Direct answer: UV driver board compatibility depends on four things matching: the head type (Ricoh Gen5, Gen5i, Gen6, Konica KM1024i, Kyocera or Epson i3200-U1), the board system (BYHX, Hoson, Senyang, UMC or a manufacturer’s own system), the board version and firmware, and the number of heads and channels. A driver board designed for one head family will not drive another, and boards from different systems are rarely interchangeable, even for the same head. Before buying, photograph labels, connectors and version numbers, note your print control software version, and confirm compatibility with the supplier.
Checking UV driver board compatibility before you order saves weeks of delay and protects your heads from mismatched electronics.

Table of Contents
Ordering the wrong driver board is a common and expensive mistake. Boards that look similar may have different firmware, connector pinouts or voltage ranges. This guide explains the main compatibility factors for UV roll to roll printers in India. It builds on our guides to the UV head driver board and the differences between driver, head and main boards.
Factor 1: head type
Each head family uses different drive voltages, waveforms, connectors and data formats.
| Head | Compatibility notes |
|---|---|
| Ricoh Gen5 / Gen5i | Gen5-specific driver and adapter boards; Gen5i usually uses compatible boards but check |
| Ricoh Gen6 | Needs Gen6-specific boards or explicit Gen6 support; higher frequency waveforms |
| Konica KM1024i | Konica-specific drivers; variants (small, medium, large drop) need matching settings |
| Konica KM512i | Older Konica family, common on solvent machines; different boards from KM1024i |
| Kyocera | High-end heads with specific driver electronics; often tied to machine maker’s system |
| Epson i3200-U1 | Epson-specific driver architecture; common on smaller UV machines with Hoson or Senyang boards |
Our comparison of Konica, Ricoh and Epson printheads explains the head differences.
Factor 2: board system
Chinese UV roll to roll printers commonly use BYHX, Hoson, Senyang or UMC board systems. Each system has its own mainboard, carriage board, driver or adapter boards, firmware and print control software. Boards from different systems generally cannot be mixed. A Hoson driver board will not work with a BYHX mainboard. Some machine makers use their own branded boards based on one of these systems, which adds another layer to check.
Our article on Hoson, Senyang and BYHX boards helps identify your system.
Factor 3: version and firmware
Within one system, board versions change over time. A newer driver or carriage board may need newer mainboard firmware or software. Older boards may not support newer heads. Marketplace listings often specify versions, such as “BYHX V1.7.3 double head main board”, because version matters.
- Record version labels on every board.
- Note firmware and software versions shown in the print control software.
- Ask the supplier whether a replacement board needs firmware updates.
See our guide to UV main board firmware updates.
Factor 4: head count and channels
Driver boards and carriage boards are made for specific head counts: 2, 4, 8 or more heads. A board for 4 heads will not run 8. When adding heads for white or varnish, the board system must support the extra channels. Our article on head upgrades for white and varnish covers this.
Factor 5: connectors and cables
Even within one system, different board revisions may use different connectors or pinouts. Using the wrong cable can damage boards and heads. Match cables to boards and replace cables in sets when changing board versions.
Factor 6: power supply
Driver boards need specific supply voltages. Replacement boards may require different power supplies or connections. Check power requirements before installation.
UV driver board compatibility checklist before ordering
- Photograph both sides of the existing board, including labels and version numbers.
- Photograph connectors and cables.
- Note head type and variant from head labels.
- Note the number of heads and colour layout.
- Note print control software name and version.
- Note the printer model and manufacturer.
- Send all details to the supplier and get written confirmation of compatibility.
- Ask about firmware, settings and return policy.
Common compatibility mistakes
| Mistake | Consequence |
|---|---|
| Ordering by head type only | Board from wrong system; will not communicate |
| Ignoring version numbers | Firmware conflicts; board not recognised |
| Assuming Gen5 and Gen6 boards interchange | Head will not work or may be damaged |
| Using old cables with new boards | Pin mismatch; possible damage |
| Ignoring power requirements | Board fails to start or is damaged |
| Buying a “kit” missing adapters | Incomplete installation |
Upgrades and cross-system changes
Sometimes owners consider changing board system completely, for example from an old system to BYHX or Hoson, or upgrading from Gen5 to Gen6 heads. This usually means replacing the mainboard, carriage board, driver boards, adapters, cables and software together, plus recalibration. It is a major project best handled by experienced technicians. Our article on BYHX vs Hoson main boards discusses system choices.
Indicative prices
| Item | Indicative price | Source |
|---|---|---|
| BYHX G5 driver board | About $200โ220 | Chinese marketplace |
| BYHX V1.7.3 double-head main board | About $180โ210 | Chinese marketplace |
| Hoson Gen5/Gen6 4-head kit | About $1,103 | Chinese marketplace |
| Ricoh Gen6 main board | About $1,420 | Chinese supplier |
| BYHX KM1024 main board | About $550 | Online supplier |
Prices vary by supplier and change often. Add shipping, duty and GST.
Example: wrong system, wasted week
A unit ordered a “Ricoh Gen5 driver board” online based on head type alone. It arrived from a different board system and would not communicate. Returning it took a week. With photos of their existing board, the correct part was identified and installed in a day.
Example: version mismatch
Another unit bought a newer version carriage board from the correct system. The printer did not recognise it until the mainboard firmware was updated. The supplier provided the update and settings, and the board worked. Asking about firmware in advance would have avoided the delay.
How to identify your board system
Many owners do not know which board system their machine uses, especially if the machine was bought second-hand or branded by a local reseller. These clues help:
- Print control software. The name and splash screen often reveal the system. BYHX, Hoson and Senyang each have recognisable software.
- Board labels. Look for printed names, logos, part numbers and version numbers on each board, usually near the edges or on stickers.
- Connector styles. Each system tends to use particular connector types and layouts on the carriage board.
- Dongle or licence key. Some systems use USB dongles that carry the system name.
- Machine documentation. The manual or invoice may list the board system.
Photograph everything and keep it with your machine records. If the labels are unclear, a supplier can often identify the system from photos of the boards and software.
Head variants within one family
Even within one head family, variants matter.
| Family | Variants to check | Why it matters |
|---|---|---|
| Ricoh Gen5 | Gen5 and Gen5i; single and two-colour configurations; different cable lengths | Settings, adapters and supported modes |
| Ricoh Gen6 | Different variants and drop configurations | Board support and waveforms |
| Konica KM1024i | Small, medium and large drop variants | Waveform and drop size settings |
| Epson i3200 | U1 (UV) vs E1 (eco-solvent) vs A1 (water-based) | Ink compatibility; only UV variants suit UV ink |
For Epson heads in particular, using the wrong variant with UV ink can damage the head. Our guide to hybrid UV printer heads discusses Epson variants.
Mixed head machines
Some UV roll to roll printers use different heads for different tasks, such as Ricoh heads for colour and a separate head or group for white and varnish. In these cases, each group may need its own driver configuration. Replacement boards must support the exact configuration, and settings must be correct for each group. Always tell the supplier about every head type on the machine, not just the one that failed.
Software and licensing compatibility
Driver and carriage boards work with a specific print control software. A board from a newer generation may require a newer software version, which in turn may need a licence upgrade or new dongle. Before buying, ask:
- Which software version does the new board require?
- Does my current licence cover that version?
- Will my existing settings and calibration files transfer?
- Does the RIP need updating too?
Our article on main board replacement and licences explains licensing in more detail.
Grey market and copy boards
Marketplaces offer boards described as “compatible” with well-known systems. Some are genuine surplus, some are copies, and quality varies. Copies may use lower-grade components, lack protection features or run older firmware. Risks include early failure and damage to heads. If you buy from marketplaces:
- Ask whether the board is genuine and request photos of the actual item.
- Check seller reviews and history.
- Compare version numbers with your existing board.
- Test carefully before fitting expensive heads.
Our guide to identifying genuine and compatible parts offers more advice.
Keeping a compatibility record
| Item | What to record |
|---|---|
| Printer | Make, model, serial, year |
| Board system | Name and software version |
| Mainboard | Part number, version, firmware |
| Carriage board | Part number, version |
| Driver / adapter boards | Part numbers, versions, quantity |
| Heads | Type, variant, serials, positions |
| Cables | Type, length, quantity |
| Power supplies | Ratings and part numbers |
| Lamps | Wavelength, power, cooling type |
This one page saves enormous time whenever you order parts or call for support.
Compatibility scenarios: worked examples
Real situations show how the compatibility factors combine.
Scenario 1: replacing a failed driver on a four-head Ricoh Gen5 machine
The machine uses a BYHX system with Ricoh Gen5 heads. The owner should order a driver board from the same system, for Gen5, with the same version number or a version the supplier confirms is compatible with the existing mainboard firmware. Cables and adapters stay the same if connectors match. After fitting, head settings are re-entered and checked.
Scenario 2: adding two heads for white and varnish
The owner wants to expand from four to six heads. The existing carriage board supports only four heads. Options include a carriage board and driver set that supports six or more heads, which may require a matching mainboard and software version. The cost includes boards, heads, cables, ink system changes and calibration. Our article on head upgrades for white and varnish covers the full list.
Scenario 3: upgrading from Gen5 to Gen6
Gen6 heads need Gen6-compatible boards, adapters, cables, waveforms and software. In practice, this means a new board kit, plus recalibration. It is not a simple head swap.
Scenario 4: replacing Epson heads on a small UV machine
The machine uses Epson i3200-U1 heads with a Hoson board. The replacement head must be the UV variant, and any replacement board must be the matching Hoson version for i3200. An i3200-E1 head intended for eco-solvent ink should not be used with UV ink.
Scenario 5: second-hand machine with unknown boards
The owner photographs all boards, records software and dongle details, and sends them to a supplier to identify the system before ordering any parts. This avoids guessing and wasted purchases.
Compatibility and ink
Driver compatibility is not only electrical. The waveform loaded through the driver must suit the ink. Changing ink brands may require different waveforms and temperature settings. When you change ink, ask the ink supplier whether they have tested it with your head type and board system, and request recommended settings. Ink and head compatibility is covered in our guide to UV printhead and ink compatibility checks.
Compatibility and lamps
On some machines, lamp control signals pass through the carriage board or a board linked to the driver. Replacing a carriage board may require checking that lamp control connectors and signals match. If lamps fail to switch on after a board change, check lamp signal connections and settings before suspecting the lamps themselves.
Compatibility and calibration files
Print control software stores calibration data such as head alignment, feed compensation, voltages and colour settings. When you replace boards, some of this data may be stored on the board itself and may be lost. Back up all settings and calibration files before replacing any board, and be ready to recalibrate. Ask the supplier which settings are stored on the board and which in the software.
Buying from India vs importing
| Factor | Indian supplier | Direct import |
|---|---|---|
| Price | Usually higher | Usually lower before duty and shipping |
| Delivery time | Days | Often one to three weeks |
| Compatibility support | Local technical help possible | Remote help; language barriers possible |
| Returns | Easier | Difficult and costly |
| GST invoice | Available | Through customs |
For urgent replacements or when compatibility is uncertain, a local supplier who can confirm compatibility is often worth the extra cost. Indian traders, for example, list BYHX KM512 head and main board sets at around โน75,000 with a six-month warranty, which includes local support that imports lack.
Questions to ask before you pay
- Is this board new, refurbished or used, and is it genuine?
- Which head type, variant and head count does it support?
- Which board system and version is it, and which mainboard firmware does it need?
- Do my existing cables and adapters fit, or are new ones included?
- Which software version and licence does it need?
- Will settings stored on the old board need to be re-entered?
- What is the warranty, and what voids it?
- What happens if it turns out to be incompatible?
Getting clear written answers to these questions protects you from the most common and costly compatibility mistakes. If a seller cannot answer them, look for another supplier.
Further reading: Board firmware versions often decide whether a replacement board works with your existing mainboard.
Key takeaways
- UV driver board compatibility depends on head type, board system, version, head count, connectors and power.
- Boards from different systems rarely interchange.
- Gen5 and Gen6 need different boards or explicit support.
- Send photos and details to the supplier and get written confirmation.
- Cross-system changes are major projects requiring complete board sets and recalibration.
More in the UV head driver board series
- UV Roll to Roll Head Driver Board Explained
- Head Driver Board vs Head Board vs Mainboard
- UV Head Driver Board Failure Signs
- Why a Bad Driver Board Can Kill a New Ricoh Head
- Ricoh Gen5/Gen6 Head Voltage and Waveform for UV Ink
- UV Driver Board Repair vs Replacement
- Power Fluctuation: Stabilizer, UPS and Earthing
- UV LED Lamp Cooling, Chillers and Board Overheating
Related reading on our site: UV roll to roll printer price in India, Ricoh Gen5 vs Gen5i printheads, UV LED lamp and module replacement checks, UV curing problems: lamp, ink and power checks and white ink circulation engineering.
Also running solvent or eco-solvent machines? See our sister guides to the solvent flex machine head driver board and the eco-solvent printer fire board.
Frequently Asked Questions
Can I use a Konica driver board with Ricoh heads?
No. Driver boards are specific to head families. Ricoh, Konica, Kyocera and Epson heads need matching boards.
Are BYHX and Hoson boards interchangeable?
Generally no. Each system has its own mainboard, carriage board, firmware and software.
Will a Gen5 driver board work with Gen6 heads?
Only if the board explicitly supports Gen6 with the right settings. Most Gen5-only boards do not.
What information should I send to a supplier?
Photos of board labels, connectors and versions, head type and count, printer model, and software name and version.
Do board versions matter?
Yes. Newer boards may need firmware updates, and older boards may not support newer heads.
Can I reuse old cables with a new board?
Only if the connectors and pinouts match. When in doubt, use cables specified for the new board.
Can I add heads without changing boards?
Only if the board system supports more channels. Otherwise you need boards with more channels.
Is Ricoh Gen5i compatible with Gen5 boards?
Often yes, but confirm with your board supplier and check settings.
Are Kyocera driver boards available separately?
Kyocera heads are usually tied to specific machine maker systems. Ask the machine maker or a specialist supplier.
What happens if I fit an incompatible board?
It may not communicate, may give errors, or in the worst case may damage heads or other boards.
Can I switch board systems?
Yes, but it usually requires replacing all boards, cables and software, plus recalibration.
Can Unified Engineering Dynamics confirm compatibility?
Yes. Send us photos and details and our team will help confirm the correct board for your UV roll to roll printer.
How can I tell which board system my UV printer uses?
Check the print control software name, board labels and logos, connector styles, dongle markings and machine documentation. Suppliers can often identify systems from photos.
Are copy or compatible boards safe to use?
Quality varies. Some work well, while others lack protection features or use lower-grade parts. Buy from reliable sellers and test carefully before fitting expensive heads.
Do I need to recalibrate after replacing a driver board?
Often yes. Re-enter head settings, check alignment and density, and restore calibration files. Some settings may be stored on the board itself.
Can changing ink affect driver compatibility?
Yes. Different inks may need different waveforms and temperatures. Ask the ink supplier for settings tested with your head and board system.
Is it better to buy boards locally or import them?
Imports are usually cheaper but slower and harder to return. Local suppliers cost more but offer faster delivery, compatibility support and easier returns.
What should I do if a new board turns out to be incompatible?
Stop, do not force connections, and contact the supplier with photos and error messages. Agree return terms before buying to make this easier.
Do compatible boards affect head warranty?
They can. Some head suppliers may question claims if non-genuine boards were used. Check warranty terms before buying.