use on Epson-head machines. Senyang software is similar in concept but different in layout, and operators switching between them need practice. BYHX software offers more control over head groups, waveforms and layer sequences, which suits industrial users but can feel complex for small shops. Before choosing a system for a new machine, ask for a demonstration and check whether your operators and local technicians are comfortable with it.
Warranty and support patterns
Boards bought directly from Chinese suppliers usually carry short warranties, often around three months, and require shipping the board back for assessment. Boards from Indian dealers may carry similar terms but are easier to return and exchange. Machine makers who supply the whole printer often offer longer support but may insist on their own parts. Whichever route you choose, keep invoices, photos of labels and records of installation, and ask what voids the warranty, such as burnt marks or ink damage.
Mixed fleets
Some shops run several flatbeds bought over the years with different board systems. This increases training needs and spare stock. Where possible, standardise new purchases on one system so spare cables, adapters and even boards can be shared, and operators only need to learn one software. When buying a used flatbed, the board system should be part of the decision. Our used UV flatbed buying guide explains other checks.
Network vs USB boards on UV flatbeds
Both Hoson and Senyang offer USB and network-port versions of their flatbed kits. Network boards connect the printer to the RIP PC through an Ethernet cable, which allows longer cable runs, fewer driver problems and more stable data transfer on fast i3200 machines. USB boards are simpler and sometimes cheaper, but long USB cables, power-saving settings on the PC and electrical noise can cause dropped connections mid-print. For new purchases, a network version is usually the better choice. When replacing a board, stay with the same connection type unless the whole kit is being changed, because the main board and software must match. See our guide to UV flatbed connection problems.
Questions to ask before choosing Hoson vs Senyang for a UV flatbed
- Which system do my current machines and technicians use?
- Does the kit support my heads, head count, white and varnish?
- Does it support Z-axis, height sensor, anti-collision, vacuum zones and rotary?
- Is it USB or network, and does my RIP support it?
- What warranty and local support are available?
- Are spare carriage boards of the same version readily available in India?
Bottom line
Hoson vs Senyang on a UV flatbed, or BYHX on an industrial machine, is less about which brand is “best” and more about matching heads, flatbed functions, software, spares and support. Keep the system you have unless there is a strong reason to change, match versions carefully when buying boards and confirm compatibility in writing.
Further reading: For background on how piezo heads and their control electronics work together, see this overview of inkjet printing.
Key takeaways
- Hoson and Senyang dominate Epson-head UV flatbeds; BYHX dominates industrial Ricoh flatbeds.
- Systems never mix; main board, carriage board and software must match.
- Versions matter even within one brand.
- Check flatbed functions such as Z-axis, height sensor and vacuum in any kit.
- Local spares and technician skills often matter more than brand.
More in the UV flatbed carriage board series
- UV Flatbed Carriage Board Explained
- UV Flatbed Head Board Failure Symptoms
- Adding White and Varnish Heads to a UV Flatbed
- Head Crashes, UV Reflection and Board Damage
- UV Flatbed Head Cable vs Carriage Board Fault
- UV Flatbed Carriage Board Replacement Checklist
- Burnt Head Board After an i3200 Head Change
- UV Flatbed Carriage Board Price in India
- UV Flatbed Board Connectors and Static
Related reading on our site: UV flatbed printer spare parts buyer’s guide, UV flatbed boards, cables, motors and interlock spares, UV flatbed printer problems and fixes, Epson i3200 vs XP600 printheads and UV flatbed printer price in India.
Running a UV roll to roll machine as well? The matching guide in our roll to roll series is Hoson vs Senyang vs BYHX Carriage Boards for Ricoh Gen5/Gen6.
Frequently Asked Questions
Which is better for a UV flatbed, Hoson or Senyang?
Both work well with Epson heads. Choose the one your machine already uses or your technicians know best, with good local spares.
Which board system do industrial UV flatbeds use?
Most 2513 and 3020 flatbeds with Ricoh, Konica or Kyocera heads use BYHX, with some Hoson Ricoh kits.
Can I use a Senyang carriage board with a Hoson main board?
No. Main and carriage boards must come from the same system.
Do all Hoson boards work together?
No. Versions and revisions must be compatible with your main board and software.
How much does a Hoson i3200 flatbed kit cost?
Late 2026 listings showed Hoson i3200 double-head UV flatbed kits about $600–1,120.
Do flatbed kits control the Z-axis?
Many Hoson flatbed kits support XYZ axes and height sensors. Check before buying.
Can I switch from Hoson to BYHX?
Only as a full conversion of boards, cables and software, which is costly and rarely worthwhile on small machines.
How do I identify my board system?
Photograph the main and carriage boards, look for brand names and part numbers, and check the print software.
Does my RIP work with every board system?
Not necessarily. Confirm your RIP supports your printer model and board system.
Are spares easy to find in India?
Hoson and Senyang spares are widely available; BYHX spares for common Ricoh kits are available, but customised machines may need the original supplier.
Is BYHX worth it on a small flatbed?
Rarely. BYHX suits industrial machines with many Ricoh or Konica heads.
Can the same system drive white and varnish heads?
Yes, if the kit supports the head count and the software licence includes white and varnish.
What is the most common mistake when buying boards?
Buying by head type only without matching system and version.
Can Unified Engineering Dynamics supply Hoson, Senyang and BYHX boards?
Yes. Send board photos and machine details and our team will help find the correct boards.
Do all flatbed kits control the Z-axis?
No. Check for Z-axis, height sensor, anti-collision and vacuum control before buying.
Which system supports rotary attachments?
Many Hoson and Senyang flatbed kits support rotary printing. Confirm with your supplier.
Should I standardise on one board system?
Yes, where possible. It simplifies training, spares and support across several machines.
Is a network board better than USB on a flatbed?
Network boards usually give more stable data transfer and longer cable runs, especially on fast i3200 machines.