Flex Printing

Flex Board Warranty Claim Guide: Boards and Konica Heads on Flex Printing Machines

Flex Board Warranty Claim: Boards and Konica Heads

Direct answer: A successful flex board warranty claim depends on evidence. Before claiming, read the warranty terms, stop using the failed part, and collect the invoice and serial number, installation date, photos of the part on arrival and after failure, nozzle checks, error screenshots, the voltage and temperature settings in use, earthing and power protection records and a clear timeline. Suppliers commonly reject claims for burns from hot-plugging, surge damage, solvent ink contamination, physical damage, excessive voltage settings and third-party repairs, so records showing correct practice are essential. Contact the supplier promptly in writing, describe the failure factually, follow their return process and do not attempt repairs first.

A flex board warranty claim succeeds or fails on evidence, so the records you keep before a failure matter as much as the failure itself.

Flex Board Warranty Claim: Boards and Konica Heads
Flex Board Warranty Claim: Boards and Konica Heads

Boards and Konica heads for flex machines are expensive, and many come with warranties of a few months. Yet claims are often rejected because owners cannot show that the part failed under normal use. This guide explains how warranties usually work and how to support a claim. It builds on our flex printer electronics guide.

Typical warranty terms

PartTypical warrantyCommon exclusions
New boardsOften 3โ€“6 months, sometimes longerBurns from hot-plugging, surge, ink damage, physical damage, repairs
Konica headsOften limited to defects on arrival or short periodsClogging, dried ink, impact, wrong ink, electrical damage
Power suppliesVariesSurge, overload, wrong wiring
Repaired boardsRepair shop’s own, often shortFaults unrelated to the repair
New machinesMachine warranty, heads often excluded or limitedNeglect, unauthorised repairs, power damage

For example, a Chinese supplier listed a BYHX KM512 8-head board with a three-month warranty, and an Indian trader offered a BYHX KM512 head and main board set with a six-month warranty. Always get terms in writing at purchase.

Why claims get rejected

  • Electrical burns: suggest hot-plugging, surge or a shorted head.
  • Solvent ink contamination: ink on boards or in connectors.
  • Physical damage: cracked boards, damaged nozzle plates, broken connectors.
  • Wrong settings: head voltages far above the label value.
  • Incompatible ink: ink not approved for the head.
  • Third-party repair: signs of soldering or modification.
  • No proof: missing invoice or installation date.
  • Late claim: outside the warranty period or reporting window.

Evidence to collect for a flex board warranty claim

EvidenceWhy it helps
Invoice and serial numberProves purchase and warranty period
Installation date and installerShows time in use
Photos on arrivalShows condition when received
Photos after failureShows no burns, ink or physical damage
Nozzle checks over timeShows head performance history
Error screenshotsShows the failure mode
Settings recordShows correct voltages and temperatures
Earth test and power protection recordsShows a controlled electrical environment
Ink type and approvalShows compatible ink
TimelineHelps the supplier understand the cause

Board claims

For boards, suppliers check for burns, ink, physical damage and repair marks. Support your claim with photos of the board installed and after removal, records of power-off procedures and anti-static handling, earth test and surge protection records, error logs and confirmation that connected heads were tested if a head was involved. Pack the board in an anti-static bag with padding, and do not attempt repairs before the claim is settled.

Konica head claims

Head claims are the hardest because many failures relate to use. Support your claim with nozzle checks from installation onwards, records showing the voltage matched the head label and temperatures matched the ink maker’s guidance, the ink brand and its approval, evidence that the driver channel was tested before installation, and photos showing an undamaged nozzle plate and clean connector. Store the failed head capped with suitable flush as the supplier instructs. See why a bad driver board kills new heads and Konica 512i voltage settings.

Heads damaged by boards

If a head fails because of a faulty board, the head supplier may reject the claim while the board supplier may not cover the head. This is why testing the driver channel before fitting heads matters so much. If you suspect a board damaged a head, document both parts and discuss with both suppliers; when the same supplier provided both, a combined resolution is sometimes possible.

The claim process

  1. Stop using the part to avoid further damage.
  2. Read the warranty terms and claim procedure.
  3. Collect evidence.
  4. Contact the supplier promptly in writing with a factual description and evidence.
  5. Follow their instructions for tests or return.
  6. Pack parts properly and keep shipping receipts.
  7. Keep copies of all messages.
  8. Follow up politely if replies are slow.

Example claim message

“We bought a BYHX KM512i 8-head head board, serial X, invoice Y, on 5 August. It was installed on 8 August with power off and anti-static precautions; photos attached. The machine printed normally for three weeks. On 29 August heads 5 to 8 stopped with a ‘head board not found’ error (screenshot attached). Swapping cables with spares did not change the fault. Our earth was tested in June (record attached) and the machine runs through a servo stabiliser, UPS and surge protection. The board is removed and stored in its anti-static bag. Please advise on return or replacement.”

Understanding warranty language

  • Manufacturing defect: a fault from production, not use. Most part warranties cover only this.
  • Normal use: operation following the manual and recommended settings.
  • Replacement or repair at supplier’s discretion: the supplier chooses the remedy.
  • Return to base: you ship the part to the supplier, usually at your cost.

Imported parts

Parts bought directly from China are harder to claim: return shipping is slow and costly. Before buying, ask about the process, who pays shipping and whether photos and videos are accepted as first evidence. Local warranty from an Indian trader is often worth a slightly higher price.

Installation and warranty

Some suppliers require installation by their own technicians to honour warranty, especially for main boards and heads. If your staff install parts, ask first and record the steps with photos and video.

Warranty and power events

Most warranties exclude surge, lightning and power damage. Check whether your business insurance covers electrical breakdown or lightning damage to machinery, and what records insurers need. Surge protection, earth tests and storm procedures support both prevention and insurance claims. See our surge and lightning protection guide.

Warranty and used machines

Used flex machines usually carry little or no warranty unless bought from a dealer who offers one, and manufacturer warranty may not transfer. Ask in writing and budget for repairs. See our used flex machine electronics check.

When a claim is rejected

Ask for the reason and any test results or photos in writing. If you believe the decision is wrong, provide extra evidence calmly. Some suppliers offer a discounted replacement or repair as goodwill. Use the outcome as a lesson: if the cause was surge, wrong settings or handling, fix that so the next part survives. If the part is out of warranty, repair may still be economical; see repair vs replacement.

Lessons from rejected claims

Rejection reasonPrevention
Surge damageSPDs, earthing, stabiliser, UPS, storm procedures
Hot-plugging burnsPower-off rule for every connection
Solvent ink damageFix leaks quickly, keep covers on, clean regularly
Wrong settingsSettings records and label voltages
Incompatible inkHead approval from the ink maker
No evidencePhotos, logs and records

Warranty checklist when buying

  1. Warranty period and start date.
  2. What is covered and excluded.
  3. Claim process and contact person.
  4. Who pays shipping.
  5. Replacement, repair or refund.
  6. Installation requirements.
  7. Evidence required.
  8. Terms written on the invoice or warranty card.

Organising warranty records

Keep a folder, paper or digital, for each machine with invoices, warranty cards, serial numbers, installation records and claim messages. Put warranty expiry dates in a calendar so you can inspect parts before warranty ends and claim for developing faults in time. Our preventive maintenance checklist shows how to build these records routinely.

Example: claim rejected, lesson learned

A shop claimed for a new Konica head that failed within a week. The supplier found the voltage set well above the label value and no record of driver testing after the previous head failure in that position. The claim was rejected. The shop now tests channels and records label voltages, and has not lost a head that way since.

Machine warranties versus part warranties

New flex machines usually come with a machine warranty covering electronics for a period, often with heads excluded or limited. Parts bought later carry their own separate warranties. When a part fails during the machine warranty, the dealer usually handles the claim, but may ask for evidence of regular maintenance by trained staff or authorised technicians. Keep the machine warranty certificate, installation report and service records together, because a dealer’s first question is often whether the machine has been maintained as recommended.

Testing before return

Suppliers frequently ask for simple tests before accepting a return: swap tests, photos of status LEDs, videos showing the error and the board installed correctly, and sometimes voltage readings. Cooperate fully, but never attempt repairs or modifications. A short video showing the machine powering up, the error appearing and the part correctly seated is often the single most convincing piece of evidence you can send.

Warranty differences between suppliers

Terms vary widely. Some suppliers offer longer warranties with strict conditions; others offer short warranties with fast, simple replacement. A local trader with a six-month warranty who can swap a board the next day may be far more valuable than a longer warranty from a distant supplier with a slow process and expensive return shipping. Judge the whole service, including stock availability and technical support, not just the number of months.

Building trust with suppliers

Suppliers handle many claims, some genuine and some not. Customers who provide clear evidence, follow procedures and communicate politely usually receive faster and fairer outcomes. A long-term relationship, consistent purchasing and prompt payment also help when you need goodwill on a borderline case. Treat your supplier as a partner in keeping your machine running, and most will respond in kind.

Claim timeline template

Write the timeline as short dated lines: purchase date and invoice number; installation date, installer, settings used and tests passed; the normal operation period with nozzle check references; the first symptom and conditions; checks performed and their results; removal of the part with photos; and the date and method of the claim. A clear timeline helps the supplier’s technician understand what happened in minutes rather than days.

Video evidence

A phone video is now one of the strongest pieces of warranty evidence. Record the machine powering up, the error appearing on screen, the part correctly seated with its label visible, and the result of a swap test. Keep each clip short and clear, and state the date at the start. Suppliers in China and India alike respond faster to a thirty-second video than to a long written description, and it removes most doubts about installation errors.

Inspecting parts before warranty ends

A month before a part’s warranty expires, inspect it closely. Check nozzle checks for gradual decline, look at boards for early heat discolouration, review error logs for intermittent warnings and compare temperatures with earlier records. If you find signs of a developing fault, raise it with the supplier while the part is still covered. Many owners lose valid claims simply because a slowly failing part was ignored until just after the warranty ended.

Bottom line

A flex board warranty claim is won or lost on evidence. Read terms before buying, photograph parts on arrival, install them correctly, keep settings, nozzle check, maintenance and power records, stop using failed parts and claim promptly with a clear, factual message. The same habits prevent many failures in the first place.

Further reading: A warranty usually covers manufacturing defects under normal use, not damage from external causes.

Key takeaways

  • Claims succeed with evidence of normal use and correct practice.
  • Common exclusions are hot-plugging burns, surge, solvent ink, physical damage, wrong settings and repairs.
  • Keep invoices, photos, nozzle checks, settings, error logs and power records.
  • Stop using failed parts and contact suppliers promptly in writing.
  • Test driver channels before fitting heads to protect both the head and your claim.

More in the flex electronics planning series

Related reading on our site: Konica KM512i printhead price and lifespan, KM512i vs KM1024i printheads, flex printer mainboard and head board buyer checks, data and printhead cable handling and the flex printing machine maintenance checklist.

Running an Epson-head eco-solvent machine as well? Our sister series starts with the eco-solvent head carriage board guide and the complete guide to eco-solvent printer electronics.

Frequently Asked Questions

How do I make a warranty claim for a flex machine board?

Stop using it, collect the invoice, photos, error logs and records, contact the supplier in writing and follow their return process.

Why are Konica head claims often rejected?

Many head failures relate to use, such as clogging, high voltage, incompatible ink or electrical damage from boards.

Does surge damage count under warranty?

Usually not. Most warranties exclude surge and lightning damage.

Should I repair a board before claiming?

No. Repairs usually void the warranty. Claim first.

How long are flex board warranties?

Often three to six months, depending on the supplier. Get terms in writing.

Can wrong voltage settings void a head warranty?

Yes. Voltages far above the label value can lead to rejection.

What should a claim message include?

Part details, serial number, dates, a factual description, checks performed, evidence and your request.

Should I photograph parts on arrival?

Yes. Photos show condition on arrival and support later claims.

Are imported parts harder to claim?

Usually, because of shipping and communication. Local warranty can be worth paying a little more.

Does installing a part myself affect warranty?

It may with some suppliers. Ask first and record installation with photos and video.

What if a board damaged my new head?

Document both parts and discuss with both suppliers. Testing channels before fitting heads prevents this.

Can insurance cover lightning damage?

Some business policies cover electrical breakdown or lightning damage. Check your policy and its record requirements.

What if my claim is rejected?

Ask for reasons in writing, provide extra evidence if appropriate and fix the root cause.

Can Unified Engineering Dynamics help with warranty questions?

Yes. Our team can explain warranty terms on parts we supply and help prepare evidence for claims.

Does the machine warranty cover Konica heads?

Often heads are excluded or covered only for limited periods or defects. Check your machine warranty terms.

Is a longer warranty always better?

Not always. A shorter warranty with quick local replacement can be more useful than a longer one with a slow, distant process.

author-avatar

About Avinash Sharma

Avinash Sharma is the founder of Unified Engineering Dynamics (UED), an industrial digital printing machine supplier and engineering consultancy based in Uttar Pradesh, India. He works hands-on with flex printers, eco-solvent printers, UV flatbed and hybrid printers, DTF and sublimation machines, CO2 lasers and CNC routers - from installation and operator training to cost-per-print economics for new printing plants. His guides help first-time buyers across India choose the right machine for their budget, products and city, with honest setup costs and maintenance realities.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *