UV Printing

Hoson vs Senyang vs BYHX Carriage Boards for Ricoh Gen5/Gen6 and Konica 1024i UV Roll to Roll Printers

Ricoh Gen5 Carriage Board: Hoson vs Senyang vs BYHX for UV

Direct answer: BYHX, Hoson and Senyang all make Ricoh Gen5 carriage board systems for UV roll to roll printers, and BYHX and some others also support Ricoh Gen6 and Konica KM1024i. The boards are not interchangeable between brands: each system uses its own mainboard, carriage board, adapter boards, firmware and print control software. For a repair, the safest choice is almost always the same brand, model and compatible version as the board already in your machine. Switching brands makes sense only as a planned conversion of the whole board system, usually to gain support, features or spare availability.

Choosing the right Ricoh Gen5 carriage board system decides how quickly you can get spares, support and repairs for your UV roll to roll printer.

Ricoh Gen5 Carriage Board: Hoson vs Senyang vs BYHX for UV
Ricoh Gen5 Carriage Board: Hoson vs Senyang vs BYHX for UV

Owners of UV roll to roll printers in India often hear conflicting advice about board brands. One supplier praises BYHX, another recommends Hoson, and a third offers a cheaper Senyang or UMC board. This guide compares the main systems you will find on Ricoh Gen5, Gen5i, Gen6 and Konica 1024i UV machines, explains what genuinely matters when choosing, and shows how to avoid buying a board that will not work in your machine. For background on what the board does, start with our guide to the UV roll to roll carriage board.

What a board system includes

A board system is more than a single carriage board. It typically includes:

  • A mainboard in the electrical cabinet that communicates with the PC and controls motors, sensors, lamps and other systems.
  • A carriage board or head board on the moving carriage.
  • Adapter or transfer boards that connect each head or pair of heads.
  • Data link cables between the mainboard and carriage.
  • Firmware loaded on the boards.
  • Print control software on the PC, which works alongside RIP software such as PhotoPrint, Onyx, Caldera or Maintop.

All of these parts are designed to work together. That is why replacing one board with another brand’s board usually fails, even if the connectors look similar.

BYHX: the common industrial choice

BYHX is widely used on industrial UV roll to roll and flatbed printers with Ricoh Gen5, Gen5i and Gen6 heads, as well as Konica KM1024i and some Kyocera configurations. Many Chinese manufacturers have built machines on BYHX for years, so the system is well known among Indian technicians.

Strengths

  • Mature software with detailed head settings, calibration tools and support for white and varnish channels.
  • Wide familiarity among technicians and traders in India.
  • Board kits and individual boards are widely listed by suppliers, with BYHX Gen5 four-head UV mainboards listed around $845 to $866 on Chinese marketplaces in late 2026.

Points to watch

  • Many versions exist. A carriage board must match the mainboard version, firmware and software.
  • Some machines use authorisation or locked settings from the manufacturer, which can complicate replacements.
  • Genuine and refurbished boards are sold side by side, so confirm condition before buying.

Hoson: strong on Epson heads, growing on Ricoh

Hoson is very common on Epson-head machines, including i3200-U1 UV printers, and has developed board kits for Ricoh Gen5 and Gen6 UV machines. A Hoson Gen5/Gen6 four-head UV board kit, version 3.74, was listed at about $1,103 on Alibaba in late 2026.

Strengths

  • Familiar software for operators who also run Hoson eco-solvent or DTF machines.
  • Kits are widely available and often used for upgrades and conversions.
  • Good fit for smaller UV roll to roll machines with Epson i3200-U1 heads.

Points to watch

  • Ricoh support is newer on some versions, so confirm that your exact head type, head count and white/varnish layout are supported.
  • As with all systems, versions must match.

Senyang: common in conversions

Senyang boards appear on some Chinese brands and in conversion kits, particularly for Epson heads, with Ricoh support on certain versions. They are often chosen for price and availability.

Strengths

  • Often lower cost than other systems.
  • Used in conversion kits that allow older machines to change head types.

Points to watch

  • Fewer technicians in some Indian regions are familiar with Senyang software.
  • Confirm Ricoh head support and version carefully before buying.

UMC and machine-specific systems

Some manufacturers use UMC or their own board designs. For example, a UMC Gen5 four-head carriage board for Docan, Flora, Wit-Color and Yaselan printers was listed at $652 with a three-month warranty by a Chinese supplier in late 2026. These systems can work very well, but spares are usually available only through the manufacturer or a small number of traders, so availability and support should be considered carefully.

Comparison at a glance

FactorBYHXHosonSenyangUMC / machine-specific
Ricoh Gen5/Gen5iWidely usedSupported on newer kitsSome versionsModel-dependent
Ricoh Gen6Supported on newer versionsSupported on some kitsCheck versionModel-dependent
Konica 1024iWidely usedLess commonLess commonModel-dependent
Epson i3200-U1SupportedVery commonCommonModel-dependent
Technician familiarity in IndiaHighHighMediumLow to medium
Spare availabilityGoodGoodMediumLimited

This table reflects general market observations. Always confirm support for your exact configuration with the supplier.

What really matters when choosing a Ricoh Gen5 carriage board

When you are choosing a Ricoh Gen5 carriage board or any UV board, focus on these factors rather than brand reputation alone:

  1. Compatibility with your existing system: mainboard version, firmware and software.
  2. Head support: exact head type, such as Gen5 MH5420, Gen5i or Gen6, and head count, including white and varnish channels.
  3. Supplier support: can the supplier help with installation, settings and troubleshooting?
  4. Spare availability: can you get another board quickly if this one fails?
  5. Warranty and condition: new, refurbished or used, with clear warranty terms.
  6. Total cost: price plus shipping, duty, GST, installation and downtime.

Why like-for-like replacement is usually best

For repairs, fitting the same brand, model and compatible version as the failed board is almost always the fastest and lowest-risk option. Settings, calibrations and operator habits remain the same, and the existing mainboard and software continue to work. Changing to a different brand means replacing the mainboard, carriage board, adapter boards and software, then recalibrating the whole machine and retraining operators.

Like-for-like is especially important for UV machines because white ink, varnish, lamp control and negative pressure settings are often integrated into the board system. Changing systems means reconfiguring all of these.

When switching systems makes sense

A planned system change can be worthwhile when:

  • The current board system is no longer supported and spares are unavailable.
  • You are upgrading heads, for example from Ricoh Gen5 to Gen6, and the current system does not support the new heads.
  • You run several machines and want to standardise on one system for spares and training.
  • The current system has persistent problems that the supplier cannot solve.

In these cases, treat it as a project: budget for the full kit, installation, calibration, possible software licences and downtime. Our guide to UV printer head upgrades and carriage board changes discusses planning such projects.

Identifying your current board system

To identify your system:

  1. Check the print control software’s name and “About” screen.
  2. Look for brand names or logos printed on the mainboard and carriage board.
  3. Note version numbers printed on the boards.
  4. Check the machine’s documentation or ask the original supplier.

Photograph the boards in place and keep the photos in your machine file. These details are essential when ordering spares.

Version matching within a brand

Even within one brand, versions matter. A carriage board from an older generation may not work with a newer mainboard, or may need different firmware. Some suppliers note that you must provide a photo of your existing board so they can match the version. For example, a supplier of Ricoh Gen6 board sets lists separate sub-board versions, V2.1b and V2.2a, and asks customers to confirm their configuration before ordering. Always send photos and version details to your supplier before buying.

Authorisation and locked systems

Some manufacturers lock their machines so that boards need authorisation codes or specific settings to work. This protects the manufacturer’s support arrangement but can complicate repairs. Before buying a replacement board from a third party, ask the original supplier whether authorisation is required and how it is obtained. Without it, a perfectly good board may not work.

Price comparison

Indicative late-2026 prices from public listings, before shipping, duty and GST:

ItemListed price
Ricoh Gen5 head/carriage boards (various suppliers)$287 – $650
UMC Gen5 4-head carriage board$652
Hoson Gen5/Gen6 4-head UV board kit (v3.74)$1,103
Ricoh Gen5 4-head UV board kits$1,360 – $1,770
BYHX Gen5 4-head UV mainboard$845 – $866
Ricoh Gen6 adapter board (one supplier)$310.70

Prices vary widely with version, condition and supplier. See our full guide to UV roll to roll carriage board prices in India.

Questions to ask a board supplier

  • Is this board compatible with my mainboard version, firmware and software? Please confirm in writing.
  • Does it support my head type, head count and white/varnish configuration?
  • Is it new, refurbished or used?
  • Is any authorisation or licence needed?
  • What warranty applies, and how are claims handled?
  • Can you help with installation and settings?
  • How quickly can you supply a second board if needed?

Example: a mismatched version

A unit in Jaipur bought a BYHX carriage board online for their Ricoh Gen5 roll to roll printer after the original failed. The new board fitted the connectors but the software would not detect any heads. The supplier had sent a board from a newer generation that required a different firmware and mainboard version. After several days of downtime, the unit sourced a correct-version board through a local trader who checked photos first. The lesson: send photos and version details before ordering, and get compatibility confirmed in writing.

Example: a sensible system change

A unit running three UV machines with two different board systems decided to standardise on one system when one machine’s original system became hard to support. They planned the change during a slow month, bought a complete kit with installation support, and trained operators. The result was simpler spares stock and easier troubleshooting across all machines.

Software differences that affect daily work

Operators spend far more time with the print control software than with the boards themselves, so software differences matter in daily production:

  • Head settings screens: each system has its own layout for voltage, waveform, temperature and head mapping. Technicians familiar with one system may need time to learn another.
  • Calibration tools: alignment, bidirectional correction and feed calibration routines differ in how they are printed and entered.
  • White and varnish handling: the way white underbase, overprint and varnish layers are defined varies, and some RIP workflows suit certain systems better.
  • Error messages: wording and codes differ, so a fault log should note the exact text of each message.
  • Language and documentation: some software versions have limited English documentation, which makes local technician support more important.

If your operators are already trained on one system, staying with it saves retraining and reduces mistakes during the first weeks after any change.

Support in India: what to check

A board system is only as good as the support available when something goes wrong. Before committing to a system for a new machine or conversion, ask:

  • How many technicians in your region know this system?
  • Do Indian traders hold stock of carriage boards, adapter boards and cables for your version?
  • How quickly can a replacement board reach you, including customs clearance if imported?
  • Does the supplier offer remote support for software settings?
  • Is board repair available locally for this system?

For machines in tier-2 and tier-3 cities, local familiarity often matters more than small differences in features. A system that a technician in your city knows well will usually give you less downtime than a technically superior system that nobody nearby can support.

Head compatibility in more detail

When suppliers say a board “supports Ricoh Gen5”, confirm exactly which variants they mean. Gen5 includes different models, such as MH5420 (two-colour) and MH5440, with different cable lengths and configurations. Gen5i and Gen6 have their own requirements. Konica KM1024i comes in variants with different drop sizes. A board that supports one variant may not support another without different adapter boards or firmware. Always state the exact head model printed on your head label when asking about compatibility, and check our Ricoh Gen5 vs Gen5i comparison for head differences.

Keeping records across a fleet

Units with several UV machines should keep a simple board register: machine, board system, mainboard version, carriage board version, adapter boards, firmware, software version and head type. Update it after every repair or upgrade. When a board fails, the register tells you immediately what to order and whether a spare from another machine might fit. It also shows which machines would benefit most from standardisation.

Conversions: moving an older machine to a new board system

Some owners convert older UV roll to roll printers to a different board system when the original becomes unsupported. A conversion typically replaces the mainboard, carriage board, adapter boards, data cables and software, and may also need new motor driver connections, sensor wiring and lamp control wiring. The machine must then be fully recalibrated. Conversions can extend the life of a mechanically sound machine by years, but they need an experienced technician and careful planning. Ask the conversion supplier for a written list of what is included, which machine functions are supported, and how long installation and calibration will take. Budget for a few days of downtime and a period of fine-tuning afterwards.

Further reading: For background on how industrial piezo heads and their control electronics work together, see this overview of inkjet printing.

Key takeaways

  • BYHX, Hoson and Senyang all offer Ricoh Gen5 carriage board systems, with differing support for Gen6, Konica 1024i and Epson heads.
  • Boards are not interchangeable between brands; each system includes its own mainboard, carriage board, adapters, firmware and software.
  • For repairs, like-for-like replacement with matched versions is usually best.
  • Switch systems only as a planned project with full budgeting.
  • Always confirm compatibility in writing and send board photos before buying.

More in the UV carriage board series

Related reading on our site: UV roll to roll printer price in India, Ricoh Gen5 vs Gen5i printheads, UV LED lamp and module replacement checks, UV curing problems: lamp, ink and power checks and white ink circulation engineering.

Also running solvent or eco-solvent machines? See our sister guides to the solvent flex machine head carriage board and the eco-solvent head carriage board.

Frequently Asked Questions

Which is better for UV roll to roll printers, BYHX or Hoson?

Neither is universally better. BYHX is very common on industrial Ricoh and Konica UV machines, while Hoson is very common on Epson-head machines and also offers Ricoh kits. The best choice is usually the system already in your machine.

Can I fit a Hoson carriage board with a BYHX mainboard?

No. Board systems use different communication methods and software, so carriage boards and mainboards must come from the same system and compatible versions.

Does BYHX support Ricoh Gen6 heads?

Newer BYHX versions support Ricoh Gen6, but support depends on the board version and software. Confirm with your supplier for your exact configuration.

Why does my new carriage board not detect any heads?

The most common reasons are a version mismatch with the mainboard or firmware, missing authorisation, incorrect software settings, or connection errors during installation.

Is Senyang a good choice for UV printers?

Senyang boards can work well, especially in conversions, but confirm head support and local technician familiarity before choosing them.

What is a Ricoh Gen5 carriage board price?

Public Chinese listings in late 2026 show Ricoh Gen5 head and carriage boards from roughly $287 to $650, with four-head UV kits from about $1,100 to $1,770.

Should I switch board systems when upgrading heads?

Only if your current system does not support the new heads or you want to standardise. Plan it as a full project with kit, installation, calibration and training.

What details should I send a supplier before buying?

Photos of the existing boards, brand and version numbers, software version, head type and count, and machine model.

Are refurbished boards worth buying?

They can be, if tested and sold with a clear warranty by a reliable supplier. Confirm condition and test history before buying.

Do UV boards need authorisation codes?

Some machines do. Ask the original supplier whether authorisation is required before buying a third-party board.

Can one board system handle white and varnish?

Most industrial UV board systems support white and varnish channels, but support for your exact layout must be confirmed for each version.

Where can I get help choosing a board?

Unified Engineering Dynamics can help identify your system and source compatible boards for UV roll to roll printers.

Do different board systems use different RIP software?

Most board systems work with common RIP software such as PhotoPrint, Onyx, Caldera or Maintop, but each has its own print control software. Confirm RIP compatibility for your system and version.

How important is local technician support when choosing a board system?

Very important. A system that local technicians know well usually means faster repairs and less downtime than a less familiar system.

author-avatar

About Avinash Sharma

Avinash Sharma is the founder of Unified Engineering Dynamics (UED), an industrial digital printing machine supplier and engineering consultancy based in Uttar Pradesh, India. He works hands-on with flex printers, eco-solvent printers, UV flatbed and hybrid printers, DTF and sublimation machines, CO2 lasers and CNC routers - from installation and operator training to cost-per-print economics for new printing plants. His guides help first-time buyers across India choose the right machine for their budget, products and city, with honest setup costs and maintenance realities.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *