Direct answer: When buying a second-hand eco-solvent printer, the electronics can be as costly as the printheads if they fail, so check them carefully. Identify the main board and carriage board brand, model and version, and confirm they are still supported and not locked to a manufacturer that no longer supplies parts. Make sure the print control software, RIP licence and any dongle are included and transferable. Inspect the electronics compartment for dust, ink contamination, burnt marks, swollen capacitors, loose or modified wiring, and signs of repair. Then run the machine for at least an hour: connect from a PC, print nozzle checks and real jobs at different speeds and widths, check heaters, sensors, motion and network stability, and watch for errors, restarts or overheating. Ask for service history, especially surge damage and board replacements. If the seller will not allow a proper test, treat that as a serious warning sign.
A careful electronics check takes an hour or two and can save you from buying a machine you cannot keep running.

Table of Contents
This guide focuses on the electronics. For the full inspection including mechanics, heads and ink system, see our second-hand eco-solvent printer buying checklist. This article is part of our main board series.
Why electronics matter in a used printer
Buyers often focus on printheads and print quality, which is sensible, but the electronics determine whether the machine can be kept running. A used printer with obsolete or locked boards may print well on the day of purchase but become very expensive or impossible to repair when a board fails. Electronics problems also cause the hardest-to-diagnose faults: intermittent errors, connection drops and random restarts. A careful electronics check protects you from buying someone else’s recurring problem.
Step 1: Gather information before visiting
Ask the seller for:
- Machine brand, model, width, year of purchase and serial number.
- Head type and count, and when heads were last replaced.
- Main board and carriage board brand and model.
- Print control software and RIP software, with licence details.
- Service history: repairs, board replacements, surge or water damage.
- Reason for selling.
- Whether original invoices, manuals and installation records are available.
Check whether the machine maker or board supplier is still active and supporting this model. A quick call to a supplier can tell you whether boards are still available.
Step 2: Identify the boards on site
With the machine switched off and disconnected, ask the seller or your technician to open the electronics compartment. Photograph the main board and carriage board, including labels and connectors. Record:
| Item | What to check |
|---|---|
| Main board brand, model, version | Label or printed markings; compare with seller’s information |
| Carriage board model and head count | Matches the installed heads |
| Firmware and software versions | From print control software “about” screen |
| Lock status | Ask the seller and verify with the supplier if possible |
| Board generation | Current, older but supported, or obsolete |
Our article on main board kit brands explains why the board system matters for long-term support.
Step 3: Visual inspection of the electronics
Have your technician inspect, without touching live parts:
- Dust and debris: heavy dust suggests poor maintenance and possible overheating.
- Ink and solvent contamination: ink stains or residue on boards, cables or connectors indicate leaks that may cause future faults.
- Burnt marks or discolouration on boards, connectors or terminal blocks.
- Swollen or leaking capacitors on boards and the power supply.
- Corrosion on connectors and terminals, especially in machines from humid locations.
- Modified wiring: joints, tape, non-standard connectors or bypassed fuses.
- Signs of board repair: resoldered areas or replaced components; ask what was repaired.
- Fans and filters: working fans, clean or replaceable filters.
- Cable chain and carriage cables: wear, kinks or damage.
Any of these findings is not necessarily a deal breaker, but each should be explained and reflected in the price.
Step 4: Power supply and earthing at the test site
Test the machine on a supply with proper earthing and stable voltage. A machine that shows errors on a poor supply may be fine on a good one, and a machine that works on a perfect supply may struggle in your shop. Ask what supply and protection the seller used: stabiliser, UPS, earthing. A history of running without protection increases the risk of hidden surge damage. Our earthing and power guide explains why this matters.
Step 5: Connection and software test
- Connect a PC with the print control software, ideally your own laptop configured with the correct settings, to test that the machine works with a different PC.
- Check that the connection is established quickly and remains stable.
- Check the firmware version and machine parameters.
- Check the head type and head voltage settings against the head labels.
- Open the RIP and send a job; confirm the RIP licence and dongle work.
If the software only runs on the seller’s PC, ask whether the PC, dongle and licence are included in the sale.
Step 6: Functional and print test
Run the machine for at least one hour, ideally longer, to reveal heat-related faults. During the test:
- Run initialisation, cleaning and nozzle checks; nozzles should be complete or nearly so.
- Print real jobs at different speeds and print modes.
- Print at full width to test the carriage cable chain and cables at the extremes.
- Print a long job to test feed, heaters and stability over time.
- Check heaters reach and hold set temperatures.
- Trigger sensors: media sensor, cover sensor, origin.
- Watch for errors, connection drops, restarts or unusual noises.
- Check the electronics compartment temperature and fans after the long run.
Record any errors with photos. Our guide on nozzle checks helps evaluate heads, and our article on main board failure symptoms helps interpret electronics errors.
Step 7: Software licence and dongle transfer
Software is often overlooked in used machine sales. Clarify:
- Is the print control software included, and is it the correct version for the board?
- Is the RIP licence included, and is it transferable to you?
- Is there a dongle, and will it be handed over?
- Are installation files available?
- Are there activation codes or online accounts that need transfer?
Buying a RIP licence separately can add a significant cost. Without the correct print control software, the machine may not work at all.
Electronics red flags
| Red flag | Why it matters |
|---|---|
| Seller will not allow opening the electronics compartment | May be hiding damage or repairs |
| Seller will not allow a long test | Heat-related faults may only appear after running |
| Obsolete or unsupported main board | Future repairs may be impossible or expensive |
| Board locked to an inactive manufacturer | Replacements may be unavailable |
| No software, licence or dongle | Extra cost or machine may not run |
| History of surge or water damage | Hidden damage may cause later failures |
| Burnt marks, swollen capacitors, corrosion | Active or impending faults |
| Bypassed fuses or modified wiring | Safety risk and sign of unresolved problems |
| Intermittent errors during test | Hard-to-fix faults ahead |
Estimating potential electronics costs
When negotiating, estimate what you might need to spend on electronics after purchase. A main board and carriage board replacement, power supply, cables and technician visits can add up to a significant amount. Our main board price guide and carriage board price guide give indicative figures. Use these to set a realistic offer and to compare the used machine with a new one, using our eco-solvent printer price guide.
Questions to ask the seller about electronics
- Has the main board or carriage board ever been replaced or repaired? When, by whom and why?
- Has the machine ever been affected by a storm, surge, power fault or water leak?
- What power protection did you use: stabiliser, UPS, surge protection, earthing?
- Have there been any recurring errors or connection problems?
- Has the firmware been updated, and do you have the files and settings backups?
- Will you include the PC, software installers, RIP licence and dongle?
- Do you have the original invoice and the machine supplier’s contact details?
- Can the machine be tested for an extended period before payment?
Honest sellers usually answer these questions readily. Vague or evasive answers about electronics history are a warning sign.
Machines from dealers versus private sellers
Used machines are sold by dealers who refurbish them and by shop owners selling directly. Dealers may offer a short warranty, clean electronics and replaced parts, but ask exactly what was refurbished and whether boards are original. Private sellers may offer lower prices and real usage history, but usually no warranty. In both cases, the same inspection steps apply. If a dealer claims boards were replaced, ask for the board models and invoices.
Machines that have been idle
A printer that has been switched off for months may have dried heads, but its electronics can also suffer: humidity can corrode connectors, rodents can damage cables, and capacitors in the power supply can degrade. Inspect idle machines especially carefully for corrosion and cable damage, and run a longer test. Do not judge an idle machine’s electronics only by whether it powers on.
Machines converted or modified by previous owners
Some used machines have been converted to different heads or board systems, for example from XP600 to i3200 or from one board brand to another. Conversions are not necessarily bad, but they add risk. Ask who did the conversion, which kit was used, and whether configuration backups are available. Check for neat wiring, correct capping and secure head mounting. Our guide to XP600 to i3200 conversion explains what a proper conversion involves.
Common electronics faults found in used printers
| Fault | How it shows | Likely cost impact |
|---|---|---|
| Worn carriage data or head cables | Intermittent nozzle loss or errors at certain carriage positions | Low to moderate |
| Weak power supply | Random restarts, errors under load | Moderate |
| Damaged network port | Connection drops or no connection | Moderate; repair or board replacement |
| Failing heater relay or sensor | Heater errors, uneven drying | Low to moderate |
| Ink-contaminated carriage board | Nozzle dropouts, errors, burnt connectors | Moderate to high |
| Failing main board | Multiple unrelated errors, connection loss | High |
| Missing software or licence | Machine cannot be driven or RIP cannot print | Moderate to high |
Bring a technician
If you are not experienced with printer electronics, bring a qualified technician to the inspection. The cost of a technician’s time is small compared with the cost of buying a machine with hidden electronics problems. A technician can also judge the condition of mechanics and heads, and estimate repair costs on the spot.
After purchase: first steps
- Install the machine on a properly earthed and protected supply.
- Clean the electronics compartment and service fans and filters.
- Back up machine parameters and RIP settings immediately.
- Record board models, versions and serial numbers.
- Check head voltage settings and recalibrate.
- Establish a monthly electronics inspection routine.
Our guide to printing machine installation covers installation best practices.
Negotiating based on electronics findings
Use your inspection findings to negotiate fairly. If the main board is an older generation still supported, factor in a modest reserve for future electronics repairs. If boards show signs of repair or contamination, ask for a price reduction that reflects the risk, or for the seller to replace the affected parts before sale. If software or the RIP licence is missing, deduct the cost of buying it. If the machine has an obsolete or locked board with no supplier support, consider walking away unless the price is low enough to justify a full board kit upgrade. A clear, documented list of findings makes negotiation easier and more objective.
Used versus new: the electronics view
A new machine comes with current boards, matching firmware, software licences, warranty and supplier support. A used machine may offer good value, but its electronics carry unknown history. If the used machine’s price plus a realistic electronics reserve, head replacement and installation approaches the price of a new machine, the new machine is often the better long-term investment, especially for a shop that depends on one printer for its income.
Get it in writing
Before paying, write down what is included in the sale: the machine, PC, software installers, RIP licence and dongle, spare parts, manuals and any warranty or return terms offered. Note the board models and serial numbers you recorded. Both parties should sign. This simple document prevents disputes about missing software or swapped parts after the machine is moved.
Electronics check: inspection checklist
| # | Check | Result |
|---|---|---|
| 1 | Main board and carriage board identified and photographed | ☐ |
| 2 | Board generation and support status confirmed | ☐ |
| 3 | Lock status clarified | ☐ |
| 4 | Electronics compartment inspected: dust, ink, burns, capacitors, corrosion, wiring | ☐ |
| 5 | Power supply and fans checked | ☐ |
| 6 | Connection tested with a different PC | ☐ |
| 7 | Firmware, parameters and head voltage settings checked | ☐ |
| 8 | RIP licence and dongle verified and transferable | ☐ |
| 9 | One-hour or longer functional and print test completed | ☐ |
| 10 | Heaters, sensors and motion tested | ☐ |
| 11 | No errors, drops or restarts during test | ☐ |
| 12 | Service history and surge or water damage history obtained | ☐ |
Further reading: Swollen or leaking capacitors are a classic sign of ageing electronics; this article on capacitor failures shows what to look for.
Key takeaways
- Electronics determine whether a used printer can be kept running; check them as carefully as the heads.
- Identify the boards and confirm they are supported and not locked to an inactive maker.
- Inspect for dust, ink, burns, swollen capacitors, corrosion and modified wiring.
- Run a long functional test with your own PC and confirm software, licence and dongle transfer.
- Bring a technician, and factor potential electronics costs into your offer.
The Unified Engineering Dynamics team can inspect a used eco-solvent printer with you, assess its electronics and estimate repair costs, or help you compare it with a new machine.
More in the main board series
This article is part of our series on eco-solvent printer main boards. Continue with the other guides:
- Eco-Solvent Printer Main Board: Functions, Ports and Common Failure Points
- Main Board Failure Symptoms: No Connection to PC, Carriage Not Moving, Error Codes
- Hoson vs Senyang vs BYHX Main Boards: Which Board Kit Suits Your Printer?
- Main Board Firmware Updates: When to Update, Risks and Backup Steps
- Board Kit Upgrade: Converting an XP600 Printer to i3200 (Main + Head Board Changes)
- Network Port and USB Problems on Main Boards: Faults Operators Can Fix Themselves
- Main Board Replacement Checklist: Dongle, Software Licence, Maintop/PhotoPrint Settings
- Lightning, Surges and Earthing Faults: Why Main Boards Die in Monsoon Season
- Eco-Solvent Main Board Price in India: XP600, i3200, DX5 Kits Compared
Related: our head carriage board series starts with the head carriage board explained, and our fire board series starts with what a fire board is and what it does. For a side-by-side view of all three boards, read fire board vs head board vs mainboard.
For a system-wide view, see our complete guide to eco-solvent printer electronics, our step-by-step electronics fault isolation guide and the monthly electronics maintenance checklist.
Frequently Asked Questions
What should I check in the electronics of a used eco-solvent printer?
Identify the main and carriage boards, confirm support and lock status, inspect for dust, ink, burns, swollen capacitors and corrosion, and run a long functional test.
Why does the main board brand matter in a used printer?
Because replacement boards, firmware and support depend on it. An obsolete or locked board can make future repairs expensive or impossible.
Should the software and dongle come with a used printer?
Yes. Without the correct print control software, RIP licence and dongle, the machine may not work, and buying licences separately adds cost.
How long should I test a used printer?
At least one hour, ideally longer, printing real jobs at different speeds and full width to reveal heat-related and intermittent faults.
Is surge damage history important?
Yes. Surge or water damage can leave weakened components that fail later. Ask about it and inspect carefully.
Should I bring a technician?
If you are not experienced with printer electronics, yes. A technician can spot hidden problems and estimate repair costs before you commit.