UV Printing

Used UV Roll to Roll Printer Electronics Check: Boards, Heads, Lamps and Chiller Before You Buy

Used UV Roll to Roll Printer: Electronics Checks to Make

Direct answer: Before buying a used UV roll to roll printer, check the electronics as carefully as the mechanics. Identify the board system, versions and software licence; confirm the licence can be transferred; inspect main, carriage and driver boards for burns, corrosion and ink; run full nozzle checks on every head; test head temperatures and voltages against label values; check UV LED lamps for even curing and the chiller for flow and temperature; inspect cable chains, data cables and power supplies; review error logs; and print a long test job to reveal heat-related faults. Get the seller to show the printer running, not just switching on.

A careful electronics check is the best protection when buying a used UV roll to roll printer, because hidden faults can cost more than the machine.

Used UV Roll to Roll Printer: Electronics Checks to Make
Used UV Roll to Roll Printer: Electronics Checks to Make

Used UV roll to roll printers can be good value, but electronics problems can turn a bargain into a money pit. Heads alone can cost over โ‚น1.25 lakh each, and boards, lamps and chillers add up quickly. This checklist helps buyers in India inspect a used machine’s electronics. It draws on our guides to main boards, carriage boards and driver boards.

Before visiting a used UV roll to roll printer

  • Ask for make, model, year, width and serial number.
  • Ask for head type and count, board system and software version.
  • Ask for service history, head replacement dates and board repairs.
  • Ask whether the software licence and dongle are included and transferable.
  • Ask why the machine is being sold.
  • Arrange to see it running with ink loaded and lamps working.

Board system and licence

Confirm the board system (BYHX, Hoson, Senyang or other) from the software and board labels. Check that the print control software runs and shows the expected versions. Ask whether the licence is tied to the main board, a dongle or the original reseller. If the licence cannot be transferred, budget for a new one or walk away. Our article on main board replacement and licences explains licence types.

Board inspection

With the seller’s permission and power off, inspect:

BoardWhat to look for
Main boardBurn marks, swollen capacitors, damaged ports, dust, signs of repair
Carriage boardInk contamination, cured ink, burnt connectors, heat discolouration
Driver / adapter boardsBurnt components, hot spots, missing heat sinks or fans
Power suppliesSwollen capacitors, fan noise, burn smell
CabinetClogged filters, dead fans, dust

Heavy ink contamination and repeated repair marks suggest a hard life.

Head checks

  1. Print a full nozzle check on every head after normal cleaning.
  2. Note missing, weak or deflected nozzles.
  3. Check head temperatures reach set points.
  4. Compare set voltages with head label values. Voltages far above label values may hide worn heads.
  5. Ask for head serial numbers and dates fitted.
  6. Run a long print and repeat the nozzle check to see whether heads hold up.

Head replacement is expensive: Indian traders list Ricoh Gen5 heads around โ‚น1.25โ€“1.55 lakh and Gen6 around โ‚น1.7 lakh. Factor head condition into the price. See our guide to Ricoh Gen5 head voltage.

UV LED lamps and curing

  • Check both lamps switch on and reach full power.
  • Print a test and check curing at both edges and centre with a thumb-twist or tape test.
  • Look for darkened or damaged lamp windows.
  • Ask about lamp age and replacement history.

See our guide to UV cure and adhesion testing.

Chiller

  • Check coolant level, colour and cleanliness.
  • Check flow and temperature alarms.
  • Watch coolant temperature during a long print.
  • Inspect hoses for wear and leaks.
  • Check condenser cleanliness.

CW-5200 class chillers cost around โ‚น24,000โ€“35,000 in India if replacement is needed.

Cables and cable chain

  • Inspect data cables, power cables and hoses in the cable chain for wear.
  • Check connectors are secure.
  • Look for taped or spliced cables, which suggest past problems.

Motion and encoder

  • Watch initialisation and carriage movement for smoothness.
  • Check the encoder strip for dirt and damage.
  • Check feed accuracy with a test print.

Error logs

Ask to see the software error log. Frequent overcurrent, temperature, communication or lamp errors point to problems the seller may not mention.

Long test print

Many faults appear only when the machine is warm. Ask the seller to run a long job of at least 30 to 60 minutes on media you care about. Watch for banding, missing nozzles, curing changes, errors and resets.

Budgeting for repairs

Issue foundIndicative cost to fix
One worn Ricoh Gen5 headAbout โ‚น1.25โ€“1.55 lakh
Carriage board replacementAbout $287โ€“652 plus import costs
Main board replacementAbout $180โ€“1,420 depending on type
UV LED lampAbout โ‚น12,000โ€“15,000
ChillerAbout โ‚น24,000โ€“35,000
Licence transfer or new licenceVaries

Deduct expected repair costs from your offer.

Red flags

  • Seller will not show the machine printing.
  • No licence or dongle, or licence tied to someone else.
  • Heavy ink contamination on boards.
  • Head voltages far above label values.
  • Frequent errors in the log.
  • Machine recently “repaired” just before sale with no details.
  • Obsolete board system with no spares.

Example: hidden head problem

A buyer in Lucknow looked at a used 3.2 m machine. The nozzle check looked good, but voltages were set well above label values. During a long print, two heads lost nozzles. The buyer negotiated the price down by the cost of two heads.

Example: licence problem

Another buyer nearly purchased a machine whose software licence was controlled by the original reseller. After checking, they found a new licence would cost extra and take weeks. They factored this into the price.

Questions to ask the seller

QuestionWhy it matters
When were heads last replaced, and which?Head age and cost of replacement
Have any boards been replaced or repaired?Reveals past electrical problems
Has the machine suffered surge or lightning damage?Hidden damage risk
What ink has been used?Ink compatibility and head condition
How many hours or square metres printed?Overall wear
Are manuals, software installers and licence codes included?Future support
Is the original reseller still supporting it?Access to parts and licences
Why is it being sold?Context for condition

Tools to bring

  • A torch for inspecting boards and the cable chain.
  • A multimeter, if a technician accompanies you.
  • An infrared thermometer for checking heat sinks and lamp housings after a run.
  • Your own test file and a roll of media you commonly use.
  • A phone camera to record nozzle checks, labels and board conditions.
  • Tape for an adhesion test.

Ink system faults can damage electronics and heads. Check for leaks around dampers and the carriage, look for ink on boards and cables, check that white ink circulation runs, and inspect filters. A machine that has been left idle with white ink not circulating may have clogged lines and heads. Our guide to UV white ink circulation explains what to check.

Machines that have been idle

A machine that has stood unused for months carries extra risk. UV ink can thicken in lines and heads, capacitors in power supplies can age, and dust can collect on boards. If buying an idle machine, insist on seeing it flushed, primed and printing, and budget for possible head and ink system work.

Negotiating with facts

Use your inspection results to negotiate. List each issue found with an estimated repair cost based on current prices, such as heads at about โ‚น1.25โ€“1.55 lakh each, lamps at about โ‚น12,000โ€“15,000, chillers at about โ‚น24,000โ€“35,000 and boards in the hundreds of dollars. A clear, fact-based list is more persuasive than vague concerns, and it helps both sides agree a fair price.

After purchase: first steps

  1. Transfer or activate licences before moving the machine, if possible.
  2. Photograph all boards and cables before dismantling for transport.
  3. Flush and cap heads properly for transport as advised by a technician.
  4. Install with proper power protection and earthing.
  5. Record all versions and settings.
  6. Perform full calibration and a thorough electronics check before production.

Our guide to the installation space and power checklist helps with setting up the machine at your site.

Scoring a used machine

A simple scorecard helps compare machines objectively. Score each area from 1 (poor) to 5 (excellent):

AreaWhat a 5 looks like
HeadsFull nozzle checks, voltages near label values, stable after long run
BoardsClean, no burns or repairs, current supported versions
LicenceTransferable, codes and dongle included
LampsBoth full power, even curing
ChillerClean coolant, holds temperature, no alarms
Cables and chainNo wear, no splices
MotionSmooth, accurate feed, clean encoder
DocumentationManuals, service history, settings backups

A machine scoring well across all areas is worth more than one with a great price but several low scores.

Used machines from different sources

  • From another print shop: often well documented if the owner kept records; ask for contact with their technician.
  • From a dealer: may be refurbished with some warranty; ask what was replaced.
  • From auctions or closures: often cheapest but with little history; inspect very thoroughly.
  • Imported used machines: check voltage compatibility, licences and local support.

Example: a good buy

A buyer in Lucknow inspected a three-year-old 3.2 m UV roll to roll printer from a print shop upgrading to a larger machine. The seller provided service records, head replacement dates, settings backups and the licence dongle with a transfer letter from the reseller. Nozzle checks were full, voltages were near label values, both lamps cured evenly, and the chiller held temperature during a one-hour test print. The buyer paid a fair price and had the machine in production within a week of delivery.

Transport and reinstallation risks

Moving a UV roll to roll printer carries risk to heads and electronics. Heads must be flushed and capped properly, white ink lines drained or circulated as advised, and boards protected from vibration and moisture. Cables should be labelled before disconnection. Reinstallation needs proper power, earthing, levelling and calibration. Budget for a technician to handle both ends if possible.

Warranty on used machines

Private sellers rarely offer warranties. Dealers may offer a short warranty on refurbished machines. Get any warranty in writing, including what is covered, for how long and who provides service. Without a warranty, your inspection is your main protection.

Hidden costs after buying

Even a healthy used machine usually needs some spending before production: fresh ink and flushing, new filters and wipers, coolant replacement, possibly new cables and fans, calibration and colour profiling for your media, and installation of proper power protection. Budget a reserve for these items, and do not treat the purchase price as the total cost. Our guide to lamp, ink and filter replacement costs helps estimate consumable costs.

Comparing used with new

Before committing to a used machine, compare total cost with a new one: purchase price, expected repairs, consumables, licence costs, transport and installation, and the value of a manufacturer’s warranty and support. Our guide to UV roll to roll printer prices in India gives new-machine price ranges. Sometimes a used machine is excellent value; sometimes the gap to a new machine with warranty is smaller than it first appears.

Bottom line

A used UV roll to roll printer can be an excellent investment if its electronics are healthy and its licence is transferable. Take time to check boards, heads, lamps, chiller, cables and logs, run a long test print, and negotiate based on facts. Walk away from machines with major red flags, however attractive the price.

Further reading: Treat the inspection as due diligence: verify claims before you pay.

Key takeaways

  • Check a used UV roll to roll printer’s electronics as carefully as its mechanics.
  • Confirm board system, versions and licence transfer.
  • Run nozzle checks, compare head voltages with labels, and test curing and the chiller.
  • Review error logs and run a long test print.
  • Deduct expected repair costs from your offer.

More in the UV main board series

Related reading on our site: UV roll to roll printer price in India, Ricoh Gen5 vs Gen5i printheads, UV LED lamp and module replacement checks, UV curing problems: lamp, ink and power checks and white ink circulation engineering.

Also running solvent or eco-solvent machines? See our sister guides to the solvent flex machine main board and the eco-solvent printer main board.

Frequently Asked Questions

What should I check first on a used UV roll to roll printer?

Confirm the board system, software and licence transfer, then check heads, lamps, chiller and boards with the machine running.

How do I check printhead condition?

Print nozzle checks, compare voltages with head labels, check temperatures and run a long print to see whether heads hold up.

Why does the software licence matter?

Without a transferable licence, the printer may not work or may need an expensive new licence.

Should I insist on seeing the printer running?

Yes. Many faults only appear during printing, especially after the machine warms up.

What does ink on boards tell me?

Heavy contamination suggests leaks or poor maintenance and increases the risk of board failures.

How much do replacement heads cost?

Indian traders list Ricoh Gen5 heads around โ‚น1.25โ€“1.55 lakh and Gen6 around โ‚น1.7 lakh.

How can I check UV lamps?

Check that both lamps reach full power and test curing across the print width.

What chiller checks should I do?

Check coolant condition, alarms, temperature during a long print, hoses and condenser.

Is an obsolete board system a problem?

Yes. If spares are unavailable, future repairs may require a costly system change.

How long should the test print be?

At least 30 to 60 minutes to reveal heat-related faults.

Should I bring a technician?

Yes, if possible. An experienced technician can spot problems quickly.

Can Unified Engineering Dynamics inspect a used printer?

Our team can advise on what to check and supply parts for used UV roll to roll printers.

Is it risky to buy a UV printer that has been idle for months?

Yes. Ink can thicken in lines and heads, and electronics may have aged. Insist on seeing it printing and budget for possible head and ink system work.

What tools should I bring to inspect a used printer?

A torch, an infrared thermometer, your own test file and media, a phone camera, tape for adhesion tests and, ideally, a technician with a multimeter.

Is a used printer from a dealer safer than from a print shop?

Dealers may offer refurbishment and some warranty, while print shops may provide better history. Either way, inspect thoroughly.

Should I walk away if the licence cannot be transferred?

Unless you can get a new licence at acceptable cost, yes. Without a working licence, the printer may not operate.

Do used UV printers come with a warranty?

Private sales usually do not. Dealers may offer a short warranty on refurbished machines. Get any warranty terms in writing.

What should I budget for after buying a used UV printer?

Ink and flushing, filters and wipers, coolant, possible cables and fans, calibration, colour profiling and power protection.

Is a used UV roll to roll printer always cheaper than new?

Not always. After repairs, licences, transport and lack of warranty, the gap can be smaller than it appears. Compare total costs.

author-avatar

About Avinash Sharma

Avinash Sharma is the founder of Unified Engineering Dynamics (UED), an industrial digital printing machine supplier and engineering consultancy based in Uttar Pradesh, India. He works hands-on with flex printers, eco-solvent printers, UV flatbed and hybrid printers, DTF and sublimation machines, CO2 lasers and CNC routers - from installation and operator training to cost-per-print economics for new printing plants. His guides help first-time buyers across India choose the right machine for their budget, products and city, with honest setup costs and maintenance realities.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *