UV Printing

UV Flatbed Carriage Board Price in India (2026): Hoson, Senyang, BYHX, i3200 and Ricoh Boards

UV Flatbed Carriage Board Price in India (2026 Guide)

Direct answer: The UV flatbed carriage board price depends on board system, head type and head count. Late 2026 listings from China showed a Hoson i3200 double carriage board for UV flatbeds at about $430, complete Hoson i3200 double-head UV flatbed kits at about $600–1,120, generic double-head kits at about $599–680, and Ricoh Gen5 carriage boards at about $287–652. In India, after shipping, customs duty, GST and dealer margin, expect landed prices well above these figures, typically ₹40,000 to ₹1.2 lakh for common Epson-head boards and kits, and more for Ricoh and BYHX boards. Exact prices depend on version, warranty and stock, so always confirm compatibility and get a written quote.

Knowing the UV flatbed carriage board price before a failure helps you budget, compare quotes and avoid paying for the wrong board.

UV Flatbed Carriage Board Price in India (2026 Guide)
UV Flatbed Carriage Board Price in India (2026 Guide)

Owners searching for carriage board prices are usually dealing with a failure and need to budget quickly. This guide gives indicative prices, explains what drives them, and shows how to avoid paying for the wrong board. It follows our i3200 head change guide.

Indicative prices (late 2026)

ItemListed priceSource type
Hoson i3200 double carriage board (network, UV flatbed)About $430Alibaba supplier listing
Letop Hoson i3200 double-head UV flatbed kit with XYZ axisAbout $898 (3-month warranty)Alibaba
Hoson i3200-U1 double-head full kitAbout $1,120Supplier site
Generic Hoson double-head kitsAbout $599–680Alibaba
Hoson 2-head main boardAbout $380Alibaba
Hoson A3 flatbed main board (i3200/XP600/TX800)About $304Alibaba
XP600 to i3200 conversion kits (Senyang or Hoson)About $680–720Alibaba
Ricoh Gen5 carriage boardsAbout $287–652Alibaba
BYHX Gen5 4-head main boardAbout $845–866Alibaba

These are list prices before shipping, duty, GST and installation. They are indicative and change frequently.

What drives the price

  • Board system: BYHX boards usually cost more than Hoson or Senyang.
  • Head type: i3200 boards cost more than XP600 boards; Ricoh boards vary with head count.
  • Head count: 3- and 4-head boards cost more than 1- or 2-head boards.
  • Connectivity: network-port versions can cost more than USB.
  • Flatbed features: kits supporting XYZ axes, height sensors and vacuum control cost more.
  • Kit vs single board: a single carriage board is cheaper than a full kit, but only if it matches your main board version.
  • Warranty and support: local warranty and technician support add value.
  • Import costs: shipping, customs duty, GST and currency changes.

From China price to Indian landed cost

Cost elementNotes
Board list priceFrom supplier listing
International shippingCourier costs vary with weight and speed
Customs dutyDepends on classification
IGSTApplied on import
Clearance chargesCourier or agent fees
Dealer margin and supportFor locally stocked boards

Buying from a local dealer costs more than the Chinese list price but includes faster delivery, easier returns and support. Direct imports can save money but add risk of the wrong version, long delays and difficult warranty claims.

Single board or full kit?

If only the carriage board has failed and your main board version is still available, a single board is the cheapest option. If the main board is old, versions are hard to match, or you want to upgrade heads, a full kit may be more practical. Kits also avoid version mismatch because all boards come together. Compare prices with our UV flatbed main board price guide.

Repair vs new

Board repair by a specialist can cost a fraction of a new board when damage is limited. Repairs suit burnt connectors, failed regulators and isolated channels. Extensive burns or corrosion usually justify replacement. See UV flatbed board repair vs replacement.

Hidden costs

  • New cables and adapters if the old ones were involved in a short.
  • Head testing or replacement after an electrical failure.
  • Technician time for installation and calibration.
  • Downtime while waiting for parts.
  • Software licence changes for upgrades.

How to get an accurate quote

  1. Photograph both sides of the old board, showing labels and connectors.
  2. Photograph the main board and note the software version.
  3. List head type, head count and machine model.
  4. Describe the failure and root cause.
  5. Ask for compatibility confirmation, warranty terms and delivery time in writing.

Avoiding costly mistakes

MistakeResult
Buying the cheapest listing without checking versionBoard does not work, return costs
Ignoring flatbed featuresZ-axis or sensor functions missing
Not fixing the root causeNew board fails quickly
No warrantyNo recourse if the board is faulty

Budget examples

A3 flatbed, two i3200-U1 heads: a burnt carriage board can be replaced with a matching Hoson board listed around $430 plus import costs and a new cable. If the main board is also old, a full double-head kit at around $600–1,120 may be considered.

2513 flatbed, four Ricoh Gen5 heads: a carriage board listed around $287–652 plus cables and installation, or a specialist repair if damage is limited.

Example: comparing quotes in Lucknow

A Lucknow trophy maker needed a Hoson i3200 carriage board. A direct import quote looked cheaper, but delivery would take three weeks with no local warranty. A local dealer offered the matching version with warranty and delivery in two days at a higher price. Counting lost orders during three weeks of downtime, the local option was cheaper overall.

UV flatbed carriage board price by machine type

The board you need depends on the machine. This table groups common Indian UV flatbed configurations with the kind of board they use and the indicative listed price range.

Machine typeTypical headsTypical board systemIndicative listed board/kit price
A3 desktop flatbed1–2 × XP600 or i3200-U1Hoson or SenyangMain board about $304; carriage board about $430 (i3200 double)
A2 / 6090 flatbed2–3 × i3200-U1Hoson or SenyangDouble-head kits about $600–1,120
1313 / 1610 flatbed3–4 × i3200-U1 or RicohHosonHigher; multi-head kits
2513 flatbed4–8 × Ricoh Gen5 / Gen6BYHX or HosonRicoh Gen5 carriage boards about $287–652; BYHX main boards about $845–866
3020 and larger8+ × Ricoh or KonicaBYHXQuote based on configuration

Genuine, compatible and refurbished boards

Three kinds of boards appear in the market:

  • Genuine new boards from the board maker or authorised suppliers, with matching labels, packaging and warranty.
  • Compatible or clone boards made by third parties to work with a given system. Some work well; others have firmware or quality issues.
  • Refurbished boards repaired after failure. They can be good value with a proper test and warranty.

Unusually low prices often indicate clones or refurbished stock. Ask the supplier directly and compare labels with your old board. Our guide to identifying genuine and compatible flatbed parts explains what to look for.

Total cost of a carriage board failure

The board price is only part of the cost. A realistic budget for a failure on a two-head i3200 flatbed might include:

ItemNotes
Carriage boardMatching version, from dealer or import
Head cablesReplace any involved in the failure
Adapter boardsIf damaged
Head testing or replacementIf a head shorted; i3200-U1 about ₹78,000–95,000
Technician visitInstallation, calibration
Root cause fixDamper, fan, earth, stabiliser
Lost productionDays of downtime × daily margin

Seen this way, preventive measures such as good earthing, cooling and careful handling are inexpensive insurance.

Timing purchases and price changes

Board prices in India move with the rupee-dollar exchange rate, shipping costs and supply from China. Prices can rise before major Chinese holidays when factories close and stock runs short. If you plan to keep a spare board, buy when stock is available rather than waiting for a failure. For machines more than five or six years old, check that boards for your version are still produced; older versions may become scarce, pushing you towards a full kit.

Questions to ask before paying

  1. Is this board the exact model and version for my main board?
  2. Is it new, refurbished or a compatible clone?
  3. Has it been tested, and can you share a test video or photo?
  4. What warranty applies, and what voids it?
  5. What is the delivery time and return policy?
  6. Is firmware included or required?
  7. Do you supply matching cables and adapters?

Getting clear answers in writing avoids disputes later. For broader spare part pricing, see our UV flatbed spare parts buyer’s guide.

Repair pricing

Specialist board repair is common in Delhi, Mumbai and other print hubs. Typical repairs include replacing burnt connectors, regulators, fuses and driver components. Repair prices depend on the damage, and repaired boards should be tested with heads or a test rig before return. Ask the repairer for a warranty period and for the replaced parts to be listed on the invoice.

Comparing UV flatbed carriage board price offers

When you receive several quotes, put them side by side. A low headline price can hide missing items or weaker support.

FactorQuote AQuote BQuote C
Board model and version match☐☐☐
New, refurbished or compatible
Price including GST
Shipping and customs included?
Delivery time
Warranty period and terms
Cables and adapters included?
Installation or remote support
Return policy if incompatible

Fill in each column before deciding. The best value is usually the quote with a confirmed version match, reasonable delivery and clear warranty, not the lowest number.

Head price context

Board prices make more sense alongside head prices. In Indian listings in 2026, an Epson i3200-U1 head cost about ₹78,000–95,000 (UED store and Dpi around ₹92,000, Asian Spare around ₹82,000, True Colors around ₹95,000), an XP600 about ₹12,000–15,000, and Ricoh Gen5 heads about ₹1.25–1.55 lakh. A correctly matched carriage board protects these heads; a poor-quality board can destroy them. See our article on the Epson i3200 printer price in India for wider context.

Budgeting for electronics over a machine’s life

Owners who plan for electronics costs avoid sudden shocks. A practical approach is to set aside a fixed amount each month for heads, boards, cables and lamps, based on machine size and usage. Small A3 flatbeds need a modest reserve; 2513 machines with multiple Ricoh heads need significantly more. Track actual spending in your maintenance log and adjust the reserve every six months.

Negotiating with suppliers

Regular customers often get better prices and faster service. If you run several machines or buy heads and boards regularly from one supplier, ask about bundled pricing for a board plus cables, or for keeping a spare board on consignment. Clear communication, prompt payment and accurate fault reports build relationships that help when urgent parts are needed.

When a full kit beats a single board on price

A single carriage board looks cheaper, but there are cases where a full kit is the better buy. If your main board is an old version that suppliers no longer stock, a matching carriage board may be hard to find and expensive. If both boards are showing age, replacing only one means paying for a second repair soon. If you plan to upgrade from XP600 to i3200-U1 heads within the next year, a new i3200 kit avoids buying an XP600 board you will soon discard. And if you want network connectivity or newer flatbed features such as better height sensing, only a new kit provides them. Compare the total cost over the next two years, not just today’s price.

Price checks for Ricoh flatbeds

For 2513 and 3020 machines, ask whether the carriage board drives all heads or whether the machine uses several boards per head group. Prices are often quoted per board, so a machine with eight Ricoh heads may need two boards for a full replacement. Ricoh Gen5 carriage boards were listed around $287–652 in late 2026, and BYHX Gen5 four-head main boards around $845–866. See our guide to Ricoh Gen5i printhead prices in India.

Bottom line

The UV flatbed carriage board price ranges from a few hundred dollars for a single Hoson or Senyang board to more than a thousand for full i3200 kits, with Ricoh and BYHX boards varying widely. Landed prices in India include shipping, duty, GST and support. Match system and version, fix the root cause, compare single boards with kits and repairs, and count downtime when choosing a supplier.

Further reading: Indian landed prices include GST on top of the board price, shipping and duty.

Key takeaways

  • A Hoson i3200 double carriage board was listed around $430 in late 2026.
  • Full Hoson i3200 UV flatbed kits were listed around $600–1,120.
  • Ricoh Gen5 carriage boards were listed around $287–652.
  • Indian landed prices include shipping, duty, GST and dealer support.
  • Version matching and root cause matter more than the lowest price.

More in the UV flatbed carriage board series

Related reading on our site: UV flatbed printer spare parts buyer’s guide, UV flatbed boards, cables, motors and interlock spares, UV flatbed printer problems and fixes, Epson i3200 vs XP600 printheads and UV flatbed printer price in India.

Running a UV roll to roll machine as well? The matching guide in our roll to roll series is UV Roll to Roll Carriage Board Price in India.

Frequently Asked Questions

What is the UV flatbed carriage board price?

Late 2026 listings showed about $430 for a Hoson i3200 double carriage board, $600–1,120 for full i3200 kits and $287–652 for Ricoh Gen5 carriage boards, before import costs.

How much does a carriage board cost in India?

Landed prices are higher than Chinese list prices after shipping, duty, GST and margin. Get a written quote for your exact board.

Are BYHX boards more expensive?

Generally yes. BYHX Gen5 four-head main boards were listed around $845–866.

Should I buy a single board or a full kit?

A single board is cheaper if your main board version is available; a kit avoids mismatch and suits upgrades.

Is board repair cheaper?

Often, if damage is limited. Extensive burns usually need replacement.

What hidden costs should I expect?

Cables, adapters, head testing, installation, downtime and licences.

Is importing directly from China cheaper?

The list price is lower, but delays, version risk and warranty difficulties can cost more overall.

What details do I need for a quote?

Board photos, main board and software version, head type and count, machine model and failure description.

Do network boards cost more?

Network-port versions can cost more than USB versions.

Do i3200 boards cost more than XP600 boards?

Generally yes, because of higher data rates and driver requirements.

Why does warranty matter?

Boards can arrive faulty or fail early; warranty provides recourse.

How much does an XP600 to i3200 kit cost?

Listings showed about $680–720 for conversion kits with Senyang or Hoson boards.

Should I replace cables with the board?

Yes, if they were involved in the failure.

Can Unified Engineering Dynamics quote for UV flatbed boards?

Yes. Send board photos and machine details for a quote on compatible boards and kits.

Are compatible carriage boards reliable?

Some work well; others have firmware or quality issues. Buy from trusted suppliers with warranty.

Do board prices change often?

Yes. Exchange rates, shipping costs and supply from China all affect prices.

What is the total cost of a board failure?

Board, cables, adapters, possible head replacement, technician time, root cause fix and lost production.

How should I compare board quotes?

Compare version match, condition, total price with GST and shipping, delivery time, warranty, included cables and return policy.

author-avatar

About Avinash Sharma

Avinash Sharma is the founder of Unified Engineering Dynamics (UED), an industrial digital printing machine supplier and engineering consultancy based in Uttar Pradesh, India. He works hands-on with flex printers, eco-solvent printers, UV flatbed and hybrid printers, DTF and sublimation machines, CO2 lasers and CNC routers - from installation and operator training to cost-per-print economics for new printing plants. His guides help first-time buyers across India choose the right machine for their budget, products and city, with honest setup costs and maintenance realities.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *