Direct answer: Adding UV flatbed white varnish heads, for example moving from two i3200-U1 heads (CMYK + white) to three heads (CMYK + white + varnish), or from four Ricoh heads to six, requires a carriage board and main board that support the higher head count, an extra head with its cable and adapter, an additional ink channel with damper and, for white, circulation, a software licence and settings that include varnish, and enough curing capacity for thicker layers. On many small flatbeds this means replacing the board kit with a 3-head or 4-head version of the same system. Check board capacity, software, ink system, lamp power and mounting space before buying anything.
Adding UV flatbed white varnish heads can open premium spot gloss and raised print work, but only if boards, ink, software and curing are planned together.

Table of Contents
White and varnish are what make UV flatbed printing valuable: white under colour on clear acrylic and glass, and gloss or raised varnish on visiting cards, trophies, packaging and decor panels. Many shops start with CMYK + white and later want varnish. This guide explains what the upgrade involves, building on our explanation of Hoson, Senyang and BYHX flatbed boards.
Typical flatbed head layouts
| Layout | Heads | Typical machines |
|---|---|---|
| CMYK + W | 2 × i3200-U1 or XP600 (one CMYK, one white) | A3, A2, 6090 |
| CMYK + W + V | 3 × i3200-U1 or XP600 | A2, 6090, some A3 |
| CMYK + W + V (higher speed) | 4 × i3200-U1 (two CMYK, one W, one V) | 6090, 1313, 1610 |
| CMYK + W | 4–5 × Ricoh Gen5/Gen6 | 2513 |
| CMYK + W + V | 6–8 × Ricoh Gen5/Gen6 | 2513, 3020 |
What adding UV flatbed white varnish heads involves
1. Board capacity
A 2-head board cannot drive 3 heads. On most Epson-head flatbeds you need a 3-head or 4-head board set from the same system, often including a new main board. On Ricoh machines, check whether the existing carriage board has spare channels or whether an additional board is required.
2. Head, cable and adapter
The new head needs its own cable, adapter or head board connection and mounting position. Heads must be aligned precisely with the others, which may require a new head plate on small machines.
3. Ink system
Varnish needs its own tank, filter, damper and line. White needs circulation or regular agitation to prevent settling. Adding varnish to a machine without space for another ink channel may require a new ink station.
4. Software and licence
Print control software must support the extra channel, and some licences cover only CMYK + white. The RIP must support varnish layers, spot channels or separate passes. Check both before buying hardware.
5. Curing
Varnish and raised effects use thicker layers that need more UV energy. Check whether the existing lamps and their cooling can cure the extra ink, or whether more passes, higher lamp power or an upgraded lamp are needed. See UV curing problems.
6. Power and cooling
More heads and longer lamp-on times mean more heat on the carriage. Check fans, chiller capacity on water-cooled machines and power supply ratings.
Upgrade paths
| Starting point | Upgrade | Usual changes |
|---|---|---|
| 2 × XP600 (CMYK+W) | 3 × XP600 (add V) | 3-head board set, head, cable, ink channel, software |
| 2 × XP600 | 2–3 × i3200-U1 | i3200 board kit, heads, cables, head plate, software, profiles |
| 2 × i3200-U1 | 3 × i3200-U1 | 3-head i3200 kit, head, cable, ink channel, software |
| 4 × Ricoh Gen5 (CMYK) | 5–6 × Ricoh (add W, V) | Board capacity, heads, cables, ink and circulation, software |
Moving from XP600 to i3200-U1 at the same time is a larger project; see our UV flatbed head upgrade guide.
Indicative costs of UV flatbed white varnish heads
| Item | Indicative price |
|---|---|
| Epson i3200-U1 head | About ₹78,000–95,000 in Indian listings |
| Epson XP600 head | About ₹12,000–15,000 |
| Hoson i3200 double-head kit (UV flatbed) | About $600–1,120 from China |
| Ricoh Gen5 head | About ₹1.25–1.55 lakh in India |
| Ink channel parts, cable, adapter | Modest, but add up |
Prices exclude shipping, duty, GST and installation. A technician’s time for alignment, calibration and profiles should be budgeted too.
Is the upgrade worth it?
Varnish lets you offer spot gloss, raised textures, Braille-style effects and premium finishes on cards, packaging, awards and decor. If customers ask for these regularly, the upgrade can pay for itself quickly. If varnish work is occasional, compare the cost with outsourcing or with using a separate pass on the existing white channel, which some workflows allow with limitations. Calculate expected monthly varnish jobs, price per job and upgrade cost before deciding.
Planning checklist for UV flatbed white varnish heads
- Identify current board system, versions and head count.
- Confirm the supplier has a compatible higher-head kit or channel option.
- Check mounting space and head plate for the extra head.
- Plan the ink channel: tank, filter, damper, line, circulation for white.
- Confirm software licence and RIP support for varnish.
- Check lamp power, cooling and power supplies.
- Budget for alignment, calibration and new profiles.
- Get written confirmation of compatibility.
Installation tips for UV flatbed white varnish heads
- Switch off and isolate power before any board or cable work.
- Label old cables and photograph connections before removal.
- Install the new board set following the supplier’s sequence, including firmware.
- Prime the new head carefully and check for leaks before powering heads.
- Set the new head’s voltage from its label and temperatures from the ink maker’s guidance.
- Align heads mechanically and in software, then calibrate bidirectional and step settings.
- Build or update RIP profiles and test white, colour and varnish together.
Common problems after adding heads
| Problem | Likely cause |
|---|---|
| New head not detected | Cable orientation, firmware, licence or board configuration |
| Varnish tacky | Insufficient curing energy, too thick a layer, lamp settings |
| Misregistration between layers | Head alignment or calibration |
| White settling | Circulation not working or not configured |
| Carriage overheating | More heads and lamp time with the same cooling |
Example: adding varnish for visiting cards
A Lucknow print shop with a two-head i3200 A3 flatbed received regular requests for spot-gloss visiting cards and wedding invitations. It upgraded to a three-head Hoson kit with a varnish channel. After alignment and new profiles, it began offering raised varnish cards at premium prices, recovering the upgrade cost within a few months.
Example: licence surprise
A unit bought a third head and cable but discovered its software licence only covered two channels. The supplier provided a licence upgrade, but the machine sat idle for a week. Checking the licence first would have avoided the delay.
Head layout and print order for white and varnish
Once extra heads are fitted, the print order matters as much as the hardware. The board and software must fire the right channels in the right sequence for each application.
| Application | Print order | Notes |
|---|---|---|
| Coloured acrylic or wood, front print | White, then CMYK | White base keeps colours bright on dark or coloured surfaces |
| Clear acrylic, reverse print | CMYK, then white | Viewed through the acrylic; white acts as a backing layer |
| Day-night sign on clear acrylic | CMYK, white, CMYK | Needs software support for three layers |
| Spot gloss card | CMYK, then varnish on selected areas | Varnish file prepared as a spot channel |
| Raised texture | CMYK, then several varnish or white passes | Increases job time and curing load |
| Braille-style dots | Multiple varnish layers | Check local accessibility standards before selling as Braille |
Simultaneous printing, where white and colour heads fire in the same pass with an offset, saves time but requires careful head spacing and software support. Sequential printing, layer by layer, is simpler and more forgiving.
Electrical load of extra heads
Each additional head draws power from the carriage supply, mainly through its driver and heater. On small flatbeds the original power supply may have been sized for two heads only. Adding a third or fourth head can push the supply to its limit, particularly when all heads fire solid areas of white and varnish. Signs of an overloaded supply include resets during heavy prints, voltage warnings and heads dropping out on large solid areas. Ask your supplier whether the new kit needs a higher-rated supply, and check that the cabinet has airflow for any extra heat.
Head spacing and alignment
When fitting UV flatbed white varnish heads, every extra head must sit at the same height and angle as existing ones. A head set even half a millimetre higher than its neighbours produces a different dot size and gloss, and a head that is slightly rotated causes misregistration. After fitting, align mechanically using the head plate adjustment screws, then fine-tune in software with alignment prints. Repeat checks after a week, because new mounts can settle.
Ink choice for varnish
Varnish inks vary in viscosity, gloss and curing speed. Some are designed for flat gloss, others for raised effects. Using varnish from the same ink system as your colours generally gives better adhesion and curing compatibility. Before committing to a large purchase, run tests on your common substrates: coated paper cards, acrylic, PVC and wood. Check adhesion with a cross-hatch tape test and look for yellowing after a few days. Our guide to UV print curing and adhesion testing explains simple test methods.
Lamp sizing for thicker layers
A typical air-cooled LED lamp on an A3 flatbed is sized to cure CMYK and a white base at normal speeds. Raised varnish may need extra passes or slower printing to cure fully. On larger machines, water-cooled lamps with higher output handle thick layers better. Signs of under-curing include tacky surfaces, poor scratch resistance and ink smearing when sheets are stacked. Before upgrading lamps, check that existing lamps are clean, at the correct height and running at their rated output, and that cooling is working. See UV LED lamp replacement checks.
Return on investment from UV flatbed white varnish heads
| Item | Example |
|---|---|
| Upgrade cost (board kit, head, parts, installation) | Varies widely; get a written quote |
| Typical varnish jobs per month | Count current enquiries you turn away |
| Extra margin per varnish job | Premium over CMYK-only price |
| Payback period | Upgrade cost ÷ monthly extra margin |
Shops serving wedding invitations, corporate gifts and premium packaging often see the fastest payback. Shops printing mainly signage boards may find white more valuable than varnish.
Common mistakes when adding UV flatbed white varnish heads
| Mistake | Consequence | How to avoid |
|---|---|---|
| Buying a head before checking board capacity | Head cannot be connected | Confirm board channels first |
| Ignoring the software licence | Extra channel locked | Check licence before ordering |
| No white circulation | Clogged white head within weeks | Install circulation or agitation |
| Skipping alignment | Misregistered layers | Align mechanically and in software |
| Under-sized lamps | Tacky varnish | Test curing on real jobs |
| Overloaded power supply | Resets on heavy prints | Check supply rating |
| Wrong head variant | Short head life with UV ink | Use i3200-U1 for UV |
White ink maintenance after the upgrade
White is the hardest ink to keep healthy. Its titanium dioxide pigment settles quickly, blocking filters, dampers and nozzles. After adding or relocating a white head, check that the circulation pump runs as configured, shake white ink bottles before filling, replace white filters more often than colour filters, and run a white nozzle check at every shift start. If the machine will stand idle for several days, follow the ink maker’s advice on circulation or flushing. Our guide to UV white ink circulation parts and maintenance covers pumps, filters and dampers in detail.
Varnish channel maintenance
Once UV flatbed white varnish heads are running, remember that varnish is clear, so blocked nozzles are hard to see on a normal nozzle check. Print the varnish nozzle check on black paper or a dark sheet and view it at an angle under light. Clean the varnish head as regularly as the colour heads, and protect it from reflected UV, because cured varnish on a nozzle plate is difficult to remove.
Bottom line
Adding UV flatbed white varnish heads is a system upgrade, not just an extra head. Board capacity, mounting, ink channel, software licence, curing and cooling all need checking. Plan carefully, confirm compatibility in writing, and budget for alignment and profiling, and the upgrade can open profitable premium work.
Further reading: For background on clear coatings and their finishes, see this overview of varnish.
Key takeaways
- Adding a varnish or extra white head needs a board set that supports the higher head count.
- Plan the ink channel, including circulation for white.
- Check software licence and RIP support for varnish.
- Make sure lamps and cooling can cure thicker layers.
- Budget for alignment, calibration and profiles.
More in the UV flatbed carriage board series
- UV Flatbed Carriage Board Explained
- UV Flatbed Head Board Failure Symptoms
- Hoson vs Senyang vs BYHX UV Flatbed Boards
- Head Crashes, UV Reflection and Board Damage
- UV Flatbed Head Cable vs Carriage Board Fault
- UV Flatbed Carriage Board Replacement Checklist
- Burnt Head Board After an i3200 Head Change
- UV Flatbed Carriage Board Price in India
- UV Flatbed Board Connectors and Static
Related reading on our site: UV flatbed printer spare parts buyer’s guide, UV flatbed boards, cables, motors and interlock spares, UV flatbed printer problems and fixes, Epson i3200 vs XP600 printheads and UV flatbed printer price in India.
Running a UV roll to roll machine as well? The matching guide in our roll to roll series is Adding White and Varnish: Head and Carriage Board Upgrade.
Frequently Asked Questions
Can I add a varnish head to my two-head UV flatbed?
Usually only with a 3-head or 4-head board set from the same system, plus an extra ink channel and software support.
Do I need a new main board to add heads?
On many Epson-head flatbeds the board kit, including the main board, is replaced. On Ricoh machines it depends on spare channels.
What does a varnish head allow me to print?
Spot gloss, raised textures, embossed effects and premium finishes on cards, packaging, awards and decor.
Does varnish need more curing?
Yes. Thicker layers need more UV energy, so check lamp power, cooling and print passes.
Does white ink need special handling?
Yes. White needs circulation or regular agitation to prevent pigment settling.
Will my software support varnish?
Check your print control software licence and RIP. Some licences cover only CMYK and white.
How much does an i3200-U1 head cost?
Indian listings in 2026 ranged from about ₹78,000 to ₹95,000.
Can I switch from XP600 to i3200 at the same time?
Yes, but it is a larger project involving a new board kit, heads, head plate, software and profiles.
Why is my new head not detected?
Common causes are cable orientation, firmware, licence or board configuration.
Why is my varnish tacky?
Usually insufficient curing energy, too thick a layer or incorrect lamp settings.
Is the upgrade worth it?
If customers request varnish regularly, it often pays back within months. For occasional jobs, compare with outsourcing.
Do more heads mean more heat?
Yes. More heads and longer lamp time increase carriage heat, so check fans and chiller capacity.
What should I confirm with the supplier?
Board compatibility, firmware, licence, cables, mounting and installation sequence, in writing.
Can Unified Engineering Dynamics help plan a white or varnish upgrade?
Yes. Our team can check your machine details and supply compatible boards, heads and parts.
What print order is used for clear acrylic?
Reverse printing usually uses CMYK first, then white as a backing layer, viewed through the acrylic.
Will extra heads overload my power supply?
They can on small flatbeds. Ask the supplier whether a higher-rated supply is needed.
Can I use any varnish ink?
Varnish from the same ink system as your colours usually gives better compatibility. Test adhesion and curing first.
How do I check varnish nozzles?
Print the nozzle check on black paper or a dark sheet and view it at an angle under light.