UV Printing

Adding White and Varnish Heads to a UV Flatbed: Carriage Board Upgrade from 2 to 3 or 4 Heads

UV Flatbed White Varnish Heads: Adding a 3rd or 4th Head

Direct answer: Adding UV flatbed white varnish heads, for example moving from two i3200-U1 heads (CMYK + white) to three heads (CMYK + white + varnish), or from four Ricoh heads to six, requires a carriage board and main board that support the higher head count, an extra head with its cable and adapter, an additional ink channel with damper and, for white, circulation, a software licence and settings that include varnish, and enough curing capacity for thicker layers. On many small flatbeds this means replacing the board kit with a 3-head or 4-head version of the same system. Check board capacity, software, ink system, lamp power and mounting space before buying anything.

Adding UV flatbed white varnish heads can open premium spot gloss and raised print work, but only if boards, ink, software and curing are planned together.

UV Flatbed White Varnish Heads: Adding a 3rd or 4th Head
UV Flatbed White Varnish Heads: Adding a 3rd or 4th Head

White and varnish are what make UV flatbed printing valuable: white under colour on clear acrylic and glass, and gloss or raised varnish on visiting cards, trophies, packaging and decor panels. Many shops start with CMYK + white and later want varnish. This guide explains what the upgrade involves, building on our explanation of Hoson, Senyang and BYHX flatbed boards.

Typical flatbed head layouts

LayoutHeadsTypical machines
CMYK + W2 × i3200-U1 or XP600 (one CMYK, one white)A3, A2, 6090
CMYK + W + V3 × i3200-U1 or XP600A2, 6090, some A3
CMYK + W + V (higher speed)4 × i3200-U1 (two CMYK, one W, one V)6090, 1313, 1610
CMYK + W4–5 × Ricoh Gen5/Gen62513
CMYK + W + V6–8 × Ricoh Gen5/Gen62513, 3020

What adding UV flatbed white varnish heads involves

1. Board capacity

A 2-head board cannot drive 3 heads. On most Epson-head flatbeds you need a 3-head or 4-head board set from the same system, often including a new main board. On Ricoh machines, check whether the existing carriage board has spare channels or whether an additional board is required.

2. Head, cable and adapter

The new head needs its own cable, adapter or head board connection and mounting position. Heads must be aligned precisely with the others, which may require a new head plate on small machines.

3. Ink system

Varnish needs its own tank, filter, damper and line. White needs circulation or regular agitation to prevent settling. Adding varnish to a machine without space for another ink channel may require a new ink station.

4. Software and licence

Print control software must support the extra channel, and some licences cover only CMYK + white. The RIP must support varnish layers, spot channels or separate passes. Check both before buying hardware.

5. Curing

Varnish and raised effects use thicker layers that need more UV energy. Check whether the existing lamps and their cooling can cure the extra ink, or whether more passes, higher lamp power or an upgraded lamp are needed. See UV curing problems.

6. Power and cooling

More heads and longer lamp-on times mean more heat on the carriage. Check fans, chiller capacity on water-cooled machines and power supply ratings.

Upgrade paths

Starting pointUpgradeUsual changes
2 × XP600 (CMYK+W)3 × XP600 (add V)3-head board set, head, cable, ink channel, software
2 × XP6002–3 × i3200-U1i3200 board kit, heads, cables, head plate, software, profiles
2 × i3200-U13 × i3200-U13-head i3200 kit, head, cable, ink channel, software
4 × Ricoh Gen5 (CMYK)5–6 × Ricoh (add W, V)Board capacity, heads, cables, ink and circulation, software

Moving from XP600 to i3200-U1 at the same time is a larger project; see our UV flatbed head upgrade guide.

Indicative costs of UV flatbed white varnish heads

ItemIndicative price
Epson i3200-U1 headAbout ₹78,000–95,000 in Indian listings
Epson XP600 headAbout ₹12,000–15,000
Hoson i3200 double-head kit (UV flatbed)About $600–1,120 from China
Ricoh Gen5 headAbout ₹1.25–1.55 lakh in India
Ink channel parts, cable, adapterModest, but add up

Prices exclude shipping, duty, GST and installation. A technician’s time for alignment, calibration and profiles should be budgeted too.

Is the upgrade worth it?

Varnish lets you offer spot gloss, raised textures, Braille-style effects and premium finishes on cards, packaging, awards and decor. If customers ask for these regularly, the upgrade can pay for itself quickly. If varnish work is occasional, compare the cost with outsourcing or with using a separate pass on the existing white channel, which some workflows allow with limitations. Calculate expected monthly varnish jobs, price per job and upgrade cost before deciding.

Planning checklist for UV flatbed white varnish heads

  1. Identify current board system, versions and head count.
  2. Confirm the supplier has a compatible higher-head kit or channel option.
  3. Check mounting space and head plate for the extra head.
  4. Plan the ink channel: tank, filter, damper, line, circulation for white.
  5. Confirm software licence and RIP support for varnish.
  6. Check lamp power, cooling and power supplies.
  7. Budget for alignment, calibration and new profiles.
  8. Get written confirmation of compatibility.

Installation tips for UV flatbed white varnish heads

  • Switch off and isolate power before any board or cable work.
  • Label old cables and photograph connections before removal.
  • Install the new board set following the supplier’s sequence, including firmware.
  • Prime the new head carefully and check for leaks before powering heads.
  • Set the new head’s voltage from its label and temperatures from the ink maker’s guidance.
  • Align heads mechanically and in software, then calibrate bidirectional and step settings.
  • Build or update RIP profiles and test white, colour and varnish together.

Common problems after adding heads

ProblemLikely cause
New head not detectedCable orientation, firmware, licence or board configuration
Varnish tackyInsufficient curing energy, too thick a layer, lamp settings
Misregistration between layersHead alignment or calibration
White settlingCirculation not working or not configured
Carriage overheatingMore heads and lamp time with the same cooling

Example: adding varnish for visiting cards

A Lucknow print shop with a two-head i3200 A3 flatbed received regular requests for spot-gloss visiting cards and wedding invitations. It upgraded to a three-head Hoson kit with a varnish channel. After alignment and new profiles, it began offering raised varnish cards at premium prices, recovering the upgrade cost within a few months.

Example: licence surprise

A unit bought a third head and cable but discovered its software licence only covered two channels. The supplier provided a licence upgrade, but the machine sat idle for a week. Checking the licence first would have avoided the delay.

Head layout and print order for white and varnish

Once extra heads are fitted, the print order matters as much as the hardware. The board and software must fire the right channels in the right sequence for each application.

ApplicationPrint orderNotes
Coloured acrylic or wood, front printWhite, then CMYKWhite base keeps colours bright on dark or coloured surfaces
Clear acrylic, reverse printCMYK, then whiteViewed through the acrylic; white acts as a backing layer
Day-night sign on clear acrylicCMYK, white, CMYKNeeds software support for three layers
Spot gloss cardCMYK, then varnish on selected areasVarnish file prepared as a spot channel
Raised textureCMYK, then several varnish or white passesIncreases job time and curing load
Braille-style dotsMultiple varnish layersCheck local accessibility standards before selling as Braille

Simultaneous printing, where white and colour heads fire in the same pass with an offset, saves time but requires careful head spacing and software support. Sequential printing, layer by layer, is simpler and more forgiving.

Electrical load of extra heads

Each additional head draws power from the carriage supply, mainly through its driver and heater. On small flatbeds the original power supply may have been sized for two heads only. Adding a third or fourth head can push the supply to its limit, particularly when all heads fire solid areas of white and varnish. Signs of an overloaded supply include resets during heavy prints, voltage warnings and heads dropping out on large solid areas. Ask your supplier whether the new kit needs a higher-rated supply, and check that the cabinet has airflow for any extra heat.

Head spacing and alignment

When fitting UV flatbed white varnish heads, every extra head must sit at the same height and angle as existing ones. A head set even half a millimetre higher than its neighbours produces a different dot size and gloss, and a head that is slightly rotated causes misregistration. After fitting, align mechanically using the head plate adjustment screws, then fine-tune in software with alignment prints. Repeat checks after a week, because new mounts can settle.

Ink choice for varnish

Varnish inks vary in viscosity, gloss and curing speed. Some are designed for flat gloss, others for raised effects. Using varnish from the same ink system as your colours generally gives better adhesion and curing compatibility. Before committing to a large purchase, run tests on your common substrates: coated paper cards, acrylic, PVC and wood. Check adhesion with a cross-hatch tape test and look for yellowing after a few days. Our guide to UV print curing and adhesion testing explains simple test methods.

Lamp sizing for thicker layers

A typical air-cooled LED lamp on an A3 flatbed is sized to cure CMYK and a white base at normal speeds. Raised varnish may need extra passes or slower printing to cure fully. On larger machines, water-cooled lamps with higher output handle thick layers better. Signs of under-curing include tacky surfaces, poor scratch resistance and ink smearing when sheets are stacked. Before upgrading lamps, check that existing lamps are clean, at the correct height and running at their rated output, and that cooling is working. See UV LED lamp replacement checks.

Return on investment from UV flatbed white varnish heads

ItemExample
Upgrade cost (board kit, head, parts, installation)Varies widely; get a written quote
Typical varnish jobs per monthCount current enquiries you turn away
Extra margin per varnish jobPremium over CMYK-only price
Payback periodUpgrade cost ÷ monthly extra margin

Shops serving wedding invitations, corporate gifts and premium packaging often see the fastest payback. Shops printing mainly signage boards may find white more valuable than varnish.

Common mistakes when adding UV flatbed white varnish heads

MistakeConsequenceHow to avoid
Buying a head before checking board capacityHead cannot be connectedConfirm board channels first
Ignoring the software licenceExtra channel lockedCheck licence before ordering
No white circulationClogged white head within weeksInstall circulation or agitation
Skipping alignmentMisregistered layersAlign mechanically and in software
Under-sized lampsTacky varnishTest curing on real jobs
Overloaded power supplyResets on heavy printsCheck supply rating
Wrong head variantShort head life with UV inkUse i3200-U1 for UV

White ink maintenance after the upgrade

White is the hardest ink to keep healthy. Its titanium dioxide pigment settles quickly, blocking filters, dampers and nozzles. After adding or relocating a white head, check that the circulation pump runs as configured, shake white ink bottles before filling, replace white filters more often than colour filters, and run a white nozzle check at every shift start. If the machine will stand idle for several days, follow the ink maker’s advice on circulation or flushing. Our guide to UV white ink circulation parts and maintenance covers pumps, filters and dampers in detail.

Varnish channel maintenance

Once UV flatbed white varnish heads are running, remember that varnish is clear, so blocked nozzles are hard to see on a normal nozzle check. Print the varnish nozzle check on black paper or a dark sheet and view it at an angle under light. Clean the varnish head as regularly as the colour heads, and protect it from reflected UV, because cured varnish on a nozzle plate is difficult to remove.

Bottom line

Adding UV flatbed white varnish heads is a system upgrade, not just an extra head. Board capacity, mounting, ink channel, software licence, curing and cooling all need checking. Plan carefully, confirm compatibility in writing, and budget for alignment and profiling, and the upgrade can open profitable premium work.

Further reading: For background on clear coatings and their finishes, see this overview of varnish.

Key takeaways

  • Adding a varnish or extra white head needs a board set that supports the higher head count.
  • Plan the ink channel, including circulation for white.
  • Check software licence and RIP support for varnish.
  • Make sure lamps and cooling can cure thicker layers.
  • Budget for alignment, calibration and profiles.

More in the UV flatbed carriage board series

Related reading on our site: UV flatbed printer spare parts buyer’s guide, UV flatbed boards, cables, motors and interlock spares, UV flatbed printer problems and fixes, Epson i3200 vs XP600 printheads and UV flatbed printer price in India.

Running a UV roll to roll machine as well? The matching guide in our roll to roll series is Adding White and Varnish: Head and Carriage Board Upgrade.

Frequently Asked Questions

Can I add a varnish head to my two-head UV flatbed?

Usually only with a 3-head or 4-head board set from the same system, plus an extra ink channel and software support.

Do I need a new main board to add heads?

On many Epson-head flatbeds the board kit, including the main board, is replaced. On Ricoh machines it depends on spare channels.

What does a varnish head allow me to print?

Spot gloss, raised textures, embossed effects and premium finishes on cards, packaging, awards and decor.

Does varnish need more curing?

Yes. Thicker layers need more UV energy, so check lamp power, cooling and print passes.

Does white ink need special handling?

Yes. White needs circulation or regular agitation to prevent pigment settling.

Will my software support varnish?

Check your print control software licence and RIP. Some licences cover only CMYK and white.

How much does an i3200-U1 head cost?

Indian listings in 2026 ranged from about ₹78,000 to ₹95,000.

Can I switch from XP600 to i3200 at the same time?

Yes, but it is a larger project involving a new board kit, heads, head plate, software and profiles.

Why is my new head not detected?

Common causes are cable orientation, firmware, licence or board configuration.

Why is my varnish tacky?

Usually insufficient curing energy, too thick a layer or incorrect lamp settings.

Is the upgrade worth it?

If customers request varnish regularly, it often pays back within months. For occasional jobs, compare with outsourcing.

Do more heads mean more heat?

Yes. More heads and longer lamp time increase carriage heat, so check fans and chiller capacity.

What should I confirm with the supplier?

Board compatibility, firmware, licence, cables, mounting and installation sequence, in writing.

Can Unified Engineering Dynamics help plan a white or varnish upgrade?

Yes. Our team can check your machine details and supply compatible boards, heads and parts.

What print order is used for clear acrylic?

Reverse printing usually uses CMYK first, then white as a backing layer, viewed through the acrylic.

Will extra heads overload my power supply?

They can on small flatbeds. Ask the supplier whether a higher-rated supply is needed.

Can I use any varnish ink?

Varnish from the same ink system as your colours usually gives better compatibility. Test adhesion and curing first.

How do I check varnish nozzles?

Print the nozzle check on black paper or a dark sheet and view it at an angle under light.

author-avatar

About Avinash Sharma

Avinash Sharma is the founder of Unified Engineering Dynamics (UED), an industrial digital printing machine supplier and engineering consultancy based in Uttar Pradesh, India. He works hands-on with flex printers, eco-solvent printers, UV flatbed and hybrid printers, DTF and sublimation machines, CO2 lasers and CNC routers - from installation and operator training to cost-per-print economics for new printing plants. His guides help first-time buyers across India choose the right machine for their budget, products and city, with honest setup costs and maintenance realities.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *