Direct answer: Hoson, Senyang and BYHX each supply complete control kits for eco-solvent printers: a main board, a matching carriage (head) board, cables and their own firmware and print control software. The main board decides much of what the machine can do: which heads and head counts it supports, how it connects to the PC, which software and RIPs it works with, and how easy it is to find spares and technicians. For most Indian shops, Hoson offers the widest head support and the best local spare and technician availability; Senyang is common in cost-focused XP600 and i3200 machines and is reasonably well supported; BYHX is more often found in industrial and higher-end machines, typically priced higher and closely tied to the machine manufacturer. The best kit for your printer is usually the one with reliable local support for your exact head configuration, rather than the one with the longest feature list.
Choosing a main board kit decides which carriage boards, heads, software and spares your machine can use for years.

Table of Contents
This guide compares the three systems from the main board perspective, for shop owners choosing a new machine, replacing a failed board, or planning a kit upgrade. Our earlier article on Hoson vs Senyang vs BYHX carriage boards covers the carriage board side; this article focuses on the main board and the kit as a whole.
Why the main board defines the main board kit
In a board kit, the main board is the anchor. It determines:
- Which carriage boards can be connected, and therefore which heads and head counts are possible.
- How the PC connects: network, USB, or both.
- Which firmware generation runs, and which print control software version is needed.
- Which RIP software drivers are available for the configuration.
- How motors, heaters and sensors are controlled, which affects compatibility with the machine’s mechanics.
- Whether the machine can be upgraded later without changing the main board.
So when you compare board systems, compare main boards first, then check the carriage boards and software that go with them.
Overview of the three systems
The descriptions below reflect what is generally seen in the Indian eco-solvent market. Each brand offers many models and versions that change over time, so confirm the details for the exact board version you are considering.
Hoson
Hoson main boards are widely used in Epson-head eco-solvent, DTF and small UV printers. Hoson kits cover XP600, i3200, i1600, DX5, DX7 and other heads, in single, double and multi-head versions, and many current kits use network connection to the PC. Because the system is so widespread, technicians across India are familiar with it, spare boards are relatively easy to find, and second-hand or refurbished boards are available. The main challenge is the large number of versions in circulation, which makes careful version matching essential.
Senyang
Senyang main boards are common in entry-level and mid-range machines, particularly XP600 and i3200 eco-solvent and DTF printers. Machine builders often choose them for cost reasons. They come with their own firmware and print control software. Spares are reasonably available through Indian parts suppliers, and many technicians can service them, though familiarity is generally a little lower than with Hoson.
BYHX
BYHX is well known for industrial printers with Konica Minolta, Ricoh and Kyocera heads, and also offers systems for Epson heads such as i3200 and DX5. BYHX main boards are more common in higher-end or larger machines. They tend to be priced higher and are often customised or locked by the machine manufacturer, so spares and support usually come through the machine supplier.
Comparison for Indian shop owners
| Factor | Hoson | Senyang | BYHX |
|---|---|---|---|
| Typical machines | Wide range of eco-solvent, DTF, small UV | Entry and mid-range XP600 and i3200 | Industrial, higher-end; some eco-solvent |
| Epson head support | Very broad | Main popular heads | Selected Epson heads plus industrial heads |
| Head count options | Single to multi-head | Mainly single to few heads | Wide, especially multi-head |
| Spares availability in India | Very good | Good | Moderate, mostly via machine supplier |
| Technician familiarity | High | Medium to high | Specialist |
| Relative cost | Mid | Lower to mid | Higher |
| Version variety | Very high | Several generations | Often customised |
| Manufacturer locking | Varies | Varies | More common |
Head support and future upgrades
If you may want to upgrade later, for example from one head to two, or from XP600 to i3200, the main board’s support matters. Questions to ask:
- Does this main board support more heads than currently installed?
- Is there a carriage board option for a different head type with the same main board?
- Is the board a current generation with ongoing firmware support?
- Does the manufacturer lock head count or head type through authorisation?
A main board that supports two heads, with a single-head carriage board installed, can make a later upgrade cheaper. A main board that only supports one head type and count means a full kit change for any upgrade. Our article on single to double head upgrades explains how this works.
PC connection and software
Main boards connect to the PC through network, USB or both. Network connections are common in current kits and can be more robust over longer distances, but need correct IP settings. USB connections are simple but sensitive to cable length, port quality and Windows power settings. Each board system has its own print control software, and the version must match the firmware. Most systems work with common RIPs such as Maintop and PhotoPrint, but check that your RIP version has a driver for your board and head configuration. When comparing kits, ask:
- Which connection type does this main board use?
- Which print control software version comes with it, and is it in English and easy for operators to use?
- Which RIP software and versions are supported for this configuration?
- Is there a licence or dongle requirement for the print control software or RIP?
Motion, heaters and machine integration
The main board must suit the machine’s motors, encoders, heaters and sensors. Machine builders integrate the board with their mechanics and set parameters accordingly. This is why a main board from one machine may not run another machine correctly, even within the same brand. If you are replacing a main board, use the same model and version as the original, or get the machine supplier to confirm the replacement and provide the correct parameters.
Firmware support and long-term availability
Board makers release new firmware to fix problems, add head support and improve performance, and eventually stop supporting older board generations. A main board that is still in production and actively supported will be easier to replace and update over the next several years. Ask your supplier how long the board model has been on the market, whether newer generations have replaced it, and whether firmware updates are still released for it. Buying a machine on a board generation that is about to be discontinued can leave you with expensive or hard-to-find spares later.
Spares, support and downtime
For most shops, downtime cost is the most important factor. A main board that is cheaper but takes two weeks to arrive can cost more than an expensive board available the same day. Consider:
- How quickly can a replacement main board be obtained in your city?
- Are there technicians nearby who know the system?
- Does your machine supplier hold stock of boards for your model?
- Can boards be repaired locally if needed?
Hoson’s wide adoption gives it an advantage in many Indian cities. Senyang is also widely available. BYHX support depends heavily on your machine supplier. Our guide to comparing spare parts suppliers helps evaluate support.
Choosing a board kit when buying a new machine
When buying a new eco-solvent printer, the board kit is part of the decision. Practical advice:
- Ask which board brand, main board model and carriage board are installed.
- Ask whether the board is locked by the manufacturer, and how spares will be supplied.
- Ask about upgrade options for heads and head count.
- Ask which print control software and RIP are included, and whether licences are transferable.
- Ask local technicians and other shop owners about their experience with that board system.
- Check that the supplier can provide spares quickly in your city.
Our guide to eco-solvent printer prices in India and the article on i3200 printer prices cover the wider buying decision.
Changing board brand on an existing machine
Sometimes owners consider changing from one board system to another, for example when the original board is obsolete or unsupported. This is a complete kit change: main board, carriage board, data cables, head cables, adapter boards, firmware, software and often RIP drivers. The machine’s motors, encoders, sensors and heaters must be compatible with the new main board, and parameters must be set from scratch. It is a significant job that should be planned with an experienced technician. It can extend the life of a machine with good mechanics, but compare the cost with a newer machine before deciding. Our article on keeping an older printer running discusses this trade-off.
Cost beyond the board price
When comparing kits, the price of the main board itself is only part of the cost. Over the life of the machine, the total cost of a board system includes replacement boards, technician visits, downtime while waiting for parts, software licences and RIP drivers, and the time operators spend learning and working with the software. A system with slightly higher board prices but faster local support and fewer service visits can be cheaper overall. Ask other shop owners in your area how often their boards fail, how long replacements take and how responsive support is. These real-world experiences are often more useful than any specification sheet. Our carriage board price guide gives a feel for spare part costs.
Which kit suits which shop?
| Shop profile | Typical suitable choice | Reason |
|---|---|---|
| Small shop, single XP600 or i3200 machine, budget-focused | Senyang or Hoson | Lower cost, adequate support |
| Growing shop, double i3200, wants easy service | Hoson | Wide technician familiarity and spares |
| Shop in a smaller town with limited service options | Whichever system local technicians know best | Downtime matters more than features |
| Production house with higher-end or multi-head machines | Machine supplier’s system, often BYHX or Hoson | Integrated support from manufacturer |
| Owner planning future head upgrades | System with confirmed upgrade path on the same main board | Lower upgrade cost later |
Software usability and operator training
The main board comes with its print control software, and your operators use it every day. Usability matters more than many buyers expect. Before choosing a machine or kit, ask for a demonstration of the software and check:
- Is the interface clear and available in English?
- Are nozzle checks, cleaning, head alignment and feed calibration easy to run?
- Are error messages understandable, and is there documentation?
- Can settings and parameters be backed up and restored easily?
- Are head voltage and advanced settings password-protected, to prevent accidental changes?
- Will the supplier train your operators on the software?
A system that your operators understand well leads to fewer mistakes, better maintenance and fewer service calls, which can matter more than small differences in hardware.
Checking the board system on a second-hand machine
When buying a used printer, the board system affects future costs. Identify the main board brand, model and version, check whether the board is current or obsolete, and ask whether the software licence and any dongle are included and transferable. Check whether the board is locked to a manufacturer that still supports it. A used machine on an obsolete or unsupported board may be cheap to buy but expensive to keep running. Our article on checking the main board before buying a second-hand printer, and our second-hand eco-solvent printer checklist, cover the full inspection.
Questions to ask a seller about the main board
- Which brand, model and version is the main board, and can you show me the label?
- Which carriage boards and heads does this main board support?
- Is the firmware current, and will updates be provided?
- Is the board locked, and how will replacement boards be supplied and activated?
- How long would a replacement main board take to arrive in my city, and roughly what would it cost?
- Which technicians in my area are trained on this system?
- What warranty applies to the main board, and what does it exclude?
Clear answers to these questions are a good sign of a supplier who will support you after the sale.
Common mistakes
- Choosing a machine without asking which board system it uses.
- Buying a replacement main board by brand only, without matching the version.
- Assuming any Hoson main board works with any Hoson carriage board.
- Ignoring manufacturer locking until a third-party board refuses to work.
- Changing board brand without budgeting for cables, software, RIP drivers and setup time.
- Not keeping parameter backups, making any board change harder.
Further reading: Long-term firmware support is one of the less visible but most important differences between kits.
Key takeaways
- The main board anchors the kit and defines head support, PC connection, software and upgrade options.
- Hoson offers the widest support in India, Senyang is common in cost-focused machines, and BYHX is more common in industrial and higher-end systems.
- Local spares and technician availability usually matter more than feature differences.
- Replace main boards like-for-like with matching version, or plan a full kit change with expert help.
- When buying a machine, ask about the board system, locking, upgrades and software before you decide.
The Unified Engineering Dynamics team can help you identify your current board system, compare kit options for replacement or upgrade, and source the correct main board for your eco-solvent printer.
More in the main board series
This article is part of our series on eco-solvent printer main boards. Continue with the other guides:
- Eco-Solvent Printer Main Board: Functions, Ports and Common Failure Points
- Main Board Failure Symptoms: No Connection to PC, Carriage Not Moving, Error Codes
- Main Board Firmware Updates: When to Update, Risks and Backup Steps
- Board Kit Upgrade: Converting an XP600 Printer to i3200 (Main + Head Board Changes)
- Network Port and USB Problems on Main Boards: Faults Operators Can Fix Themselves
- Main Board Replacement Checklist: Dongle, Software Licence, Maintop/PhotoPrint Settings
- Lightning, Surges and Earthing Faults: Why Main Boards Die in Monsoon Season
- Eco-Solvent Main Board Price in India: XP600, i3200, DX5 Kits Compared
- Buying a Second-Hand Eco-Solvent Printer? How to Check the Main Board and Electronics
Related: our head carriage board series starts with the head carriage board explained, and our fire board series starts with what a fire board is and what it does. For a side-by-side view of all three boards, read fire board vs head board vs mainboard.
For a system-wide view, see our complete guide to eco-solvent printer electronics, our step-by-step electronics fault isolation guide and the monthly electronics maintenance checklist.
Frequently Asked Questions
Which is better: Hoson, Senyang or BYHX main board?
It depends on your machine and location. Hoson has the widest support in India, Senyang is common in cost-focused machines, and BYHX is more common in higher-end systems. Local spares and technician support usually matter most.
Can I replace a Senyang main board with a Hoson main board?
Only as part of a complete kit change, including carriage board, cables, firmware and software, with the machine reconfigured. Mixing brands between main board and carriage board does not work.
Does the main board decide how many heads I can use?
Largely, yes. The main board and its firmware support a certain range of head types and counts, and the carriage board must match.
Do all board systems work with Maintop and PhotoPrint?
Most common systems are supported by popular RIPs, but check that your RIP version has a driver for your specific board and head configuration.
What is manufacturer locking?
Some machine makers customise or lock the board so that only their boards, software or settings work. Replacement boards may need activation by the manufacturer.
Should I choose a machine based on its board system?
It should be one of the factors. Ask which system is used, how spares are supplied, and whether local technicians support it.