Direct answer: A Ricoh Gen5 to Gen6 upgrade on a UV roll to roll printer is not a simple head swap. Gen6 heads need Gen6-compatible main and carriage boards, adapters, cables, firmware, print control software and waveforms, and the ink system, head mounting and calibration must be checked too. Gen6 offers higher firing frequency, smaller minimum drops and potentially faster, finer printing. The upgrade is usually worth considering only if your Gen5 heads are worn out anyway, your work demands extra speed or finer detail, and your machine’s mechanics, encoder, motion and curing can make use of it. For many shops, replacing worn Gen5 heads is still the better-value choice.
A Ricoh Gen5 to Gen6 upgrade can lift quality and speed, but only when the boards, ink, lamps and mechanics can support it.

Table of Contents
Ricoh Gen6 heads have become more common on new UV roll to roll printers, and owners of Gen5 machines often ask whether they should upgrade. This guide explains what changes, what it costs, and how to decide. It builds on our guides to Ricoh Gen5 head voltage and waveform and UV driver board compatibility.
Gen5 vs Gen6: the key differences
| Feature | Ricoh Gen5 | Ricoh Gen6 |
|---|---|---|
| Nozzles per head | 1,280 | 1,280 |
| Minimum drop (approx.) | About 7 pl | About 5 pl |
| Firing frequency | Lower | Higher, supports faster printing |
| Indicative head price in India | About โน1.25โ1.55 lakh | About โน1.7 lakh |
| Board support | Gen5 boards | Gen6 boards required |
| Installed base in India | Very large | Growing |
Specifications vary by variant and mode; check current Ricoh documentation. For more on head choices, see our pages on Ricoh Gen6 printhead price in India and Ricoh Gen5 vs Gen5i.
What must change in a Ricoh Gen5 to Gen6 upgrade
Boards
Gen6 heads need boards that support them. In most cases this means a new main board, carriage board and adapter boards, or a complete Gen6 board kit. Chinese suppliers list a Gen6 mainboard around $1,420, a sub-board around $954 and an adapter around $311, while a Hoson Gen5/Gen6 4-head kit is listed around $1,103.
Cables
Data cables and connectors may differ. Use cables specified for the new boards.
Firmware and software
The print control software must support Gen6, often requiring a newer version and possibly a licence upgrade.
Waveforms and settings
Gen6 waveforms must match the head and UV ink. Ask the ink maker whether their ink is approved for Gen6 and request settings.
Head mounting
Head mounting plates and alignment fixtures may need changes for Gen6. Check physical dimensions with the supplier.
Ink system
Dampers, filters and connectors must suit Gen6 heads and the ink flow at higher speeds.
Calibration
Full head alignment, feed calibration, density and colour profiling are needed after the upgrade.
Can the rest of the machine keep up?
Gen6’s speed advantage only matters if the machine can use it:
- Carriage motion: can the servo and mechanics run faster accurately?
- Encoder resolution: is it sufficient for higher speeds and finer drops?
- Curing: can the UV LED lamps cure ink fully at higher speeds? See our lamp cooling guide.
- Media handling: can feed and take-up systems handle the throughput?
- RIP and PC: can they process data fast enough?
On an older machine, these limits may mean you get finer drops but little extra speed.
Estimating the cost
| Item | Indicative cost (4-head machine) |
|---|---|
| 4 Ricoh Gen6 heads | About โน6.8 lakh (at ~โน1.7 lakh each) |
| Gen6 board kit | About $1,100โ2,700 depending on supplier and contents, plus shipping, duty and GST |
| Cables, adapters, dampers | Additional |
| Software or licence upgrade | Depends on system |
| Technician time and calibration | One to several days |
| Ink and media for testing | Additional |
Compare this with replacing four Gen5 heads at around โน1.25โ1.55 lakh each with no board changes.
When the upgrade makes sense
- Gen5 heads are worn and need replacing anyway.
- Customers demand finer detail for close-viewing work such as backlit displays.
- You need more speed and the machine can deliver it.
- Board system is old and needs replacing anyway.
- Gen5 heads are becoming harder to source in your area.
When it does not
- Gen5 heads are in good condition.
- Your work is mainly large-format banners viewed from a distance.
- The machine’s mechanics or curing limit speed.
- Budget is tight and Gen5 replacement heads are available.
- Local technicians lack Gen6 experience.
Alternatives to a full upgrade
- Replace worn Gen5 heads with new Gen5 or Gen5i heads.
- Optimise existing setup: better calibration, RIP settings and ink can improve quality significantly.
- Buy a new Gen6 machine and keep the Gen5 machine for suitable jobs.
Planning the upgrade
- Get a written quotation listing all boards, cables, adapters, software and labour.
- Confirm ink compatibility and settings for Gen6.
- Back up all current settings and profiles.
- Schedule downtime and a technician experienced with Gen6.
- Test thoroughly before production.
- Keep the old Gen5 boards and heads as spares or sell them.
Example: upgrade at head replacement time
A unit in Lucknow had four Gen5 heads near end of life on a 3.2 m machine. Replacement cost for Gen5 heads was significant, and their backlit work needed finer detail. After checking the machine’s motion and lamps, they upgraded to Gen6 with a new board kit. The extra cost over Gen5 replacement was justified by better quality on backlit film.
Example: upgrade not worth it
Another unit with healthy Gen5 heads considered Gen6 for speed. Their machine’s carriage and curing were already the limiting factors. They improved calibration and RIP settings instead and saved the upgrade money.
A decision checklist
| Question | If yes | If no |
|---|---|---|
| Are your Gen5 heads near end of life? | Upgrade becomes more attractive | Keep Gen5 for now |
| Do customers need finer detail? | Gen6 helps | Gen5 is adequate |
| Is speed limited by heads, not mechanics or curing? | Gen6 can add speed | Little speed gain |
| Is your board system old or unsupported? | Upgrade boards anyway | Current boards fine |
| Is Gen6 support available locally? | Lower risk | Higher risk |
| Is your ink approved for Gen6? | Proceed | Change ink too |
Count the “yes” answers. If most are yes, get detailed quotes. If most are no, replace worn Gen5 heads and revisit the question later.
Work types and head choice
| Work | Viewing distance | Gen5 adequate? | Gen6 advantage |
|---|---|---|---|
| Large banners and hoardings | Far | Yes | Speed, if machine allows |
| Backlit film for retail | Close | Usually | Finer gradients and text |
| Wallpaper and decor | Close | Usually | Smoother tones |
| Canvas art reproduction | Close | Usually | Finer detail |
| Vehicle and window graphics | Medium | Yes | Limited |
Our guide to UV roll to roll printer applications covers typical work types.
Risks during the upgrade
- Incomplete kits: missing adapters or cables delay the job.
- Licence delays: software activation can take days.
- Ink compatibility: unstable jetting if ink is not suited.
- Calibration time: longer than expected for multi-head machines.
- Technician inexperience: mistakes with new heads can be expensive.
Plan for these with a written scope, a checklist and a technician who has done Gen6 installations before.
What to do with old Gen5 parts
After upgrading, you will have Gen5 heads and boards. Options include keeping them as spares for another Gen5 machine, selling them to other users, or returning them to a supplier for credit. Used heads should be cleaned, capped with flush fluid as advised by the supplier and stored properly. Be honest about condition when selling.
Return on investment
Estimate the upgrade’s value by asking how much more work you can win or how much faster you can produce. If finer quality lets you charge more for backlit work, or extra speed lets you take more jobs per day, calculate the monthly benefit and compare with the extra cost over Gen5 replacement. Many owners find the payback is good only when the upgrade coincides with necessary head replacement.
Step-by-step upgrade process
- Assessment: technician inspects machine mechanics, encoder, motion, lamps, ink system and current board system.
- Specification: agree head count, colour layout, white and varnish, board kit, cables and software.
- Quotation: get a written, itemised quote including labour and calibration.
- Ink confirmation: confirm ink suitability and get Gen6 settings from the ink maker.
- Preparation: back up settings, profiles and records; schedule downtime.
- Removal: remove Gen5 heads, boards and cables carefully; store properly.
- Installation: fit new boards, cables, adapters, head mounts and Gen6 heads with power off.
- Software: install software, update firmware and activate licence.
- Settings: enter head voltages, waveforms and temperatures.
- Priming and checks: prime heads, run nozzle checks.
- Calibration: alignment, bidirectional, feed and density.
- Profiling: create new colour profiles for main media.
- Production testing: run real jobs before full production.
Lamp and curing implications
If Gen6 lets you print faster, each area of ink receives less UV exposure per pass. If lamps are already working near their limit, faster printing may lead to under-curing. Check curing at your target speeds with adhesion tests. You may need higher-power lamps or to run at moderate speeds. See our guide to UV curing problems.
Electrical considerations
A Gen6 board kit and heads may have different power requirements from Gen5. Check power supply ratings and wiring. If you are also upgrading lamps, recheck total machine load, stabiliser capacity and chiller capacity. Our guide to power fluctuation and earthing covers sizing.
Training operators
Gen6 settings, waveforms and print modes may differ from Gen5. Train operators on new modes, maintenance and settings. Gen6 heads are expensive, so careful handling and cleaning procedures are essential from day one.
Gen5i as a middle path
Ricoh Gen5i heads are an updated version of Gen5, listed in India at around โน1.3 lakh to โน1.75 lakh. They often work with compatible Gen5 boards, though settings and compatibility should be confirmed with your board supplier. For owners whose Gen5 heads are worn but who do not want a full Gen6 upgrade, Gen5i can be a sensible middle path. Our guide to Ricoh Gen5i printhead prices in India covers current pricing.
Questions to ask the upgrade supplier
- Which exact boards, adapters and cables are included?
- Are head mounts and dampers compatible, or are new ones needed?
- Which software version and licence are required, and at what cost?
- How many Gen6 upgrades have your technicians completed?
- What waveforms and settings will be used for my ink?
- What warranty covers the heads and boards?
- How long will the machine be out of production?
Clear answers reduce surprises and help you compare suppliers fairly.
Testing Gen6 before committing
If possible, see a machine similar to yours running Gen6 heads with your type of ink and media. Ask the supplier for sample prints of your own files at the speeds you would use. Compare fine text, gradients and solid areas with your current Gen5 output under the same lighting. Real samples are far more useful than specification sheets when deciding whether the upgrade will satisfy your customers.
Head handling during the upgrade
New Gen6 heads should stay sealed until the moment of installation. Handle them by the body, never the nozzle plate or connector, wear gloves, and keep them away from dust and static. Fill and prime them exactly as the supplier instructs, and avoid wiping the nozzle plate with anything other than approved materials. The first days after installation are when careless handling does the most damage.
Bottom line
A Ricoh Gen5 to Gen6 upgrade is a significant project that touches heads, boards, software, ink, lamps and calibration. It can bring real benefits for close-viewing, high-quality work, especially when Gen5 heads are due for replacement anyway. But for many machines, especially those limited by mechanics or curing, replacing Gen5 heads and improving calibration offers better value. Decide with facts, a full quote and an experienced technician.
Further reading: Both generations are piezo drop-on-demand heads; see this overview of inkjet printing for background.
Key takeaways
- A Ricoh Gen5 to Gen6 upgrade requires boards, cables, software, waveforms and calibration, not just new heads.
- Gen6 offers smaller drops and higher frequency, but the machine must be able to use them.
- The upgrade makes most sense when Gen5 heads are worn and customers need finer detail or speed.
- Get a full written quotation and confirm ink compatibility.
- Replacing Gen5 heads is often better value for machines with mechanical limits.
More in the UV main board series
- UV Roll to Roll Main Board: Functions and Ports
- UV Main Board Failure Symptoms
- BYHX vs Hoson vs Senyang Main Boards for UV
- UV Main Board Firmware Update Guide
- UV Printer Connection Problems: USB, Network, Fibre
- UV Main Board Replacement: Dongle, RIP Licence, Settings
- UV Printer Surge and Lightning Protection
- UV Roll to Roll Main Board Price in India
- Used UV Roll to Roll Printer Electronics Check
Related reading on our site: UV roll to roll printer price in India, Ricoh Gen5 vs Gen5i printheads, UV LED lamp and module replacement checks, UV curing problems: lamp, ink and power checks and white ink circulation engineering.
Also running solvent or eco-solvent machines? See our sister guides to the solvent flex machine main board and the eco-solvent printer main board.
Frequently Asked Questions
Can I fit Ricoh Gen6 heads on my Gen5 machine?
Not without changing boards, cables, software and settings. Gen6 heads need Gen6-compatible electronics.
How much does a Gen5 to Gen6 upgrade cost?
For a four-head machine, heads alone cost about โน6.8 lakh at โน1.7 lakh each, plus boards, cables, software and labour.
Is Gen6 faster than Gen5?
Gen6 supports higher firing frequencies, but actual speed depends on the machine’s motion, encoder, curing and media handling.
Does Gen6 give better print quality?
Gen6’s smaller minimum drop can improve fine detail, especially for close-viewing work.
Do I need new ink for Gen6?
Ask your ink maker whether the ink is approved for Gen6 and request recommended settings.
Can I keep my Gen5 boards as spares?
Yes, if you keep Gen5 heads for another machine. Otherwise, consider selling them.
Which board systems support Gen6?
BYHX and Hoson offer Gen6 systems in some versions. Confirm the exact version with your supplier.
How long does the upgrade take?
Installation and calibration typically take one to several days, depending on machine and technician.
Is Gen5i a cheaper alternative?
Gen5i heads are an alternative for Gen5 machines and usually work with compatible Gen5 boards. Check with your supplier.
Will the upgrade affect my warranty?
It may. Check with your machine supplier before upgrading.
Should I buy a new Gen6 machine instead?
If your machine is old or has mechanical limits, a new Gen6 machine may be a better long-term investment.
Can Unified Engineering Dynamics help plan a Gen6 upgrade?
Yes. Our team can advise on heads, boards and compatibility for UV roll to roll printers.
Is Gen6 worth it for banner printing?
Usually not, unless you need extra speed and your machine can deliver it. Banners are viewed from a distance where Gen5 quality is adequate.
What can I do with old Gen5 heads after upgrading?
Keep them as spares for another Gen5 machine, sell them, or return them to a supplier for credit, after proper cleaning and storage.
Do I need new lamps for a Gen6 upgrade?
Not always. If you print faster, check curing at target speeds. Under-curing may require higher-power lamps or moderate speeds.
Do operators need training after a Gen6 upgrade?
Yes. Settings, print modes and maintenance may differ, and careful handling protects expensive new heads.
Is Ricoh Gen5i an alternative to upgrading to Gen6?
Yes. Gen5i heads often work with compatible Gen5 boards and can be a middle path when Gen5 heads are worn. Confirm compatibility with your board supplier.
Can I see Gen6 results before upgrading?
Ask the supplier for sample prints of your own files on similar machines, ink and media, and compare them with your current output.