UV Printing

Epson i3200-U1 Head Voltage on UV Flatbeds: How to Read the Label and Set It Correctly

i3200-U1 Head Voltage UV Flatbed Guide: Reading the Label

Direct answer: Getting i3200-U1 head voltage UV flatbed settings right means entering, for each head, the drive voltage specified on that head’s own label or documentation, in that head’s channel in the Hoson or Senyang print control software, and then adjusting only within the range your board maker allows after a nozzle check and print test. Never copy a voltage from another head, never raise it to “fix” missing nozzles, and re-enter it whenever a head is replaced or software is reinstalled. Too low a voltage gives faint, small drops and missing nozzles; too high a voltage overdrives the piezo elements, causing mist, satellites, more ink on the nozzle plate and shorter head life.

Correct i3200-U1 head voltage UV flatbed settings protect a head worth about โ‚น78,000โ€“95,000 and keep every colour, white and varnish channel jetting evenly.

i3200-U1 Head Voltage UV Flatbed Guide: Reading the Label
i3200-U1 Head Voltage UV Flatbed Guide: Reading the Label

Head voltage is one of the most misunderstood settings on UV flatbeds. Operators often treat it like a brightness control, raising it whenever print quality drops. This guide explains what the voltage does, how to set it correctly on i3200-U1 heads, and how to avoid common mistakes. It builds on our explanation of the UV flatbed head driver board.

What head voltage does

Each nozzle of an i3200-U1 has a piezo element. The driver board applies a voltage waveform that makes it flex and eject a drop. The peak voltage determines how strongly the element flexes:

VoltageEffect
Too lowSmall drops, weak colour, missing or deflected nozzles
CorrectConsistent drop size and speed, clean lines, normal head life
Too highLarge drops, satellites, mist, ink build-up on nozzle plate, overheating, shortened life

Every head is slightly different because of manufacturing tolerances, which is why Epson labels each head individually.

Reading the i3200-U1 label

Each i3200-U1 head carries a label with identification and voltage information. Depending on the head and board system, the voltage may be printed as a value or as a code that the software converts. Photograph the label before installation, because it can be hard to read once the head is mounted. Keep the photo in your machine records with the head’s position and installation date.

Setting i3200-U1 head voltage UV flatbed software step by step

  1. Photograph the head label before fitting.
  2. Install the head with power off, following safe procedures.
  3. Open the print control software’s head or voltage settings.
  4. Select the channel for the head’s position.
  5. Enter the label value or code exactly.
  6. Save settings and restart if required.
  7. Heat the head to its operating temperature.
  8. Print a nozzle check and a test image.
  9. Only if your board maker advises, fine-tune within a small range for drop consistency between heads.
  10. Record the final value.

Common mistakes

MistakeResult
Copying voltage from another headOne head under- or overdriven
Raising voltage to fix missing nozzlesMasks clogging, shortens head life
Forgetting to update after head changeNew head runs at old head’s value
Software reinstall without backupAll heads reset to defaults
Wrong channelTwo heads with swapped values

Voltage vs temperature

UV ink viscosity changes with temperature. A cold head behaves like an underdriven head: drops are smaller and slower. Before adjusting voltage, check head temperature is at the setting recommended for your ink. In winter, cold rooms can make heads take longer to reach temperature. On flatbeds, check the heaters and thermistors are working before blaming voltage.

Voltage and waveform

Voltage is only one part of the firing signal. Board systems use waveform files that define the pulse shape for each head type and ink. Using the wrong waveform, for example one intended for eco-solvent ink, can cause poor jetting even with correct voltage. Make sure your software uses the waveform intended for i3200-U1 heads and your UV ink, as provided by your board or ink supplier.

When voltage is not the problem

If a head prints poorly at its label voltage, check:

  • Nozzle plate condition and cured ink.
  • Ink supply, filters, dampers and negative pressure.
  • Head temperature.
  • Cable seating and condition.
  • Driver channel health.
  • Correct waveform.

See our guide to UV flatbed head board failure symptoms.

XP600, TX800 and Ricoh comparisons

HeadVoltage setting
Epson XP600Set per head from label or supplier guidance
Epson TX800Set per head from label or supplier guidance
Epson i3200-U1Set per head from label
Ricoh Gen5/Gen6Voltage or waveform settings from board maker; some heads carry individual data

Regardless of head type, the rule is the same: use the value specified for that head.

Recording and backup

Keep a table of head position, serial, label voltage, date fitted and any approved adjustments. Back up software settings after every head change. If the PC fails or software is reinstalled, you can restore voltages quickly and safely.

Example: faint yellow after software update

A Lucknow studio updated its print software and found yellow printing faint. The update had reset voltages to defaults. Restoring the label values from the backup fixed all heads.

Example: raising voltage to fix banding

An operator raised a head’s voltage repeatedly to fix banding. The real cause was a clogged filter. The overdriven head developed mist and lasted far less time than expected. Replacing filters and returning to the label voltage would have avoided this.

Balancing heads in a multi-head i3200 flatbed

On flatbeds with two, three or four i3200-U1 heads, colour and white heads should produce matching drop sizes so that overlapping areas print evenly. When each head runs at its own label voltage, drop sizes are generally consistent. If one head still prints noticeably lighter or darker after correct voltage, temperature and cleaning, check that head’s alignment, height and ink supply before adjusting voltage. Some board makers allow small trims to balance heads, but these should be made only according to their guidance and recorded carefully.

i3200-U1 head voltage UV flatbed checklist

StepDone
Label photographed and storedโ˜
Channel and head position confirmedโ˜
Label value entered in correct channelโ˜
Settings saved and backed upโ˜
Head temperature reachedโ˜
Nozzle check printedโ˜
Test image printedโ˜
Value recorded in head logโ˜

Voltage and white ink heads

White UV ink is heavier and more viscous than colour inks because of its pigment. The white head still uses its own label voltage, but white performance depends heavily on temperature and circulation. If the white head prints thin or patchy, check circulation, filters and temperature first. Raising voltage to compensate for settled pigment risks overdriving the head without fixing the underlying problem. See our guide to UV white ink circulation.

Voltage and varnish heads

Varnish heads also run at their label voltage. Because varnish is clear, problems are hard to see on standard nozzle checks. Print the varnish nozzle check on black paper and view it at an angle. If varnish lines are missing, check supply and cleaning before touching voltage.

Head ageing and voltage

As heads age, some operators notice slightly weaker jetting. The usual causes are partially blocked nozzles, worn nozzle plates or ink residue, not a need for higher voltage. Before considering any adjustment on an older head, run cleaning, check filters and inspect the nozzle plate. If the head no longer prints well at its label voltage after proper maintenance, it may be nearing the end of its life. Plan a replacement rather than overdriving it, because an overdriven failing head can also stress the driver channel.

Software backups that include voltage

Most Hoson and Senyang print control software stores voltages in configuration files. Find out where your software saves these files and copy them to a USB drive and cloud storage after every head change. If the software lacks an export option, photograph the voltage screen. A PC failure without a backup can leave you guessing voltages for heads worth about โ‚น78,000โ€“95,000 each, which is a risk no shop should take.

Voltage questions to ask when buying heads

  1. Is the head a genuine i3200-U1 with an original label?
  2. Is the label readable, and will you send a photo before shipping?
  3. Has the head been tested, and at what voltage?
  4. Is there a recommended waveform for my ink?
  5. What warranty applies?

Troubleshooting table for i3200-U1 head voltage UV flatbed issues

SymptomCheck firstVoltage-related?
Whole head faint after software updateVoltage reset to defaultYes โ€“ restore label value
One head faint, others normalTemperature, ink, nozzle plate, then voltage entryPossibly โ€“ confirm entry
Mist and satellites from one headHead height, voltage too highPossibly โ€“ confirm entry
Missing nozzles in patchesClogging, air, cableUnlikely
Faint whiteCirculation, temperatureUnlikely
New head prints differently from oldNew label value entered?Yes โ€“ enter new label value

Head height and voltage interaction

Head-to-substrate distance affects how drops land. A larger gap gives drops more time to drift, causing fuzzy edges and overspray that operators may mistake for voltage problems. Before adjusting voltage for print sharpness, confirm the head gap is correct for the substrate. On flatbeds where height is entered manually, an incorrect thickness value is a common cause of fuzzy prints.

Environmental factors

Room temperature and humidity affect ink behaviour. In cold winter mornings in north India, heads and ink take longer to reach operating temperature, and early prints may look underdriven. Allow sufficient warm-up time and check that head and ink heaters work. In hot summers, ink becomes thinner, and over-temperature can cause excess wetting of the nozzle plate. Keep the room within the machine maker’s recommended range rather than compensating with voltage changes.

When to ask for help

If you are unsure how your software stores voltage, or whether a value is a voltage or a code, ask your board supplier or machine maker. Never experiment with large voltage changes on expensive i3200-U1 heads. A quick message with a photo of the label and the settings screen usually resolves doubts in minutes.

Voltage and print modes

Print modes with different resolutions and passes do not normally require different head voltages; the waveform and dot sizes are handled by the software and board. If a particular mode prints poorly, check the mode’s settings, calibration and RIP profile rather than adjusting voltage.

Summary table: do and don’t

DoDon’t
Use each head’s own label valueCopy voltage between heads
Check temperature, ink and waveform firstRaise voltage to hide clogging
Re-enter values after head changes and reinstallsAssume settings survive updates
Record and back up voltagesRely on memory
Ask the supplier when unsureExperiment with large changes

Following these simple rules keeps expensive i3200-U1 heads jetting consistently and protects the driver channels that feed them.

Voltage records for multiple machines

Shops running several flatbeds should keep a separate voltage log for each machine and label heads clearly when moving them between machines for testing. A head moved from one machine to another keeps its own label voltage, which must be entered in the new machine’s channel. Mixing up records between machines is a common source of faint or overdriven heads in multi-machine shops. A shared spreadsheet with one tab per machine, updated after every head change, solves the problem.

Bottom line

Correct i3200-U1 head voltage UV flatbed settings come from each head’s own label, entered in the right channel and re-entered whenever heads or software change. Check temperature, ink and waveform before touching voltage, never raise voltage to hide clogging, and keep records and backups. Correct voltage protects expensive heads and keeps print quality consistent.

Further reading: Head voltage sets how far each element flexes through piezoelectricity, which is why every head is labelled individually.

Key takeaways

  • Each i3200-U1 has its own label voltage; use it for that head only.
  • Too low gives faint printing; too high shortens head life.
  • Check temperature, ink and waveform before adjusting voltage.
  • Re-enter voltage after head changes and software reinstalls.
  • Keep records and back up settings.

More in the UV flatbed head driver board series

Related reading on our site: UV flatbed printer spare parts buyer’s guide, UV flatbed boards, cables, motors and interlock spares, UV flatbed printer problems and fixes, Epson i3200 vs XP600 printheads and UV flatbed printer price in India.

Running a UV roll to roll machine as well? The matching guide in our roll to roll series is Ricoh Gen5/Gen6 Head Voltage and Waveform for UV Ink.

Frequently Asked Questions

Where do I find the i3200-U1 head voltage?

On the head’s label or documentation. Photograph it before fitting.

Can I use the same voltage for all heads?

No. Each head has its own recommended value.

What happens if voltage is too low?

Drops are small and weak, causing faint colour and missing nozzles.

What happens if voltage is too high?

The head is overdriven, causing mist, satellites and shorter life.

Should I raise voltage to fix missing nozzles?

No. Find the real cause, such as clogging or low temperature.

Does temperature affect jetting?

Yes. Cold UV ink is thicker and behaves like an underdriven head.

What is a waveform?

The pulse shape used to fire nozzles, defined per head and ink type.

Do I need to re-enter voltage after a software update?

Check it. Updates and reinstalls can reset settings to defaults.

Where do I enter voltage?

In the head or voltage settings of your Hoson or Senyang print software, for the correct channel.

Can I fine-tune voltage?

Only within the range your board maker advises, after checking nozzles and prints.

Do Ricoh heads use voltage settings?

Yes, through voltage or waveform settings provided by the board maker.

Why should I keep a voltage record?

To restore settings quickly after head changes, PC failures or reinstalls.

Can wrong voltage damage the board?

Extreme settings can stress the driver and head. Use label values.

Can Unified Engineering Dynamics help with i3200-U1 settings?

Yes. Our team can advise on head settings and supply genuine i3200-U1 heads.

How do I balance multiple i3200 heads?

Run each at its label voltage, then check alignment, height and ink before any small trims allowed by the board maker.

Should I raise voltage on the white head?

No. Check circulation, filters and temperature first.

Do older heads need higher voltage?

Usually not. Weak jetting on older heads is normally caused by blockages or wear.

Where are voltage settings saved?

In the print control software’s configuration files. Back them up after every head change.

author-avatar

About Avinash Sharma

Avinash Sharma is the founder of Unified Engineering Dynamics (UED), an industrial digital printing machine supplier and engineering consultancy based in Uttar Pradesh, India. He works hands-on with flex printers, eco-solvent printers, UV flatbed and hybrid printers, DTF and sublimation machines, CO2 lasers and CNC routers - from installation and operator training to cost-per-print economics for new printing plants. His guides help first-time buyers across India choose the right machine for their budget, products and city, with honest setup costs and maintenance realities.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *