Direct answer: A successful UV printer warranty claim for a board, printhead or LED lamp depends on evidence. Before claiming, read the warranty terms, stop using the failed part, and collect the invoice, serial numbers, installation date, photos of the part and its installation, nozzle checks before and after, error log screenshots, settings at the time of failure, power and earthing records, and a clear timeline. Suppliers commonly reject claims for surge damage, ink contamination, physical damage, hot-plugging, wrong settings, incompatible ink and third-party repairs, so records showing correct practice are essential. Contact the supplier promptly, describe the failure factually and follow their return process.
A UV printer warranty claim succeeds or fails on evidence, so the records you keep before a failure matter as much as the failure itself.

Table of Contents
Boards, heads and lamps for UV roll to roll printers are expensive, and many come with warranties of a few months to a year. Yet claims are often rejected because owners cannot prove the part failed under normal use. This guide explains how warranties typically work and how to support a claim. It builds on our UV electronics guide.
Typical warranty terms
| Part | Typical warranty | Common exclusions |
|---|---|---|
| Boards (new) | Often 3โ12 months depending on supplier | Surge, burns from hot-plugging, ink damage, physical damage, third-party repair |
| Printheads | Often limited; may cover manufacturing defects only, sometimes short periods | Clogging, cured ink, physical impact, wrong ink, electrical damage from boards |
| UV LED lamps | Varies by supplier | Cooling failure, physical damage, wrong power supply |
| Chillers | Varies by brand and dealer | Wrong coolant, neglect, electrical damage |
| Repaired boards | Repair shop warranty, often short | New faults unrelated to repair |
For example, one Indian trader listed a BYHX KM512 head and main board set with a six-month warranty. Always get warranty terms in writing at the time of purchase.
Why claims get rejected
- Electrical damage: burnt components suggest surge, hot-plugging or a faulty connected part.
- Ink contamination: ink on boards or in connectors.
- Physical damage: cracked boards, damaged nozzle plates, broken connectors.
- Wrong settings: head voltages far above recommended values.
- Incompatible ink: ink not approved for the head.
- Third-party repair: signs of soldering or modification.
- No proof of purchase or installation date.
- Late claim: outside warranty period or reporting window.
Evidence to collect for a UV printer warranty claim
| Evidence | Why it helps |
|---|---|
| Invoice and serial number | Proves purchase and warranty period |
| Installation date and technician | Establishes time in use |
| Photos of part before installation | Shows condition on arrival |
| Photos after failure | Shows absence of physical or ink damage |
| Nozzle checks over time | Shows head performance history |
| Error log screenshots | Shows failure mode |
| Settings record | Shows correct voltages and temperatures |
| Power protection and earth test records | Shows electrical environment was controlled |
| Ink type and approval | Shows ink compatibility |
| Timeline of events | Helps supplier understand cause |
Board claims
For boards, suppliers check for burns, ink, physical damage and repair marks. Support your claim with:
- Photos of the board installed and after removal.
- Records showing power-off procedures and anti-static handling.
- Surge protection and earthing records.
- Error logs and symptoms.
- Confirmation that connected heads were tested, if a head was involved.
Remove and pack the board in an anti-static bag with padding. Do not attempt repairs before claiming.
Printhead claims
Head warranties are often the hardest to claim, because many failures relate to use. Support your claim with:
- Nozzle checks from installation onwards.
- Records of head voltage and temperature settings matching label values and ink maker guidance.
- Ink type and approval from the ink maker.
- Evidence that the driver channel was tested before installation.
- Photos showing an undamaged nozzle plate and clean connector.
Store the failed head as the supplier instructs, usually capped with appropriate fluid. See our guide to bad driver boards and head damage.
LED lamp claims
- Chiller temperature and flow logs.
- Coolant type and change records.
- Lamp power settings.
- Photos of lamp window and housing.
- Curing test records showing when output dropped.
See our guide to lamp cooling and chillers.
The claim process
- Stop using the part to avoid further damage.
- Read the warranty terms and note the claim procedure.
- Collect evidence.
- Contact the supplier promptly in writing, with a factual description and evidence.
- Follow their instructions for testing or return.
- Pack parts properly and keep shipping receipts.
- Keep copies of all communication.
- Follow up politely if responses are slow.
Writing the claim
A good claim message is short and factual: part, serial, purchase date, installation date, what happened, what you checked, evidence attached, and what you request (replacement, repair or refund). Avoid blaming language; focus on facts.
Preventing disputes
- Buy from suppliers with clear written warranties.
- Inspect and photograph parts on arrival.
- Follow installation procedures and record them.
- Keep settings, nozzle check and maintenance records.
- Maintain power protection and earthing records.
Example: board claim accepted
A unit’s new carriage board failed after three weeks. They provided installation photos, error logs, earth test results and records of power-off procedures. The supplier tested the board, found a component defect and replaced it.
Example: head claim rejected
Another unit claimed for a new head that failed in a week. The supplier found voltages set well above the label value and no record of driver testing after a previous head failure. The claim was rejected. With proper records and procedures, the outcome might have been different, and the head might not have failed.
Understanding warranty language
Warranty documents use terms that matter:
- Manufacturing defect: a fault from production, not from use. Most warranties cover only this.
- Normal use: operation according to the manual and recommended settings.
- Consumable: parts expected to wear, often excluded.
- Replacement or repair at supplier’s discretion: the supplier chooses how to resolve.
- Return to base: you ship the part to the supplier at your cost.
- On-site: a technician comes to you.
Read terms before buying, not after a failure.
Machine warranties vs part warranties
New UV roll to roll printers usually come with a machine warranty covering electronics for a period, often with heads excluded or limited. Replacement parts bought later have their own warranties. When a part fails under machine warranty, the dealer usually handles the claim. Keep the machine warranty certificate and service records, because claims may require evidence of regular maintenance by authorised technicians.
Imported parts
Parts bought from overseas suppliers are harder to claim. Shipping back is costly and slow, and communication may be difficult. Before buying, ask about warranty process, who pays shipping, and whether they accept photos and videos as initial evidence. Some Indian traders offer local warranty on imported parts, which is often worth a slightly higher price.
Testing before returning
Suppliers often ask for tests before accepting a return: swap tests, voltage readings, photos and videos of errors. Cooperate, but do not attempt repairs. Videos showing the fault, the error message and the part installed correctly are particularly convincing.
Claim timeline template
| Date and time | Event |
|---|---|
| Purchase date | Part bought, invoice number |
| Installation date | Installed by, settings used, tests passed |
| Normal operation period | Nozzle checks, jobs printed |
| First symptom | What was seen, conditions |
| Checks performed | Swap tests, inspection results |
| Part removed | Condition, photos |
| Claim submitted | To whom, how |
Records that support every claim
The same records that support warranty claims also support good maintenance: machine profile, settings records, nozzle check photos, fault diary, maintenance log, temperature log, power and earth test results, and invoices. Our preventive maintenance checklist shows how to build these records routinely.
When a claim is rejected
If a claim is rejected, ask for the reason in writing and any test results or photos. If you believe the rejection is wrong, provide additional evidence calmly. Sometimes suppliers offer a discounted replacement or repair as goodwill. Use the rejection as a lesson: if the cause was surge, wrong settings or handling, fix that to prevent the next failure.
Repair as an alternative
If a board is out of warranty or the claim is rejected, repair may still be economical. Many board faults are repairable by specialists. See our guide to repair vs replacement.
Warranty and installation by others
Some suppliers require installation by their own or authorised technicians to honour warranties, especially for heads and main boards. If your own staff install parts, ask whether this affects warranty, and record installation steps with photos and videos. Following the supplier’s written procedure strengthens your position.
Warranty for heads damaged by boards
If a head fails because of a faulty board, the head supplier may reject the claim, while the board supplier may not cover the head. This is why testing driver channels before installing heads is so important. If you suspect a board damaged a head, document both parts and discuss with both suppliers; sometimes a combined resolution is possible when the same supplier provided both.
Warranty and power events
Most warranties exclude damage from surges, lightning and power faults. Some businesses insure machines against electrical damage. Check whether your business insurance covers electrical breakdown or lightning damage to equipment, and what records insurers require. Surge protection, earthing records and storm procedures can support insurance claims too. See our surge protection guide.
Warranty checklist when buying
- Warranty period and start date.
- What is covered and excluded.
- Claim process and contact.
- Who pays shipping.
- Replacement, repair or refund options.
- Installation requirements.
- Evidence required.
- Terms in writing on invoice or warranty card.
Organising warranty records
Keep a folder, physical or digital, for each machine with invoices, warranty cards, serial numbers, installation records and claim correspondence. Note warranty expiry dates in a calendar so you can inspect parts before warranty ends and claim for developing faults in time.
Example claim message
A clear message might read: “We purchased a Ricoh Gen5 carriage board, serial number X, invoice number Y, on 5 August. It was installed on 8 August following your procedure with power off and anti-static precautions; photos attached. The machine printed normally for three weeks. On 29 August, heads 3 and 4 stopped printing with a communication error (screenshot attached). We checked cables by swapping with spares and the fault stayed with the board. Earth resistance was tested in June (record attached), and the machine runs through a stabiliser, UPS and surge protection. The board has been removed and stored in its anti-static bag. Please advise on the return or replacement process.”
Warranty differences between suppliers
Warranty terms vary widely between suppliers. Some offer longer warranties with stricter conditions; others offer short warranties with easy replacement. A local supplier with a six-month warranty and quick replacement may be more useful than a longer warranty from a distant supplier with a slow process. Consider the whole service, not just the period.
Warranty and second-hand machines
Used machines usually carry little or no warranty, unless bought from a dealer offering one. Remaining manufacturer warranty may not transfer. Ask in writing, and budget for repairs. See our guide to checking a used UV roll to roll printer.
Building trust with suppliers
Suppliers handle many claims, some genuine and some not. Customers who provide clear evidence, follow procedures and communicate politely usually get faster, fairer outcomes. Building a long-term relationship with a supplier, buying consistently and paying on time also helps when you need goodwill.
Lessons from rejected claims
| Rejection reason | Prevention |
|---|---|
| Surge damage | SPDs, earthing, stabiliser, UPS, storm procedures |
| Hot-plugging burns | Power-off rule for all connections |
| Ink damage | Fix leaks, shields, regular cleaning |
| Wrong settings | Settings records, label voltages, supplier guidance |
| Incompatible ink | Head approval from ink maker |
| No evidence | Photos, logs, records |
Example: lamp claim with chiller logs
A unit’s UV LED lamp lost much of its output after four months. The supplier first suggested cooling failure. The unit provided daily chiller temperature logs showing stable readings, coolant change records and curing test results showing a sudden drop rather than a gradual decline. The supplier accepted that the lamp had an internal defect and supplied a replacement. Without the logs, the claim would almost certainly have been rejected as a cooling problem.
This example shows why simple daily records, which take seconds to write, can be worth thousands of rupees when something goes wrong.
Bottom line
A UV printer warranty claim is won or lost on evidence. Read terms before buying, photograph parts on arrival, install them correctly, keep settings, nozzle check, maintenance and power records, stop using failed parts and claim promptly with a clear, factual message. The same habits also prevent many failures in the first place.
Further reading: A warranty usually covers manufacturing defects under normal use, not damage from external causes.
Key takeaways
- A UV printer warranty claim succeeds with evidence of normal use and correct practice.
- Common exclusions include surge, ink, physical damage, wrong settings and third-party repairs.
- Keep invoices, photos, nozzle checks, settings, error logs and power records.
- Stop using failed parts and contact suppliers promptly in writing.
- Good records also help prevent failures.
More in the UV roll to roll electronics guides
- UV Roll to Roll Printer Electronics: Complete Guide
- UV Printer Fault Finding: Board, Head, Cable or Lamp
- UV Printer Compatibility Table
- UV Printer Electronics Spares Inventory
- UV Printer Monthly Preventive Maintenance
Related reading on our site: UV roll to roll printer price in India, Ricoh Gen5 vs Gen5i printheads, UV LED lamp and module replacement checks, UV curing problems: lamp, ink and power checks and white ink circulation engineering.
Also running solvent or eco-solvent machines? See our sister guides to the solvent flex machine main board and the complete eco-solvent printer electronics guide.
Frequently Asked Questions
How do I make a warranty claim for a UV printer board?
Stop using the board, collect invoice, photos, error logs and records, contact the supplier in writing and follow their return process.
Why are printhead warranty claims often rejected?
Many head failures relate to use, such as clogging, wrong settings, incompatible ink or electrical damage. Records showing correct practice help.
Does surge damage count under warranty?
Usually not. Most warranties exclude surge and electrical damage. Surge protection records can help show the environment was controlled.
Should I repair a part before claiming?
No. Repairs usually void warranty. Claim first.
What records help a lamp warranty claim?
Chiller logs, coolant records, lamp settings, photos and curing test records.
How long are UV printer board warranties?
They vary, often from 3 to 12 months depending on supplier. Get terms in writing.
What should I include in a claim message?
Part details, serial number, dates, a factual description, checks performed, evidence and your request.
Can wrong settings void a head warranty?
Yes. Voltages far above recommended values can lead to claim rejection.
Should I photograph parts on arrival?
Yes. Photos show condition on arrival and support claims.
What if the supplier does not respond?
Follow up politely in writing and keep records of all communication.
Do repaired boards have warranty?
Repair shops may offer their own warranty, often short. Get terms in writing.
Can Unified Engineering Dynamics help with warranty questions?
Yes. Our team can explain warranty terms on parts we supply and help with evidence for claims.
Does the machine warranty cover printheads?
Often heads are excluded or covered only for limited periods or defects. Check your machine warranty terms.
Are imported parts harder to claim?
Usually yes, due to shipping and communication. Local warranty from an Indian trader can be worth a slightly higher price.
What if my claim is rejected?
Ask for reasons and evidence in writing, provide additional evidence if appropriate, and fix any root cause identified.
Does installing a part myself void the warranty?
It may, for some suppliers. Ask before installing and record installation steps with photos and videos.
Can insurance cover lightning damage?
Some business insurance covers electrical breakdown or lightning damage. Check your policy and its record requirements.
Is a longer warranty always better?
Not always. A shorter warranty with quick local replacement can be more useful than a longer one with a slow, distant process.