Direct answer: In the UV flatbed driver board vs main board question, the difference is location and job. The main board sits in the electronics cabinet and is the machine’s brain: it talks to the RIP PC, drives the X, Y and Z motors, reads the encoder, limit switches and vacuum controls, switches the UV lamps and streams print data to the carriage. The head board, or carriage board, rides on the carriage and distributes that data to each printhead, controls head heating and reads carriage sensors. The driver board, built into the head board on most Epson-head flatbeds and separate on many Ricoh machines, creates the high-voltage firing pulses for each nozzle. Knowing which board does what tells you where to look when something fails.
Settling the UV flatbed driver board vs main board question tells you exactly where to look when a fault appears, and which board to order.

Table of Contents
Flatbed owners hear many board names from suppliers and technicians: main board, mainboard, control board, head board, carriage board, driver board, transfer board, adapter, decoder. This guide sorts them out and shows how faults map to each board. It follows our explanation of the UV flatbed head driver board.
The three main boards at a glance
| Feature | Main board | Head (carriage) board | Driver board |
|---|---|---|---|
| Location | Electronics cabinet | Carriage | Carriage (integrated or separate) |
| Main job | Machine control and data | Data distribution to heads | Firing pulses for nozzles |
| Connects to | PC, motors, encoder, sensors, lamps, vacuum, carriage | Main board, heads, heaters, carriage sensors | Heads, head board |
| Typical failure symptoms | No connection, no motion, all heads stop, lamp or vacuum faults | One head missing, heating errors, sensor errors | Overcurrent, faint heads, new heads failing |
| Common causes | Power surges, earth faults, heat in cabinet | Ink, heat, cables, static, crashes | Shorted heads, heat, hot-plugging |
The main board in detail
The main board receives print jobs from the RIP over USB or network, interprets them, and coordinates the whole machine. On flatbeds it controls more axes than a roll machine: X for the carriage, Y for the table or gantry, and Z for head height. On large gantry machines it synchronises two Y motors. It also controls vacuum zones, lamp switching and sometimes the white ink circulation pump. Because everything passes through it, a main board fault often stops the whole machine. Our guide to UV flatbed main board functions and ports covers it in depth.
The head board in detail
The head board, also called the carriage board, receives data from the main board through a flat cable or fibre and splits it between heads. It also controls head heaters, reads thermistors, and on many flatbeds reads the height sensor and anti-collision switch. On Epson-head machines it usually includes the driver section. See UV flatbed carriage board explained.
The driver board in detail
The driver section creates waveforms and delivers current to each piezo head. On Ricoh flatbeds it may be a separate board per head group. It is the board most often damaged by shorted heads and hot-plugging.
Other boards you may hear about
| Name | What it usually means |
|---|---|
| Transfer board / adapter | Small board above each head connecting head cables |
| Decoder | Board or chip that allows certain Epson heads to work with third-party boards |
| Motor driver | Separate drivers for servo or stepper motors in the cabinet |
| Lamp driver / power supply | Powers UV LED lamps, controlled by the main board |
| Ink supply board | Controls pumps, level sensors and white circulation |
| Vacuum control relay board | Switches vacuum pump and zones |
UV flatbed driver board vs main board: fault mapping
| Symptom | Most likely board | Check first |
|---|---|---|
| PC cannot connect | Main board | USB/network cable, PC settings, software |
| Carriage or table does not move | Main board or motor driver | Motor cables, limit switches, driver alarms |
| Z-axis will not raise or lower | Main board or Z motor driver | Z limit switches, motor cable |
| All heads stop together | Main board or data link | Main data cable or fibre |
| One head missing | Head board or head | Cable swap tests |
| Overcurrent on one head | Driver or head | Head resistance, cable |
| Lamps not switching | Main board or lamp driver | Lamp power supply, cables |
| Vacuum zones not switching | Main board or relay board | Relays, valves, wiring |
| Height sensor errors | Head board or sensor | Sensor, wiring |
How the boards must match
Main board, head board and driver sections must come from the same system and compatible versions. A Hoson main board will not drive a Senyang head board, and different Hoson versions may not communicate. When replacing any one board, record the model and version of all of them. Our guide to UV flatbed board compatibility explains the rules.
Cost comparison
| Board | Indicative listed price (late 2026) |
|---|---|
| Hoson A3 flatbed main board (i3200/XP600/TX800) | About $304 |
| Hoson 2-head main board | About $380 |
| Hoson i3200 head board (1โ4 heads) | About $388โ450 |
| Hoson i3200 double carriage board (network) | About $430 |
| BYHX Gen5 4-head main board | About $845โ866 |
| Ricoh Gen5 carriage boards | About $287โ652 |
Prices exclude shipping, duty and GST. A correct diagnosis avoids buying the wrong board.
Example: “main board fault” that was a cable
A Delhi shop’s flatbed stopped printing on all heads. The supplier suspected the main board. A technician found the main data cable cracked in the Y-axis cable chain. A new cable cost a small fraction of a main board.
Example: driver fault mistaken for head fault
A 2513 lost the same Ricoh head position twice. Rather than buying a third head, the owner had the driver group tested. It was faulty. Replacing it stopped the failures.
Signal path from RIP to nozzle
Following the signal path step by step makes the UV flatbed driver board vs main board distinction clear, and shows where faults can enter.
| Step | Where | What happens | Typical failure point |
|---|---|---|---|
| 1 | RIP PC | Image is ripped into dot data for each channel | RIP settings, profiles |
| 2 | USB or network link | Data sent to the printer | Cable, port, PC power settings |
| 3 | Main board | Data buffered, synchronised with encoder and motion | Main board, firmware, encoder |
| 4 | Main data cable or fibre | Data streamed to carriage | Cable chain wear |
| 5 | Head board | Data split per head and row | Head board logic, connectors |
| 6 | Driver section | Waveforms generated and applied | Driver channel, supply rail |
| 7 | Head cable and adapter | Signals carried to the head | Cable, adapter |
| 8 | Printhead | Piezo elements fire drops | Clogging, damage |
A fault at any step can stop printing. Diagnosis works best when you test from the simplest and cheapest steps first: cables and settings before boards.
Power distribution between the boards
Each board needs power. The main board is usually fed from a power supply in the cabinet. The carriage boards receive power through cables in the cable chain, sometimes from a separate carriage power supply. Driver sections need a higher drive rail. Lamp drivers, motor drivers and vacuum pumps have their own supplies. A failed power supply can mimic a board fault, for example a carriage supply failure makes all heads disappear just as a head board fault would. Check power supply indicator lights and, with a technician, measure output voltages before condemning a board.
| Power supply | Feeds | Failure looks like |
|---|---|---|
| Main logic supply | Main board | Machine dead or not connecting |
| Carriage supply | Head and driver boards | All heads missing |
| Motor supply | Motor drivers | No motion, driver alarms |
| Lamp supply | UV LED lamps | Lamps off, under-curing |
Board identification tips
When asking for help, describe boards by location and appearance as well as name. Photograph each board with its labels readable, note the number and type of connectors, and include a wide photo showing where it sits. For example: “board in the cabinet with USB, motor and encoder connectors” is the main board; “board under the carriage cover with four ribbon cable sockets” is the head board. This avoids confusion caused by suppliers using different names.
Which board to suspect after common events
| Event | Board most at risk |
|---|---|
| Hot-plugging a head cable | Head board and driver |
| Head crash | Head board, adapter, driver |
| Lightning storm or surge | Main board, power supplies |
| Ink leak on carriage | Head board |
| Cabinet fan failure | Main board, motor drivers |
| Generator changeover spike | Power supplies, main board |
| Static discharge from acrylic | Head board, sometimes main board |
Keeping all boards healthy
The main board benefits from a clean, cool cabinet with working fans and dust filters, plus good power protection. The head and driver boards benefit from clean carriages, working lamp cooling, careful head changes and static control. Schedule a monthly inspection of both areas, with power off, and record what you find. Our UV flatbed preventive maintenance checklist lists the tasks.
UV flatbed driver board vs main board: replacement differences
| Aspect | Main board replacement | Head/driver board replacement |
|---|---|---|
| Settings affected | Machine parameters, axes, vacuum, lamps, sometimes licence | Head voltages, temperatures, offsets |
| Licence or dongle | Often tied to main board | Rarely |
| Calibration after | Axis, height, step, bidirectional | Head alignment, bidirectional |
| Typical time | Half a day or more | Two to four hours |
| Risk | Losing machine parameters | Damaging heads if channel or cable faulty |
Main board replacement often involves licence transfer or a new dongle, because many print control systems tie their licence to the main board. Ask the supplier about this before ordering. See our guide to UV flatbed main board replacement and licences.
Backups for each board
Before any board work, back up both machine parameters (stored on or associated with the main board) and head settings (voltages, temperatures, offsets). Machine parameters include axis directions, motor steps, encoder settings, Z-axis limits, height sensor offsets, vacuum zone mapping and lamp timing. Losing these can take a technician many hours to rebuild. Photograph every settings screen if export is not available, and store backups away from the printer PC.
Why naming matters when ordering
Ordering “a board” without specifying which one leads to costly mistakes. Some suppliers call the head board the “carriage board”, others call the main board the “control board” or “mainboard”. Always send photos, part numbers and versions, describe the board’s location, and confirm in writing exactly which board is being supplied. When in doubt, ask the supplier to mark the photo of the board they are quoting.
Which board to call about first
When a fault appears, start with the cheapest and most accessible checks: cables, settings and power supplies. Then work along the signal path. If the PC cannot see the printer, start at the main board end. If one head misbehaves, start at the carriage. Clear thinking about which board does what saves hours of guesswork and avoids ordering the wrong part.
Bottom line
For the UV flatbed driver board vs main board question, remember: the main board controls the machine, the head board distributes data on the carriage, and the driver fires the nozzles. Map symptoms to the right board, check cables first, match versions across all boards, and test drivers before replacing heads.
Further reading: Each of these is a multi-layer printed circuit board carrying its own processors, regulators and connectors.
Key takeaways
- The main board controls motors, sensors, lamps, vacuum and data from the PC.
- The head board distributes data to heads and controls heating and carriage sensors.
- The driver creates firing pulses and is often integrated in the head board.
- Symptoms point to specific boards; cables often mimic board faults.
- All boards must come from the same system and compatible versions.
More in the UV flatbed head driver board series
- UV Flatbed Head Driver Board Explained
- UV Flatbed Driver Board Failure Signs
- Why a New UV Flatbed Head Fails Fast
- Epson i3200-U1 Head Voltage on UV Flatbeds
- UV Flatbed Board Compatibility
- UV Flatbed Board Repair vs Replacement
- UV Flatbed Stabilizer, UPS and Earthing
- UV Flatbed Lamp Cooling and Board Overheating
Related reading on our site: UV flatbed printer spare parts buyer’s guide, UV flatbed boards, cables, motors and interlock spares, UV flatbed printer problems and fixes, Epson i3200 vs XP600 printheads and UV flatbed printer price in India.
Running a UV roll to roll machine as well? The matching guide in our roll to roll series is Head Driver Board vs Head Board vs Mainboard.
Frequently Asked Questions
What is the difference between a UV flatbed driver board and main board?
The main board controls the whole machine from the cabinet; the driver creates firing pulses for heads on the carriage.
Is the head board the same as the carriage board?
Yes, the terms are generally used for the same board on the carriage.
Where is the driver on Epson-head flatbeds?
Usually built into the Hoson or Senyang head board.
Which board controls the Z-axis?
The main board, often through a separate motor driver.
What does it mean if all heads stop together?
Usually a main board, data cable or power problem rather than a head board fault.
Which board controls UV lamps?
The main board controls lamp switching through a lamp driver or power supply.
What is a transfer board?
A small adapter board above each head that connects head cables.
Can I mix boards from different systems?
No. Main, head and driver boards must come from the same system and compatible versions.
How much does a Hoson flatbed main board cost?
Late 2026 listings showed about $304 for an A3 flatbed main board and about $380 for a 2-head main board.
How do I know which board has failed?
Map the symptom to the board, check cables and run swap tests before buying.
Which board controls vacuum zones?
The main board, usually through relays or a separate relay board.
Can a cable fault look like a main board fault?
Yes. A cracked main data cable can stop all heads.
What is a decoder?
A board or chip that allows some Epson heads to work with third-party boards.
Can Unified Engineering Dynamics help identify my boards?
Yes. Send photos of each board and our team will help identify them.
Can a power supply failure look like a board failure?
Yes. A failed carriage supply makes all heads disappear, just like a head board fault.
Which board is most at risk after a lightning storm?
Usually the main board and power supplies.
How should I describe a board to a supplier?
Give its location, connectors, labels and clear photos, not just a name.
What path does print data take?
From the RIP PC to the main board, through the data cable to the head board, then the driver and head.
Is the licence tied to the main board?
Often yes. Ask the supplier about licence transfer or dongles before replacing a main board.