Eco Solvent Printing

Hoson vs Senyang vs BYHX Carriage Boards: Compatibility for i3200 and XP600 Machines

Carriage Board Compatibility: Hoson vs Senyang vs BYHX

Direct answer: Hoson, Senyang and BYHX are the three board-system brands you will meet most often in Chinese-built eco-solvent printers sold in India. Each brand makes complete control kits: a mainboard, a carriage (head) board, sometimes adapter boards, plus its own firmware and print control software. A carriage board is only compatible inside its own kit family and version. You cannot normally fit a Senyang carriage board to a Hoson mainboard, and even within one brand the carriage board must match the head type (i3200, XP600, DX5 and so on), the number of heads, the mainboard generation and the firmware. When replacing a board, match brand, model, version and head count exactly, or plan a complete kit change with matching software.

Getting carriage board compatibility right is the difference between a quick repair and a board that never talks to your machine.

Carriage Board Compatibility: Hoson vs Senyang vs BYHX
Carriage Board Compatibility: Hoson vs Senyang vs BYHX

This article explains how the three systems differ in practice, what “compatibility” really means for a carriage board, and how to choose when you are repairing, replacing or upgrading. If you need background on what the carriage board does, read our explainer on the eco-solvent head carriage board first.

Why board brand matters more than printer brand

Many eco-solvent printers sold in India carry the name of the importer, distributor or a Chinese assembler. Underneath, machines from different brands may share the same frame, the same heads and the same board system. When it comes to electronics spares, the board brand and version usually tell you more than the name on the printer’s side panel.

That is why a supplier will ask you for a photo of the board rather than just the printer name. Two printers sold under the same badge can have different board systems if they were built in different years, and two printers with different badges can take the same board. Our guide on identifying spares by model and part number explains how to document what is actually installed.

A quick profile of the three systems

The descriptions below reflect what is generally seen in the Indian eco-solvent market. Product lines change frequently and each brand offers many versions, so treat this as orientation, not a specification sheet.

Hoson

Hoson board kits are very widely used in Epson-head eco-solvent, DTF and small UV printers. They are available for XP600, i3200, i1600, DX5, DX7 and other heads, in single-head, double-head and multi-head configurations. Many recent Hoson kits use a network (Ethernet) connection between PC and mainboard, and some versions offer USB. Because Hoson is so common, spares, technicians familiar with the system and second-hand boards are relatively easy to find. The flip side is that there are many versions in circulation, which makes careful version matching essential.

Senyang

Senyang board kits are commonly found in entry-level and mid-range XP600 and i3200 machines, including many eco-solvent and DTF printers. They are often chosen by machine builders for cost reasons. Senyang systems have their own firmware and print control software, and spares are reasonably available in India through printer parts suppliers. As with Hoson, there are multiple generations, and boards from different generations may not work together.

BYHX

BYHX is well known in industrial solvent and UV printers with Konica Minolta, Ricoh and Kyocera heads, and also produces systems for Epson heads including i3200 and DX5. You are more likely to find BYHX in higher-end or larger-format machines, though some eco-solvent machines use it too. BYHX systems tend to be priced higher and are often tied closely to the machine manufacturer’s configuration, so replacement boards may need to come through the machine supplier.

What carriage board compatibility really means

When a seller says a carriage board is “compatible with i3200”, that is only one of several conditions. For a carriage board to work correctly and safely, all of the following must match:

Compatibility factorWhat to matchWhat happens if it does not match
Board brandSame brand as mainboard (Hoson with Hoson, etc.)No communication; boards do not recognise each other
Kit generation and versionCarriage board version that the mainboard and firmware supportCommunication errors, head not detected, firmware refusal
Head typeBoard built for your exact head (i3200-E1, i3200-A1, XP600, DX5 etc.)Head not recognised, wrong waveform, possible head damage
Number of headsBoard channels matching installed heads (1, 2, 3, 4 head versions)Missing heads or need for kit change
Data link typeSame link as mainboard (cable type, network, fibre where used)Cannot connect without changing mainboard or cables
Connectors and adapter boardsSame connector layout, head cables and adapter cardsNeed for new cables or adapters; risk of wrong insertion
Firmware and softwareFirmware and print control software version supported by the board pairBoard not detected or features missing
Licence or lockBoard authorisation tied to the machine or software where applicableBoard works only after activation by the supplier or manufacturer
Mechanical fitMounting holes, size and orientation in the carriage housingBoard will not fit or cables are stressed

i3200 versions and why they matter

Epson i3200 heads come in variants intended for different ink types, commonly referred to as i3200-E1 for eco-solvent, i3200-A1 for water-based and DTF, and i3200-U1 for UV. Physically they look very similar, and the board-level drive requirements are closely related, but board makers may offer specific versions or settings for each. For an eco-solvent machine, make sure the head is the eco-solvent variant and that the board and software are set up for it. Fitting a head intended for water-based ink into an eco-solvent machine is a head and ink compatibility problem, regardless of the board. Our article on XP600 vs i3200 printheads covers the head side of this decision.

Some i3200 setups use small adapter or transfer boards between the carriage board and the head. These are cheap parts, but they must be the correct type for the board system, and they are a common failure point when ink gets into the area. Keep a spare if your system uses them.

XP600 boards: the most common and the most varied

XP600 has been the workhorse head for entry-level eco-solvent printers for years, so XP600 carriage boards exist in many brands and versions. Older machines may run older board generations that are no longer produced, which means the exact replacement may be available only as old stock, second-hand or refurbished. In such cases, a complete kit upgrade to a current XP600 or i3200 system can sometimes be more reliable than chasing an obsolete board, a point we explore in our article on single-head to double-head carriage board upgrades.

Head-to-head comparison for buyers

The table below compares the three systems from the point of view of an Indian eco-solvent shop owner. It is a general guide; specific board versions, supplier support and pricing vary.

FactorHosonSenyangBYHX
Where commonly foundWide range of eco-solvent, DTF and small UV printersEntry and mid-range XP600 and i3200 machinesIndustrial and higher-end machines; some eco-solvent
Head supportBroad Epson range, many head countsMainly XP600, i3200, some othersEpson and industrial heads
Spare availability in IndiaVery goodGoodModerate; often via machine supplier
Technician familiarityHighMedium to highMedium; specialist
Relative priceMidLower to midHigher
Version varietyVery many versions; careful matching requiredSeveral generationsOften customised per manufacturer
Machine lockingVaries by machine builderVariesMore often tied to manufacturer configuration

No system is “best” in every case. The best system for your machine is usually the one it was built with, provided spares and support are available. Changing systems makes sense mainly when the current one is obsolete, unsupported or limiting your production.

Board locking, authorisation and manufacturer software

Some machine manufacturers customise the board firmware or use board authorisation so that only their software, settings or spares work with the machine. You may see this as a board that is physically identical to the original but refuses to work until it is activated, or software that needs a password to access head settings. This is common practice and not necessarily bad, as it lets the manufacturer control quality and support. It does mean that buying a carriage board from the open market may not work without the manufacturer’s help.

Before buying a replacement from a third party, ask your machine supplier whether the board is locked or needs authorisation, and whether they will support activation. Also ask what happens to your warranty and service agreement if you fit a board from another source. Our guide to printing machine warranty and AMC contracts explains which questions to ask.

Genuine, clone and refurbished boards

For popular systems you will find genuine new boards, refurbished or repaired boards, and in some cases copies. Price differences can be large. Points to consider:

  • Genuine new boards from a reliable supplier offer the best chance of correct version, stable performance and some warranty.
  • Refurbished or repaired boards can be good value if the supplier tests them with the correct heads and offers a short warranty. Ask what was repaired and how it was tested.
  • Copies or unbranded boards may work, but there is a higher risk of version mismatch, unstable operation and lack of support. If something goes wrong, a cheap board can damage expensive heads.

Our article on genuine vs compatible eco-solvent parts lists the verification steps that apply equally to boards.

Replacing like-for-like vs changing the whole kit

When a carriage board fails, you usually choose between two paths.

Like-for-like replacement

Buy the same brand, model and version, fit it, set the head voltage and parameters, and calibrate. This is the fastest and cheapest route when the board is available. It keeps your existing software, settings and ICC profiles. The risk is low if the version is truly identical.

Complete kit change

Replace the mainboard, carriage board, data cables, adapter boards and software together, possibly with a different brand or head type. This is needed when the original board is obsolete, when you want to change head type (for example XP600 to i3200), or when you want a different head count. It involves more cost, more downtime for installation and calibration, and new RIP and colour profiles. It can, however, give the machine a longer life and better performance. Our guide to keeping an older printer running and upgrade decisions discusses when this investment is worthwhile.

SituationRecommended route
Board failed, exact version available, machine in good conditionLike-for-like replacement
Board obsolete, only uncertain second-hand stock availableConsider complete kit change
Want to move from XP600 to i3200 for speed or durabilityComplete kit change with heads
Want to add a second head on a single-head kitUsually new carriage board, often new mainboard or kit
Machine is old with worn mechanicsWeigh kit cost against a new machine

How to identify your current board system

With the machine switched off and unplugged, open the carriage cover and electronics compartment and look for:

  1. Brand name or logo printed on the board (Hoson, Senyang, BYHX or others).
  2. Board model or part number printed on the board or on a sticker.
  3. Version or date code labels, often small stickers near the processor or connector.
  4. The type and number of head connectors and any adapter boards.
  5. The type of data cable between mainboard and carriage board.

In the print control software, check the “about” or “version” section for firmware and software versions, and note the head type and head count shown. Photograph everything. With this set of photos and information, a good supplier can tell you exactly which carriage board you need or whether a kit change is required.

Questions to ask before buying a carriage board

  • Is this board the same brand, model and version as my current board? Can you confirm from my photos?
  • Does it support my exact head type and head count?
  • Does it need a specific firmware version, and will you provide it?
  • Is it new, refurbished or repaired? How was it tested, and with which heads?
  • Does it need activation or authorisation, and who will do it?
  • Does the price include adapter boards and cables if needed?
  • What is the warranty period and what does it exclude (ink damage, wrong installation, surges)?
  • Will someone help with installation, voltage setting and calibration?

Comparing suppliers on these points rather than on price alone avoids costly mistakes. See our guide to comparing spare parts suppliers and service for a fuller checklist.

Common mistakes we see

  • Ordering by head name only: “i3200 head board” is not enough. Brand, version and head count must match.
  • Mixing brands: trying a cheaper Senyang carriage board on a Hoson mainboard, or the reverse.
  • Ignoring firmware: fitting a newer carriage board without the firmware or software update it needs.
  • Skipping voltage settings: powering a new board and head without entering the correct head voltage values.
  • Assuming a used board is good: buying untested boards from a scrapped machine, which may have the same fault that killed the original machine.
  • Not fixing the cause: replacing the board without checking for ink leaks, shorted heads or power problems.

Further reading: For a general explanation of the role firmware plays in electronic devices, see this article on firmware.

Key takeaways

  • Hoson, Senyang and BYHX each make complete board kits; carriage boards work only within their own brand and compatible version.
  • Match brand, version, head type, head count, data link, firmware and any authorisation before buying.
  • Hoson offers the widest availability, Senyang is common in cost-focused machines, and BYHX is more common in industrial and higher-end systems.
  • Like-for-like replacement is fastest; a complete kit change makes sense for obsolete boards or head upgrades.
  • Photograph your boards and software versions before contacting suppliers, and always fix the cause of the original failure.

If you are unsure which board system your printer uses, or whether a replacement or upgrade is the right choice, the Unified Engineering Dynamics team can help identify the exact board and plan the change for your eco-solvent machine.

More in the head carriage board series

Related: our fire board series explains the firing circuit that drives the heads, starting with What Is a Fire Board?, plus fire board failure signs and head voltage settings.

Related: our main board series covers main board functions and failure points, main board failure symptoms, the main board replacement checklist and how lightning, surges and earthing faults damage main boards.

For a system-wide view, see our complete guide to eco-solvent printer electronics, our step-by-step electronics fault isolation guide and the monthly electronics maintenance checklist.

Frequently Asked Questions

Can I fit a Hoson carriage board on a Senyang mainboard?

No. Carriage boards and mainboards from different brands use different data protocols and software, so they do not work together. If you want to change brand, you need a complete kit change.

Is an XP600 Hoson head board the same for all printers?

No. Hoson has many versions of XP600 boards. The version, head count, connectors and firmware must match your mainboard and printer. Always confirm with a photo of your current board.

Which board system is best for an i3200 eco-solvent printer?

The best choice is usually the system your machine was designed with, provided spares and support are available locally. Hoson is the most widely supported in India; Senyang is common in cost-focused machines; BYHX appears more in industrial systems.

Why does my new carriage board not work even though it is the same brand?

Common reasons include a different board version, missing firmware update, wrong head type setting, board authorisation required by the machine manufacturer, or a wrongly seated cable.

Are refurbished carriage boards safe to use?

They can be, if the supplier has tested them with the correct heads and offers a warranty. Avoid untested boards from scrapped machines, because the original fault may still be present.

Do I need new RIP profiles after a board change?

Not for a like-for-like replacement, although recalibration is still needed. For a complete kit change or head change, new settings, calibration and colour profiles are usually required.

author-avatar

About Avinash Sharma

Avinash Sharma is the founder of Unified Engineering Dynamics (UED), an industrial digital printing machine supplier and engineering consultancy based in Uttar Pradesh, India. He works hands-on with flex printers, eco-solvent printers, UV flatbed and hybrid printers, DTF and sublimation machines, CO2 lasers and CNC routers - from installation and operator training to cost-per-print economics for new printing plants. His guides help first-time buyers across India choose the right machine for their budget, products and city, with honest setup costs and maintenance realities.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *